Supplement to Manual 0558000881
ESP-100i
CE Filter Modification
USER RESPONSIBILITY
This equipment will perform in conformity with the description thereof contained in this manual and accompanying labels
and/or inserts when installed, operated, maintained and repaired in accordance with the instructions provided. This
equipment must be checked periodically. Malfunctioning or poorly maintained equipment should not be used. Parts that
are broken, missing, worn, distorted or contaminated should be replaced immediately. Should such repair or replacement
become necessary, the manufacturer recommends that a telephone or written request for service advice be made to the
Authorized Distributor from whom it was purchased.
This equipment or any of its parts should not be altered without the prior written approval of the manufacturer. The user
of this equipment shall have the sole responsibility for any malfunction which results from improper use, faulty maintenance,
damage, improper repair or alteration by anyone other than the manufacturer or a service facility designated by the
manufacturer.
Revision OR
0558004725 02 / 2004
INSTALLATION
This supplement documents the production substitution of the EMI Filter (35970) with EMI Filter (0455803881). Care
should be taken not to move or remove the existing Kydex insulator. If the Kydex insulator is missing or damaged a new
one (0558004329) should be installed prior to mounting the EMI filter.
MAINS
T3 on main
To T1, T2 and
contactor (K1)
EMI Filter (3 x 35 Amp) - ESAB Part Number 0455803881
MAINS - 400V / 47A
LOAD
LOAD
To A, B and
C taps on T2
Loading...