The options in system mainly contain the switch of some color and sound
sys,
set “yes” or “no” with the VOL+ key. Option Naming can be used to switch
the
search
Reset in the
shows
naming of saving programs in APS, Option APS can switch the function of
compositor
and
FUNCTION
the current
option state, <yes> means”on”and <no> means”off”.
the
in
MENU. The word in the < > at the right side of options
The default state is <yes>.
6. IC Option:
searching
state.
Powerup
can switch the Factory
ATS
Option HDMI<Yes >
OptionHDCP<Yes>
Option DVI and HDMI< Yes >
20
--
Page 10
Service Adjustments
When Option HDMI displays “yes”,HDMI is open and DVI is off ,when it displays “no”, the action is opposite. Option HDCP means to turn HDCP on/off(Highbandwidth Digital-Content Protection). The third item shows toturn on/off
face of Hi-Fi digital.
inter
7. Teletext Option:
\
Teletext On/Off< Yes >
Teletext Language< UK >
The first item shows the on/off state of Teletext function, the second item,
the choice of language, available languages for selecting: UK, East Eu, Greece,
Cyrilli,
Arabic.
8. AV Option:
Option SCART1<Yes >
OptionSCART2<Yes >
OptionAV< Yes >
OptionSV< Yes >
OptionDVD< Off >
OptionSCARTOutput< TV >
The items 1~4 canbe set to ““yes” or
All of the default states is “yes”
”
o which show the switches of
n
SCART1,
the
S-VIDEO. There are three states can be set in Option DVD, they
SCART2,
are
SCART
signal.
9. Language Option1&Language Option2
AV,
Off, DVD and DTV, they show off, turn on DVD and turn on DTV. Option
Output can be set to AV or TV, they show SCART output signal or AV
The default setting is the same as the state above.
:
The two options are menu language setting, each of them has “yes” and “no”
state. You can set Menu language in FUNCTION MENU when the language is
“yes”.English is only set in the default setting, others are off.
to
set
10. Hotel Option:
Search Menu Display< Y es >
Blue Screen< Y es >
Option Reset< Yes >
Fixed Volume< No >
Max Volume< +100 >
Local Key Operation< Yes >
Power On Program< REM >
Power On Source< TV >
Power On Status< REM >
Logo Edit
APS As Philips<Yes >
-1-
2
Page 11
Service Adjustments
Search Menu Display shows turn on/off the search menu. The volume
the prior setting and can’t be changed by pressing VOL+ or VOL- when the
at
Fixed
in
1~200 in under
fountain, TV and AV.
Volume is set to “yes”.Local Key Operation shows whether the key-board is
effect
Power On Program can be set to REM,+1~+200, corresponds to channel
memory state. Power On Source is the setting of boot-strap input
There are REM, On and Off three settings under Power On
Status, they show:
Press VOL+, enter Logo Edit, two options:
Logo Edit__________
LogoFontSize< + 2 >
LogoOnOff< Yes >
The first item can edit the menu in turning on te set ,
keys
ten
+4
under
letters
available.
LogoFontSize menu to input twenty-six letters and Space, you can edit
at
most.
Use LogoFontSize to set the size of Logo, There are+1, +2, +3,
17.After setting the parameters,press MENU to save the setting and exity from the
factory
submenu.
Boffset< +128 >
--
23
Page 13
Control Location
1. Power ON / OFF
2. Power Indicator
3. Remote Sensor
4. AV/TV
5. MENU
6. CH.-Button
7. CH. + Button
8. VOL.-Button
9. VOL.+ Button
10. Speakers
11. HDMI
12. VGA
13. PC AUDIO IN
75 ANT
14.
15. AV OUT VIDEO
16. AV OUT AUDIO L
17. AV OUT AUDIO R
18. AV IN 1 VIDEO
19. AV IN 1 AUDIO L
20. AV IN 1 AUDIO R
21. AUDIO
22. AUDIO IN L
23. AUDIO IN R
24. S-VIDEO
2
1
5
4
6
3
1010
78
9
16
15
VIDEO
UT
AUDIO
Pr/Cr
LR
HDMI
1111
VGA
12
Pb/Cb
Y
PCAUDIO IN
13
14
75 ANT
-2 -
4
O
AV
VIDEO
N1
I
AV
18
19
21
17
VIDEO
AUDIO
L
R
S-VIDEO
AUDIO
L
R
24
20
L
2
22
N
I
AV
R
23
Page 14
Operation Instructions
Installation
Locate the receiver in the room where direct light does not
strike the screen.
Total darkness or a reflection on the picture screen can cause
eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the receiver and the wall to
permit ventilation.
