ERNITEC ERIS 3000 Setup Manual

Download

Page 1

ERIS H.264 DVR

OSD Setup Manual

Version 2

www.ernitec.com

Page 2

OSD Setup Manual

Table of Contents

Menu System Overview.....................................................................................................8

< Username and Password >.......................................................................................8

<Key Usage>................................................................................................................9

 Key Usage in OSD Menu ...............................................................................9

 Key Usage in Virtual Keyboard.......................................................................9

System Setup ................................................................................................................... 11

<Version> ................................................................................................................... 11

 Model Name ................................................................................................. 11

 Video System ............................................................................................... 11

 Hardware......................................................................................................11

 Software ....................................................................................................... 11

 MAC Address 1 ............................................................................................12

 Software Upgrade via Local Device .............................................................12

<Language> ...............................................................................................................12

<Date / Time>.............................................................................................................13

 Date /

 Date/Time Display ........................................................................................13

 Date Display Mode .......................................................................................13

 T

Time...................................................................................................13

ime Display Mode.......................................................................................13

 Date/Time Order...........................................................................................13

 Daylight Saving Time Setup .........................................................................14

- Daylight Saving Time ......................................................................14

- DST Start / End ...............................................................................14

- DST Bias.........................................................................................14

www.ernitec.com

Page 3

OSD Setup Manual

<Unit Name> ..............................................................................................................15

<User Management>..................................................................................................15

 Password Protection ....................................................................................15

 Account Setup ..............................................................................................15

 Authority Setup.............................................................................................16

 Load Default Setting.....................................................................................16

<Network Setup>........................................................................................................17

 LAN Select ...................................................................................................17

 LAN Setup ....................................................................................................17

- DHCP..............................................................................................18

- IP ....................................................................................................18

- Netmask..........................................................................................18

- Gateway..........................................................................................18

- DNS ................................................................................................19

- PPPoE Account...............................................................................19

- PPPoE Password............................................................................20

- PPPoE Max Idle..............................................................................20

- Connect At Booting .........................................................................20

- Network Restart ..............................................................................20

 T

rigger Port ..................................................................................................20

 Email Address ..............................................................................................20

 SMTP Setup .................................................................................................21

- Email via SMTP

..............................................................................21

- SMTP Server ..................................................................................21

- SMTP Port ......................................................................................22

- SMTP Account ................................................................................22

- SMTP Password .............................................................................22

 DDNS Setup.................................................................................................22

- Enable DDNS..................................................................................23

- Host Name ......................................................................................23

www.ernitec.com

Page 4

OSD Setup Manual

- DDNS Port ......................................................................................23

- Submit/ Update ...............................................................................24

- ezDDNS..........................................................................................24

<RS485 Setup>..........................................................................................................24

 Unit ID ..........................................................................................................24

 Baud Rate ....................................................................................................24

 Bits ...............................................................................................................25

 S

 Parity

top ..............................................................................................................25

............................................................................................................25

<Audio Output/ Key Beep>.........................................................................................25

 Audio Output ................................................................................................25

 Key Beep......................................................................................................25

<IP Camera Support>.................................................................................................26

Monitor Setup...................................................................................................................27

<Show Camera Title>.................................................................................................27

<Screen Center Adjust> .............................................................................................27

<VGA Resolution>......................................................................................................27

<Show Color Bar> ......................................................................................................27

Camera Setup

...................................................................................................................28

......................................................................................................28

 Analog Camera Select

.................................................................................28

 Dome Protocol..............................................................................................28

 Dome ID

.......................................................................................................28

 Camera Title.................................................................................................28

 Covert...........................................................................................................29

 Brightness ....................................................................................................29

www.ernitec.com

Page 5

OSD Setup Manual

 Contrast........................................................................................................29

 Saturation.....................................................................................................29

 Hue...............................................................................................................29

<IP Camera>..............................................................................................................30

 IP Camera Select .........................................................................................30

 IP Camera Title.............................................................................................30

 Hostname/IP.................................................................................................31

 Model ...........................................................................................................31

 Connection Setup.........................................................................................31

- Account...........................................................................................31

- Password ........................................................................................31

- Management Port ...........................................................................31

- Streaming Format ...........................................................................31

- Advance Streaming Option .............................................................31

- Streaming Port ................................................................................32

- Streaming Protocol..........................................................................32

- IP Dome Protocol............................................................................32

