Erreka Bul Swing Gate Opener, Ares Swing Gate Opener User Manual

INDEX

General Safety Instructions 26

Symbols used in this manual__________________________________ 26
Importance of this manual ___________________________________ 26
Envisaged use______________________________________________ 26
Installer's qualifications ______________________________________ 26
Automatic operation safety elements __________________________ 26

Description of the product 27

Elements of the complete installation __________________________ 27
Operator features___________________________________________ 28
Declaration of Conformity ___________________________________ 28

Installation 29

Tools and materials _________________________________________ 29
Initial conditions and checks __________________________________ 29
Unpacking_________________________________________________ 30
Manual operation __________________________________________ 30
Operator installation ________________________________________ 31
Electrical connections _______________________________________ 33
Final checks________________________________________________ 34

English

Maintenance and diagnosis of failures 35

Maintenance_______________________________________________ 35
Failure diagnosis____________________________________________ 35
Scrap _____________________________________________________ 35
Spare parts ________________________________________________ 35

ARES_TOC.fm - 22/7/11

ARES electro-mechanical operator 25

GENERAL SAFETY INSTRUCTIONS

1

This manual uses symbols to highlight specific texts. The
functions of each symbol are explained below:

SYMBOLS USED IN THIS MANUAL

 Failure to respect the safety warnings could

lead to accident or injury.

2

IMPORTANCE OF THIS MANUAL

 Read this manual in its entirety before carrying

out the installation, and obey all instructions.
Failure to do so may result in a defective
installation, leading to accidents and failures.

3

This device has been designed for installation as part of
an automatic opening and closing system for swing
doors and gates.

ENVISAGED USE

 This device is not suitable for installation in

inflammable or explosive environments.

Important details which must be respected for

correct assembly and operation.

 Additional information to help the installer.

} Information on care for the environment.

 Moreover, this manual provides valuable

information which will help you to carry out
installation more efficiently.

This manual is an integral part of the product. Keep

for future reference.

 Failure to install or use as indicated in this

manual is inappropriate and hazardous, and
could lead to accidents or failures.

 The installer shall be responsible for ensuring

the installation is set up for its envisaged use.

4

INSTALLER'S QUALIFICATIONS

 The installation should be completed by a professional installer, complying with the following

requirements:

• He/she must be capable of carrying out
mechanical assemblies in doors and gates,
choosing and implementing attachment
systems in line with the assembly surface
(metal, wood, brick, etc) and the weight and
effort of the mechanism.

• He/she must be capable of carrying out
simple electrical installations in line with the
low voltage regulations and applicable
standards.

 The installation should be carried out bearing in mind standards EN 13241-1 and EN 12453.

5

This device complies with all current safety regulations.
However, the complete system comprises, apart from
the operator referred to in these instructions, other
elements which should be acquired separately.



AUTOMATIC OPERATION SAFETY ELEMENTS

The safety of the complete installation depends on
all the elements installed. Install only Erreka
components in order to guarantee proper operation.

 Respect the instructions for all the elements

positioned in the installation.

 We recommend installing safety elements.

 For further details, see “Fig. 1 Elements of the

complete installation” on page 27.

26 Installation Manual

Seguridad_68 v0.0.fm - 22/7/11

DESCRIPTION OF THE PRODUCT

English

1

ELEMENTS OF THE COMPLETE INSTALLATION

INSTALLATION COMPONENTS:
1 Operator
2 Flashing light
3 Exterior photocells
4 Key switch
5 Wall pushbutton
6 Switchboard
7 Connections box
8 Interior photocells
9 Electrolock
10 Stop on closing
11 Antenna

 We recommend using the VIVO-M201(M) or VIVO-M101(M) switchboard for the 125/230VAC models

and the VIVO-D201(M) switchboard for the 24VDC models.

ELECTRICAL CABLING:
Element Nº wires x section Maximum length

A: Main power supply 3x1.5mm

B: Flashing light 2x0.5mm

C: Photocells (Tx / Rx) 2x0.5mm

D: Pushbutton or key switch 2x0.5mm

E: Operator (125/230 VAC) 4x1mm

E: Operator (24VDC) 2x1mm
F: Antenna Coaxial cable 50k (RG-58/U) 5m

2

2

2

/ 4x0.5mm

2

2

2

30m

20m

2

30m

25m

20m

8m (maximum 25m with cable 2x2.5mm2)

Fig. 1 Elements of the complete installation

 The safe and correct operation of the

installation is the responsibility of the installer.

Descripcion_68 v0.2.fm - 22/7/11

For greater safety, Erreka recommends installing the

photocells (3) and (8).

ARES electro-mechanical operator 27

DESCRIPTION OF THE PRODUCT

2

Model

Power supply (V/Hz) 24Vdc 220-230/

Max absorbed current (A) 5,5 0,9 1,2 1,2 4,6 1,2 1,2
Power consumed (W) 70 180 350 350 350 350 350
Capacitor (μF) – 6,3 8 8 25 8 8
Protection class (IP) 43 43 43 43 43 43 43
Maximum thrust (N) 1.500 1.600 2.200 2.200 1.250 2.200 2.200
Speed (rpm) 1.600 1.400 1.400 900 1.400 900 900
Spindle speed (m/s) 0,019 0,018 0,018 0,012 0,018 0,018 0,012
Stroke (mm) 300 300 300 400 300 300 400
Opening time(s) 16 17 17 33 17 17 33
Locking Yes Yes Yes Yes Yes No No
Operating temperature (ºC) -25/+60 -25/+60 -25/+60 -25/+60 -25/+60 -25/+60 -25/+60
Thermal protector (ºC) – 150 150 150 150 150 150
Duty cycle (%) 80 25 35 35 25 35 35
Maximum weight of the

leaf (kg) (see “Limits on
Use”)

Maximum leaf size
"Limits on use")

OPERATOR FEATURES

AE3324I

AE3324D

200 200 250 250 250 250 250

(m)

(See

2,5 2,5 3 4 3 3 4

AE33IPL

AE33DPL

50-60

BGRBI

BGRBD

220-230/

50-60

BGRBIL

BGRBDL

220-230/

50-60

BGRBIM

BGRBDM

110-125

50-60

BGRRI

BGRRD

220-230/

50-60

BGRRIL

BGRRDL

220-230/

50-60

Limits on use

AE3324I-AE3324D
AE33IPL-AE33DPL

BGRBI-BGRBD; BGRBIM-BGRBDM;

BGRRI-BGRRD

We recommend using an electrolock for leaf

lengths of over 1.8m.

3

Erreka Automatismos declares that the ARES
electromechanical operator has been designed for use in a
machine or for assembly along with other elements in order
to form a machine in line with
successive modifications.

The ARES electromechanical operator allows us to carry
out installations in line with the standards EN 13241-1
and EN 12453.

DECLARATION OF CONFORMITY

Directive 89/392 EEC and

BGRBIL-BGRBDL;

BGRRIL-BGRRDL

Values for orientation purposes. The form of the

leaf and the presence of strong wind may bring
notable differences in the values of the chart.

The ARES electromechanical operator complies with
safety legislation in line with the following directives
and standards:

• 73/23 EEC and successive modification 93/68 EEC

• 89/366 EEC and successive modifications 92/31 EEC

and 93/68 EEC

• UNE-EN 60335-1

Descripcion_68 v0.2.fm - 22/7/11

28 Installation Manual