INSTRUCTIONS for
®
F-14-328
February, 1996
INSTRUCTIONS for
F-14-328
February, 1996
®
Gas Meter, P/N 19043
CAUTION: Use gas purge switch on wire feeder or
power source to check gas flow or shut off
wire feed before triggering the torch to avoid
damaging the gas meter.
1. Place conical end of gas meter over end of mig torch
nozzle or tig torch gas shielding cup.
2. Position torch so that the gas
meter is in the vertical position.
3.
With the argon or argon
mixed gas flowing, read
the meter at the center
of the ball.
ESAB
F-14-328 2/96 1M Printed in U.S.A.
ESAB Welding & Cutting Products
PO Box 100545, Florence SC 29501-0545
Gas Meter, P/N 19043
CAUTION: Use gas purge switch on wire feeder or
power source to check gas flow or shut off
wire feed before triggering the torch to avoid
damaging the gas meter.
1. Place conical end of gas meter over end of mig torch
nozzle or tig torch gas shielding cup.
2. Position torch so that the gas
meter is in the vertical position.
3.
With the argon or argon
mixed gas flowing, read
the meter at the center
of the ball.
ESAB
F-14-328 2/96 1M Printed in U.S.A.
ESAB Welding & Cutting Products
PO Box 100545, Florence SC 29501-0545
INSTRUCTIONS for
®
F-14-328
February, 1996
Gas Meter, P/N 19043
CAUTION: Use gas purge switch on wire feeder or
power source to check gas flow or shut off
wire feed before triggering the torch to avoid
damaging the gas meter.
1. Place conical end of gas meter over end of mig torch
nozzle or tig torch gas shielding cup.
2. Position torch so that the gas
meter is in the vertical position.
3.
With the argon or argon
mixed gas flowing, read
the meter at the center
of the ball.
INSTRUCTIONS for
®
F-14-328
February, 1996
Gas Meter, P/N 19043
CAUTION: Use gas purge switch on wire feeder or
power source to check gas flow or shut off
wire feed before triggering the torch to avoid
damaging the gas meter.
1. Place conical end of gas meter over end of mig torch
nozzle or tig torch gas shielding cup.
2. Position torch so that the gas
meter is in the vertical position.
3.
With the argon or argon
mixed gas flowing, read
the meter at the center
of the ball.
ESAB
F-14-328 2/96 1M Printed in U.S.A.
ESAB Welding & Cutting Products
PO Box 100545, Florence SC 29501-0545
ESAB
F-14-328 2/96 1M Printed in U.S.A.
ESAB Welding & Cutting Products
PO Box 100545, Florence SC 29501-0545
Loading...