 Device Setup

- Product ID

................................................................................................32

.......................................................................................33

- Image Resolution/ FPS/ Compression/ Quality ...............................33

- Sharpness/ Brightness/ Contrast/ Saturation/Hue...........................33

- Apply...............................................................................................33

 Activated.......................................................................................................34

 Status ...........................................................................................................34

Record Setup

...................................................................................................................35

 Record Resolution........................................................................................35

...............................................................................................35

www.ernitec.com

Page 6

OSD Setup Manual

 Record Format .............................................................................................35

 Max Rec PPS ...............................................................................................36

<Schedule Setup>......................................................................................................36

 Day / Night Time Start...................................................................................36

 Day / Night Time End ...................................................................................36

 Weekend Schedule ......................................................................................37

 Weekend Start/ End......................................................................................37

<Preset Record Configuration> ..................................................................................37

<Per Camera Config> ................................................................................................38

 Camera Select..............................................................................................38

 Normal PPS..................................................................................................38

 Normal Qlty ..................................................................................................38

 Event Max PPS ............................................................................................38

 Event Qlty

.....................................................................................................39

 Event Active..................................................................................................39

.....................................................................................................39

< Data Lifetime > ........................................................................................................40

<Circular Recording> .................................................................................................40

< Audio Recording > ...................................................................................................40

<Purge Data> .............................................................................................................41

 Purge All Data ..............................................................................................41

 Purge All Event Data ....................................................................................41

 Purge Event Before ......................................................................................41

 Start to Purge ...............................................................................................41

www.ernitec.com

Page 7

OSD Setup Manual

Sequence Setup...............................................................................................................42

<Main / Call Monitor Dwell>........................................................................................42

<Main / Call Monitor Schedule> .................................................................................42

Event Setup ......................................................................................................................43

<Internal Buzzer> .......................................................................................................43

<Event Icon> ..............................................................................................................43

< Email Notice > .........................................................................................................43

< Email Attachment > .................................................................................................44

< Event Full Screen >.................................................................................................44

<Event Duration> .......................................................................................................44

<Per Channel Config>................................................................................................44

 Channel Select .............................................................................................44

 Video Loss Detect ........................................................................................45

 Motion Detect ...............................................................................................45

 Motion Detect Indicator ................................................................................45

 Detection Configuration................................................................................45

- Detected Area Setup.......................................................................45

- Sensitivity........................................................................................46

- Block Threshold ..............................................................................46

 Alarm In

 Alarm Out

Database Setup

<Total / Fre

e Size> .....................................................................................................47

........................................................................................................46

.....................................................................................................46

................................................................................................................47

< Avail. Rec Time > ....................................................................................................47

<Internal Disks> .........................................................................................................47

Configuration ...................................................................................................................49

<Load Factory Default>..............................................................................................49

<Import Configuration>...............................................................................................49

<Export Configuration> ..............................................................................................50

 Copy Destination ..........................................................................................50

 Configuration Name .....................................................................................50

www.ernitec.com

Page 8

OSD Setup Manual

 Begin Export.................................................................................................50

Shutdown .........................................................................................................................51

 Power Off .....................................................................................................51

 Reboot..........................................................................................................51

Appendix A: ezRecord Diagram Samples......................................................................52

Appendix B: Record Duration.........................................................................................55

Appendix C: DVRPlayer ..................................................................................................58

Appendix D: Operating USB Mouse on the DVR...........................................................63

Appendix E: HDD Copy Tool (EXT2IFS).........................................................................64

www.ernitec.com

Page 9

OSD Setup Manual

Menu System Overview

The detailed functions and settings of ERIS H.264 DVR can be set by entering the intuitive

Graphical User Interface (GUI) OSD setup menu. Collaborating with a USB mouse, setting

up the DVR can be easy as operating on a PC. This chapter particularizes the items and

options in the OSD setup menu.

< Username and Password >

Press MENU and input a valid username. There are two preset accounts: “admin” and

“user”. The default username “admin” can be inputted via pressing the hot key MENU, while

“user” can be inputted via pressing the hot key SEARCH. Move to <OK> and press ENTER

to proceed.

Input Username

A B C D E F G H I J K L M N O P QRSTUVWXYZ a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 . ! @ # − _ , “ + = *

◄ ► Backspace Delete Cancel OK

The next step is to enter a corresponding password. The preset password for “admin” is

“1234”, and the password “4321” is for “user”.

