Page 1
DATE: January 18, 2007 BULLETIN NO: 0558007086
TITLE / PRODUCT NAME: Use of m3 Adaptor 0558006476
RATING:
____
DIRECTIVE
(Action is Required)
____
ALERT
(Potential Problem)
____
__X__
INFORMATION
(Action is Optional)
General Distribution
(Unrestricted)
____
____
PRODUCT IMPROVEMENT
(Enhanced Product)
Business Condential
(Restricted Distribution)
ATTENTION
IF YOU HAVE PURCHASED A NEW POWER SUPPLY TO REPLACE A PREVIOUS
DESIGN UNIT, PLEASE READ THE FOLLOWING INFORMATION CAREFULLY.
PRODUCT SERIES / MODEL: See table shown below
Power Supply ESAB P/Ns for Previous Design Units ESAB P/Ns for New Design Units
0558005614 = 400V, 50 / 60 Hz CE 0558006470 = 400V, 50 / 60 Hz CE
EPP-400
EPP-600
0558005615 = 460V, 60 Hz 0558006471 = 460V, 60 Hz
0558005616 = 575V, 60 Hz 0558006472 = 575V, 60 Hz
0558005701 = 400V, 50 / 60 Hz CE 0558007473 = 400V, 50 / 60 Hz CE
0558005702 = 460V, 60 Hz 0558006474 = 460V, 60 Hz
0558005703 = 575V, 60 Hz 0558006475 = 575V, 60 Hz
Page 2
SERIAL NO: Includes all serial numbers
SUMMARY:
supplied with new power supply unit and must be ordered from ESAB Welding and Cutting Products if required.
Adaptor is only used when replacing a previous design power supply with a newer design. Adaptor is not
10 Pin Connector
For Cut / Mark Mode
Interface Cable
24 Pin Connector
To Newer Design
Power Supply
Adaptor
0558006476
19 Pin Connector
For Power Supply
Cable
Loading...