A2- A6 Process
Control System
112101103105107109111102021110025108024042106023061104022041100020040060001
Installation manual
0458 081 074 2005--12--19
ENGLISH 3..............................................
Rights reserved to alter specifications without notice.
-- 2 --
ENGLISH
1 INSTALLATION 4....................................................
TOCe
-- 3 --
1 INSTALLATION
Follow the instructions below when installing the PEH, I/O board or PEH analogue
board kit.
S Check if you have received all of the items listed in the packing list 457 975 000
or 457 976 000.
S Install the boards inside shielded enclosures and use only screened cables
between units, (see proposed article numbers for cables).
Metal compression glands (article number 194 084 003 or similar) must be used.
S The PEH software must be version PEH3.0 or higher.
S The “Jumper” (end of bus connection) inside the PEH unit (BY1) must be
removed and placed on the board located at the end of the bus (between contact
A and B).
S DIP switch SW1 in the PEH unit must be set as follows:
Set all poles to “Closed” position.
S See Service manual PEH (order number 0740 801 xxx), for information on how
to use the PEH.
fgc3i1ea
-- 4 --
LAF or TAF
motor drive unit
the customer
1 456 500 xxx Control cable
3, 4 191 812 101 Bus cable
2, 5, 7 193 021 110 Supply voltage
6 443 754 001 Roller bed
8 457 975 880 I/O board kit
9 457 976 880 Analogue board kit
10 443 741 880 PEH
11 Power source
12 Roller bed or
Cable no. Article no. Denomination
K14.1, K14.2 42 V AC (cable 2).
K9.3, K9.4 Bus out (cable 3)...
Remove the “Jumper” (BY1) from the PEH unit.
Setting the DIP switch SW1:
Set all poles to “Closed” position.
13 To be made by Remote control
C1 0 V in...
A1, A2 Bus in (cable 3)...
A3, A4 42 V AC (cable 2)...
B1, B2 Bus out (cable 4)...
B3, B4 42 V AC (cable 5)...
Remove the “Jumper” (BY1) from here.
Place the “Jumper” (BY1) here.
C10 +24 V in..
-- 5 --
A1, A2 Bus in (cable 4)...
A3, A4 42 V AC (cable 5)...
C15 0 V......
C16 Speed ref 0 --10 V DC......
C12, C13 Backward.
C8, C9 Forward...
-- 6 --
LAF or TAF
the customer
1 456 500 xxx Control cable
3 191 812 101 Bus cable
2, 7 193 021 110 Supply voltage
8 457 975 880 I/O board kit
10 443 741 880 PEH
11 Power source
Cable no. Article no. Denomination
K14.1, K14.2 42 V AC (cable 2).....
K9.3, K9.4 Bus out (cable 3).......
Remove the “Jumper” (BY1) from the PEH unit.
Setting the DIP switch SW1:
Set all poles to “Closed” position.
13 To be made by Remote control
C1 0 V in...
C10 +24 V in..
Place the “Jumper” (BY1) here.
A1, A2 Bus in (cable 3)...
A3, A4 42 V AC (cable 2)...
B1, B2 Bus out (cable 4)...
B3, B4 42 V AC (cable 5)...
-- 7 --
-- 8 --
Setting the DIP switch SW1:
Set all poles to “Closed” position.
LAF or TAF
drive unit
1 456 500 xxx Control cable
2 193 021 110 Supply voltage
3 191 812 101 Bus cable
6 443 754 001 Roller bed
9 457 976 880 Analogue board kit
10 443 741 880 PEH
11 Power source
Cable no. Article no. Denomination
Remove the “Jumper” (BY1) from the PEH unit.
12 Roller bed or motor
K14.1, K14.2 42 V AC (cable 2)..
K9.3, K9.4 Bus out (cable 3)....
Place the “Jumper” (BY1) here.
-- 9 --
A1, A2 Bus in (cable 3)..
A3, A4 42 V AC (cable 2)..
C15 0 V......
C16 Speed ref 0--10 V DC......
C12, C13 Backward..
C8, C9 Forward....
-- 1 0 --
-- 1 1 --
-- 1 2 --
-- 1 3 --
ESAB subsidiaries and representative offices
Europe
AUSTRIA
ESAB Ges.m.b.H
Vienna--Liesing
Tel: +43 1 888 25 11
Fax: +43 1 888 25 11 85
BELGIUM
S.A. ESAB N.V.
Brussels
Tel: +32 2 745 11 00
Fax: +32 2 745 11 28
THE CZECH REPUBLIC
ESAB VAMBERK s.r.o.