Password Verification

____________

Press Channel Keys To Enter Password

(4-8 Digits)

Press ◄ Key To Delete

NOTE: It is strongly suggested to change the preset password to prevent

unauthorized access to the unit.

An icon displayed at the upper-right corner of the screen will show the authority level of the

account. Under logout condition, the icon will show “N”. When an account is logged in, its

authority level number (1~8) will be shown.

Before completely logout, other functions can also be accessed without having to login

again. There are two ways to logout: manually logout by pressing ESC key at Live mode, or

auto logout after 5 minutes idle time at Live/ Menu mode.

www.ernitec.com

Page 10

OSD Setup Manual

<Key Usage>

The key usage differs under the OSD menu and in the Virtual keyboard. The difference can

be seen while setting some items, such as Unit Name and IP Address.

 Key Usage in OSD Menu

The following introduce some keys used frequently to setup the unit via the OSD

menu.

In the OSD menu, Direction Keys are used to move the cursor to previous or next

fields. UP / DOWN are used to change the value in the selected field.

<ENTER>

In OSD menu or selection interface, press the key to make selection or save

settings.

<ESC>

Press to cancel or exit from certain OSD menu without saving any changes.

 Key Usage in Virtual Keyboard

A virtual keyboard shows up while editing settings such as camera title, unit name,

etc. The virtual keyboard displays as follows.

A B C D E F G H I J K L M N O P QRSTUVWXYZ a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 # − _ , “ + = *

◄ ► Backspace Delete Cancel OK

! @

www.ernitec.com

Page 11

OSD Setup Manual

Move the cursor by pressing Direction keys and press ENTER to select characters.

Alternatively, press channel keys 1~9 to directly enter number 1~9, press channel

key 10 to directly enter number 0, or press “CALL” key to directly enter a period

mark “.”. The hot keys are for speeding up inputs of IP addresses or etc.

Select <◄> / <►> and press ENTER to move the cursor to left / right in the title

entry field.

Select <Backspace> and press ENTER, or press DOME.

Select <Delete> and press ENTER..

Select <OK> and press ENTER to save the settings and exit, otherwise press ESC

or select <Cancel> and press ENTER to exit without saving changes

www.ernitec.com

Page 12

OSD Setup Manual

System Setup

Select <System Setup> from the Main Menu and press ENTER to enter the System Setup

menu. The items in the System Setup menu are described in the following sections.

System Setup System/Version Info Language Date/Time Unit Name User Management Network Setup RS485 Setup Audio Output/Key Beep IP Camera Support

English

<System/Version Info>

The Version menu allows users to view system information such as hardware and software

DVR

version. From the System Setup menu, select <System/Version Info> and press ENTER.

The following menu is displayed. The first five items are “read only”, thus CANNOT be

changed. The items in this menu are described in the following subsections.

System/Version Info

Model Name Video System Hardware Software MAC Address 1 Software Upgrade via Local Device

****-****-****-****

**:**:**:**:**:**

****

NTSC

**-**-**

 Model Name

This item shows the model name of the unit.

 Video System

This item shows the current video system of the unit.

 Hardware

This item shows the hardware version of the unit.

 Software

This item shows the software version installed on the unit.

www.ernitec.com

Page 13

OSD Setup Manual

 MAC Address 1

This item identifies the first Media Access Control (MAC) address of the unit.

 Software Upgrade via Local Device

This item is used for updating software of the ERIS H.264 DVR via local device.

The menu is displayed as follows.

Software Upgrade via Local Device Upgrade Version xxxx-xxxx-xxxx-xxxx

Connect an USB storage device containing upgrade software to the unit; the

available upgrade files will be listed in the menu. To update the system, select a file

and use UP / DOWN keys to choose <Yes>. Press ENTER to confirm the selection

and start the upgrade process. The ERIS H.264 DVR will download the software,

update the system files, and reboot automatically.

Select

The upgrade may take several minutes to save the changes in the memory of the

system. After the unit is rebooted, please check the software version again.

NOTE: Power interruption is NOT allowed during the software update.

Ensure that no power interruption can occur until the unit is completely

rebooted.

NOTE: Do not remove the external USB ThumbDrive® / DVD+RW before

the unit has completely shutdown (hard drive and fan are off). Removing

the external USB ThumbDrive® / DVD+RW before shutdown can cause the

system to update improperly.

