F-14-480
June, 1996
F-14-480
June, 1996
GOUGING SHIELD ASSEMBLY
P/N 20378
This 2-piece gouging shield assembly is designed for
use with the PT-121 torch. It is used in place of a st andard heat shield for gouging applications. For operating details on gouging refer to the booklet covering the
PT-121 torch, F-12-794 or “Plasmarc Gouging Guide”,
F-7080, which is packed with each PCM-150 power
source. The guide is also available from any ESAB distributor.
Assemble shield to this
Push shield into
adaptor with a
twisting motion
until first O-ring
engages internal
groove of adaptor.
ADAPTOR20379
ESAB Welding & Cutting Products
PO Box 100545, SC 29501-0545
F-14-480 6/96 1M Printed in U.S.A.
end of adaptor.
SHIELD 20380
O-RING- 994092
(lubricate with silicone grease)
GOUGING SHIELD ASSEMBLY
P/N 20378
This 2-piece gouging shield assembly is designed for
use with the PT-121 torch. It is used in place of a st andard heat shield for gouging applications. For operating details on gouging refer to the booklet covering the
PT-121 torch, F-12-794 or “Plasmarc Gouging Guide”,
F-7080, which is packed with each PCM-150 power
source. The guide is also available from any ESAB distributor.
Assemble shield to this
Push shield into
adaptor with a
twisting motion
until first O-ring
engages internal
groove of adaptor.
ADAPTOR20379
ESAB Welding & Cutting Products
PO Box 100545, SC 29501-0545
F-14-480 6/96 1M Printed in U.S.A.
end of adaptor.
SHIELD 20380
O-RING- 994092
(lubricate with silicone grease)
F-14-480
June, 1996
GOUGING SHIELD ASSEMBLY
P/N 20378
This 2-piece gouging shield assembly is designed for
use with the PT-121 torch. It is used in place of a st andard heat shield for gouging applications. For operating details on gouging refer to the booklet covering the
PT-121 torch, F-12-794 or “Plasmarc Gouging Guide”,
F-7080, which is packed with each PCM-150 power
source. The guide is also available from any ESAB distributor.
Assemble shield to this
Push shield into
adaptor with a
twisting motion
until first O-ring
engages internal
groove of adaptor.
ADAPTOR20379
end of adaptor.
SHIELD 20380
O-RING- 994092
(lubricate with silicone grease)
F-14-480
June, 1996
GOUGING SHIELD ASSEMBLY
P/N 20378
This 2-piece gouging shield assembly is designed for
use with the PT-121 torch. It is used in place of a st andard heat shield for gouging applications. For operating details on gouging refer to the booklet covering the
PT-121 torch, F-12-794 or “Plasmarc Gouging Guide”,
F-7080, which is packed with each PCM-150 power
source. The guide is also available from any ESAB distributor.
Assemble shield to this
Push shield into
adaptor with a
twisting motion
until first O-ring
engages internal
groove of adaptor.
ADAPTOR20379
end of adaptor.
SHIELD 20380
O-RING- 994092
(lubricate with silicone grease)
ESAB Welding & Cutting Products
PO Box 100545, SC 29501-0545
F-14-480 6/96 1M Printed in U.S.A.
ESAB Welding & Cutting Products
PO Box 100545, SC 29501-0545
F-14-480 6/96 1M Printed in U.S.A.
Loading...