Prague
Tel: +420 2 819 40 885
Fax: +420 2 819 40 120
DENMARK
Aktieselskabet ESAB
Copenhagen--Valby
Tel:+4536300111
Fax:+4536304003
FINLAND
ESAB Oy
Helsinki
Tel: +358 9 547 761
Fax: +358 9 547 77 71
FRANCE
ESAB France S.A.
Cergy Pontoise
Tel:+33130755500
Fax:+33130755524
GERMANY
ESAB GmbH
Solingen
Tel: +49 212 298 0
Fax: +49 212 298 218
GREAT BRITAIN
ESAB Group (UK) Ltd
Waltham Cross
Tel: +44 1992 76 85 15
Fax: +44 1992 71 58 03
ESAB Automation Ltd
Andover
Tel: +44 1264 33 22 33
Fax: +44 1264 33 20 74
HUNGARY
ESAB Kft
Budapest
Tel:+3612044182
Fax:+3612044186
ITALY
ESAB Saldatura S.p.A.
Mesero (Mi)
Tel:+3902979681
Fax:+390297289181
THE NETHERLANDS
ESAB Nederland B.V.
Utrecht
Tel: +31 30 2485 377
Fax: +31 30 2485 260
NORWAY
AS ESAB
Larvik
Tel:+4733121000
Fax:+4733115203
POLAND
ESAB Sp.zo.o.
Katowice
Tel: +48 32 351 11 00
Fax: +48 32 351 11 20
PORTUGAL
ESAB Lda
Lisbon
Tel: +351 8 310 960
Fax: +351 1 859 1277
SLOVAKIA
ESAB Slovakia s.r.o.
Bratislava
Tel:+421744882426
Fax:+421744888741
SPAIN
ESAB Ibérica S.A.
Alcalá de Henares (MADRID)
Tel: +34 91 878 3600
Fax: +34 91 802 3461
SWEDEN
ESAB Sverige AB
Gothenburg
Tel:+4631509500
Fax:+4631509222
ESAB international AB
Gothenburg
Tel:+4631509000
Fax:+4631509360
SWITZERLAND
ESAB AG
Dietikon
Tel: +41 1 741 25 25
Fax: +41 1 740 30 55
North and South America
ARGENTINA
CONARCO
Buenos Aires
Tel: +54 11 4 753 4039
Fax: +54 11 4 753 6313
BRAZIL
ESAB S.A.
Contagem--MG
Tel: +55 31 2191 4333
Fax: +55 31 2191 4440
CANADA
ESAB Group Canada Inc.
Missisauga, Ontario
Tel: +1 905 670 02 20
Fax: +1 905 670 48 79
MEXICO
ESAB Mexico S.A.
Monterrey
Tel: +52 8 350 5959
Fax: +52 8 350 7554
USA
ESAB Welding & Cutting Products
Florence, SC
Tel: +1 843 669 44 11
Fax: +1 843 664 57 48
Asia/Pacific
CHINA
Shanghai ESAB A/P
Shanghai
Tel: +86 21 5308 9922
Fax: +86 21 6566 6622
INDIA
ESAB India Ltd
Calcutta
Tel: +91 33 478 45 17
Fax: +91 33 468 18 80
INDONESIA
P.T. ESABindo Pratama
Jakarta
Tel: +62 21 460 0188
Fax: +62 21 461 2929
JAPAN
ESAB Japan
Tokyo
Tel: +81 3 5296 7371
Fax: +81 3 5296 8080
MALAYSIA
ESAB (Malaysia) Snd Bhd
Selangor
Tel: +60 3 8027 9869
Fax: +60 3 8027 4754
SINGAPORE
ESAB Asia/Pacific Pte Ltd
Singapore
Tel: +65 6861 43 22
Fax: +65 6861 31 95
SOUTH KOREA
ESAB SeAH Corporation
Kyungnam
Tel: +82 55 269 8170
Fax: +82 55 289 8864
UNITED ARAB EMIRATES
ESAB Middle East FZE
Dubai
Tel: +971 4 887 21 11
Fax: +971 4 887 22 63
Representative offices
BULGARIA
ESAB Representative Office
Sofia
Tel/Fax: +359 2 974 42 88
EGYPT
ESAB Egypt
Dokki--Cairo
Tel: +20 2 390 96 69
Fax: +20 2 393 32 13
ROMANIA
ESAB Representative Office
Bucharest
Tel/Fax: +40 1 322 36 74
RUSSIA
LLC ESAB
Moscow
Tel: +7 095 543 9281
Fax: +7 095 543 9280
LLC ESAB
St Petersburg
Tel: +7 812 336 7080
Fax: +7 812 336 7060
Distributors
For addresses and phone
numbers to our distributors in
other countries, please visit our
home page
www.esab.com
ESAB AB
SE--695 81 LAXÅ
SWEDEN
Phone +46 584 81 000
www.esab.com
05 11118
Loading...