<Language>

The Language item allows users to select the language for the OSD menu and screen

messages. Language selection takes effect immediately when the selection is made. Press

UP / DOWN to select from listed languages and press ENTER to confirm.

www.ernitec.com

Page 14

OSD Setup Manual

<Date / Time>

Users can set the current date, time and other OSD parameters in this menu. The

Administrator’s privileges are required for entering the submenu. In System Setup menu,

select <Date/Time> and press ENTER. The Date/Time menu displays as follows.

Date/Time Date Time Date/Time Display Date Display Mode Time Display Mode Date/Time Order Daylight Saving Time Setup

NOTE: The reset of date / time setting only applies to new video. The date and time

of previously recorded video will not be changed.

NOTE: To avoid database corruption, formatting the database is recommended after

2005/02/21

PM10:39:26

1 Row Y/M/D 12 HR

Date First

changing Date/Time setting.

 Date / Time

Select <Date> or <Time> and press ENTER to adjust the settings. LEFT / RIGHT

keys are used to move the cursor to previous or next field, ENTER is for selecting,

and UP / DOWN are used to change the value in the selected field.

 Date/Time Display

The date/time display can be set to be shown in 1 row, 2 rows, or not shown. Use

the UP / DOWN keys to change the setting.

 Date Display Mode

This menu allows users to set the display type of the date. Three options are

provided: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y” represents “Year”, “M” represents

“Month” and “D” represents “Day”. Use UP / DOWN keys to change the setting.

 Time Display Mode

Users can set the time format to <12 hour> or <24 hour>. Use the UP / DOWN

keys to change the format.

 Date/Time Order

This item is used to set the order of Date/Time display to <Date First> or <Time

First>. Select this item and press UP / DOWN keys to change the setting.

www.ernitec.com

Page 15

OSD Setup Manual

 Daylight Saving Time Setup

This function is for people who live in certain regions to observe Daylight Saving

Time. The menu displays as follows:

Daylight Saving Time Setup Daylight Saving Time DST Start DST End DST Bias

- Daylight Saving Time

Select <ON> to enable, or <OFF> to disable the function. If the function

is disabled, the DST Start / End time and DST Bias will be grayed out and

cannot be accessed. If this function is enabled, the date/time information

will be shown on the screen with a DST icon when playing back recorded

video or searching video in the event list. “S” indicates summer time and

“W” indicates winter time.

Apr. 1

Oct. Last Sun, 02:00

Sun, 02:00

OFF

60 Min

- DST Start / End

These items are used to set duration of daylight saving time. Use LEFT /

RIGHT to move the cursor to the previous or next field, UP / DOWN to

change the settings.

- DST Bias

This item allows users to set the amount of time to move forward from the

standard time for daylight saving time. Available options are <30>, <60>,

<90> and <120> minutes.

www.ernitec.com

Page 16

OSD Setup Manual

<Unit Name>

Users are allowed to assign a unit name, up to 11 characters, to the ERIS H.264 DVR.

Follow the steps below to edit the unit name.

• Select <Unit Name> from System Setup menu and press ENTER. A virtual

keyboard displays as below.

Unit Name

A B C D E F G H I J K L M N O P QRSTUVWXYZ a b c d E f g h i j k l m n o p q R s t u v w x y z 0 1 2 3 4 5 6 7 8 9 # − _ , “ + = *

◄ ► Backspace Delete Cancel OK

! @

• Use Direction keys to move the cursor to the wanted character.

• Press ENTER to add the character to the entry field (up to 11 characters).

• When the unit name is entered, move the cursor to <OK> and press ENTER to

save the settings and exit.

<User Management>

The DVR provides the option to create up to seven sets of usernames and passwords with

customized authority, excluding the preset “admin” account. The menu is as the following.

User Management

Password Protection Account Setup Authority Setup Load Default Setting

 Password Protection

Select <ON> to request for username and password for accessing functions listed

in Authority Setup menu, or select <OFF> to allow free access.

 Account Setup

Setup customized username, password, and authority level in this menu. Press

Direction keys and ENTER to select items. The username(ID) is case sensitive.

The authority level ranks from level 1~8, and level 8 has highest authority.

