www.esabna.com
DATE: May 24, 2005 BULLETIN NO: M_05_005
TITLE/ PRODUCT NAME: Migmaster 250 Capacitor Bank Short
RATING:
_
(Action is Required) (Potential Problem)
XX
(Action is Optional) (Enhanced Product)
XX
(Unrestricted) (Restricted Distribution)
PRODUCT SERIES/ MODEL: MM250
SERIAL NO: MBGJ402009 through current
SUMMARY: An assembly error may allow a mounting screw to damage the output filter
capacitors.
OPERATIONAL IMPACT: When the screw shorts to the case of the capacitor, arcing can occur
damaging the filter network.
ACTION: Remove the bottom, right, side panel. Locate the output filter assembly (C2-C6).
Inspect the mounting screws used to secure C2-C7 to the holding bracket of the MM250, If the
screw on either end is touching the capacitor it must be re placed w ith a shorter screw . See
enclosed photographs.
Record the machine serial number and call ESAB Technical Support for replacement screws.
Phone 843-664-4416,
Fax us the serial number and your address to 843-664-5539 or you can Email the information to
support@esab.com.
CONTACT:
ESAB Welding & Cutting Products
Product & Service Information Group
843-664-4416 Phone
843-664-5539 FAX
_ DIRECTIVE XX ALERT
INFORMATION _ _ PRODUCT IMPROVEMENT
General Distribution _ _ Business Confidential
Loading...