Alternatively, select <Disable> to stop using the account.

www.ernitec.com

Page 17

OSD Setup Manual

Account

admin

user1 user2 user3 user4 user5 user6 user7

NOTE: The username and authority level of the preset “admin” account

cannot be changed.

 Authority Setup

Setup permitted authority level for accessing the functions listed in this menu. The

user

Account Setup

ID Edit Edit Edit Edit Edit Edit Edit Edit Edit

PWD

Edit Edit Edit Edit Edit Edit Edit Edit Edit

Authority

Level 8 Level 4 Level 4 Level 4 Level 4 Level 4 Level 4 Level 4 Level 4

functions include: Playback/Search, Dome Control, Call Control, Export Data,

Menu Access, System Setup, Monitor Setup, Camera Setup, Record Setup,

Sequence Setup, Event Setup, Database Setup, Configuration, Text Setup, and

Shutdown. Press Direction keys and ENTER to select from items. The authority

level ranks from level 1~8, and level 8 has highest authority. Alternatively, select

<Disable> to allow free access.

Authority Setup

FIRST PAGE Item Playback/Search Dome Control Call Control Export Data Menu Access

System Setup Monitor Setup Camera Setup Record Setup

Authority

Level 4 Level 4 Level 4 Level 4 Level 4 Level 4 Level 4 Level 4 Level 4

NOTE: The “Menu Access” cannot be set to <Disable>.

When the account does not have authority to access certain functions, an error

message will be displayed on the screen.

 Load Default Setting

This item is for restoring the default settings. Select <Yes> to load default setting or

select <No> to exit.

www.ernitec.com

Page 18

OSD Setup Manual

<Network Setup>

The Network Setup menu allows the administrator to configure the network by specifying

the network related settings, such as IP address and Netmask, etc. Check with the network

administrator and/or network service provider for more specific information. The menu is as

the following. Items in this menu are described in the following sections.

Network Setup

LAN Select LAN Setup Trigger Port Email Address SMTP Setup DDNS Setup

 LAN Select

This item allows you to select your service type among <LAN>, <PPPoE>, and

<None>. If you are using a local area network communication, please select

<LAN>. If you are using a broadband medium, such as DSL Line or cable modem,

LAN

please select <PPPoE>.

PPPoE stands for Point-to-Point Protocol over Ethernet. It is a specification for

connecting the users on an Ethernet to the Internet through a common broadband

medium.

If <None> is selected, then there is no need to set further LAN or PPPoE settings.

Therefore, the second item <LAN Setup>will be inaccessible.

 LAN Setup

The network related settings in the LAN Setup menu should be associated with the

network service type. Select <LAN Setup> in Network Setup menu and press

ENTER to set the parameters. The menu displays as follows.

DHCP IP Netmask Gateway DNS PPPoE Account PPPoE Password PPPoE Max Idle Connect At Booting Network Restart

LAN Setup

OFF

192.168.1.150

255.255.255.0

192.168.1.1

0.0.0.0

35min

Yes

www.ernitec.com

Page 19

OSD Setup Manual

- DHCP

This item allows users to obtain a dynamic IP address from DHCP

(Dynamic Host Configuration Protocol) server when the unit boots up.

When using DHCP, the settings are dynamic and will change every time

the unit power on or off, depending on the network's setup.

If the item is enabled (ON), a dynamic IP will be assigned to ERIS H.264

DVR. In this case, users do not need to set a static IP and the Ethernet

settings, including IP address, Netmask, Gateway, and DNS settings will

be read-only. The default setting is <ON>.

If the unit is using a permanent address, disable DHCP (OFF) to

manually set IP Address, Netmask, Gateway, and DNS. See the network

system administrators or IT personnel for appropriate values.

- IP

This item is used to configure the IP (Internet Protocol) address of the

unit. The IP address is the identifier for the unit on a TCP/IP LAN. Please

note that to set a static IP address, DHCP must be set to <OFF>.

- Netmask

A netmask is a 32-bit mask used to divide an IP address into subnets and

specify the networks available hosts. Its value is defined by the network

administrator. It takes the form as ***.***.***.***, for example,

255.255.255.255.

This item allows users to enter the value of the Netmask for the unit.

Please note that to configure this item, DHCP must be set to <OFF>.

- Gateway

Gateway is a node on a network that serves as an entrance to another

network. Users are allowed to specify the IP address of the gateway or

router associated with this unit. To configure this item, DHCP must be set

to <OFF>.

www.ernitec.com