Avoid excessively warm locations to prevent possible damage
to the cabinet or premature component failure.
This TV operates on AC supply directly, connect the AC plug to
the socket at the back of the TV. Insert the mains plug in the
socket having a mains voltage of 110-260V AC.
Do not install the receiver in a location near heat sources such
as radiator, air ducts, direct sunlight, or in a place somewhere
like close compartment and close area.
Do not cover the ventilation openings when using the set.
Features
Up to 200 programme memory.
TwinScart connections.
Teletext (Fastext,500pages)
Headphone socket.
A.P.S(Automatic programming system)
Programme swapping.
Sleep timer.
4:3,16:9,Zoom1,Zoom2,panorama and Full
screen picture modes.
When no TV signal is dectected,after 5
minutes the TV switches itself automatically
to stand-bymode.
CYS: PAL/SECAM
SYS: BG / DK / I/L / L
HDMI Input (support up to 1080i)
PC Input (support up to 1080i)
PIP
NICAM Stereo
Panel Features
High resolution (1336x768),32 TFT LCD
display.
Brightness: 500cd/m
High-speed response time <30 msec.
8-bit color depth,display 16.7M colors.
High contrast ratio (1600:1 Typital)
Wide viewing angle(typical):178 (horizontal)
and 178 (vertical).
0
2
0
--
2
5
Page 15
Operation Instructions
110-240V
AC,50Hz
--
6
2
Page 16
Operation Instructions
110-240V AC, 50Hz only.
TV Aerial input socket
12
Precautions when using batteries
Do not use old and new batteries together.
Do not use different types of batteries (for
example, Manganese and Alkaline batteries)
together.
Note that there are chargeable and nonchargeable batteries. Do not attempt to charge
non-chargeable batteries.
Remove the batteries from the remote control
unit if you do not intend to use the unit for a long
time.
NOTE:
Do not drop the remote control unit.
Do not subject the remote control unit to
physical shocks.
Keep the remote control unit dry. Wetting it may
cause the unit to malfunction.
Replace the batteries with new ones when
operation of the unit deteriorates.
Following the +/- marking in the battery
compartment.
Switching the TV ON/OFF
Toswitch the TVon
Connect the main cable to the power input socket,
Press on/off switch at the rear of the TV. The TV switches itself and the
LED indicator on the front of the
TV will change from red to green colour.
Toswitch the TVoff
Press thebutton on the remote control or TV, the
""
TV will switch to stand-by mode and the GREEN power indicator will
change to RED.
Operating the TV
2
--
7
Page 17
Operation Instructions
MENU BUTTON
1.Press menu button to display menu ,and press VOL.+ or
VOL.- to selectsubmenu.
""
PICTURE Menu
Menubutton hastwofunctions: Firstisopening orslosing
the menu, and the second is colsing the current menu and then
openingthe previousmenu.
Themenu will time out automatically after several secondsifitis left
onthe screen.
Press the MENU key on the remote control unit to cancel the
menufunction.
2.After entering an item, you can select the desired adjusting item
by the VOL.+ / VOL.- buttons, and adjust It by the PROG.
"""""
+ / PROG.- buttons.
"""
SOUND Menu
""
TUNER Menu
""
FUNCTION Menu
PIP Menu
Picture menu
Sound menu
Enter Sound menu,you can select Volume,Balance,
Surround,MSS and Equalizer itemsby pressing
""""
PRGO.+- Buttons.
/ PROG.
Volume
Press the VOL.+ / VOL.- button to adjust
the sound volume .
""""
Balance
Choose the VOL.+ / VOL.- button to adjust
to the left to right sound channel volume.
""""
Surround
Press the key to select surround mode,on/off.
MSS
Press the button to get bass or treble.
The choice are on and off.
Enter Picture menu,you can select Brightness,Contrast,
Colour,Sharpness,ColourTempand N.R. items by
pressing PRGO.+ or PROG.- buttons.""""
Brightness
Using
darken the picture.
""""
the VOL.+ / VOL.- button lighten/
Contrast
Press the VOL.+ / VOL.- key to enhance/
reduce the contrast of the picture.
""""
Colour
Press the VOL.+ / VOL.- button to increase/
decrease the colour saturation.
""""
Sharpness
Utilize
the button to sharpen or soften the picture.
Colour Temp
Make use of the button to select a suitable colour
temperature to display.
The choices are Normal, Cooler, Cool, Warm, Warmer.
N.R.
Press the button to adjust
are Off, Low, Middle, High.
noise reduction , The options
Equalizer
Atone control system designed to compensate
for frequency distortion in audio systems.
Enter Equalizer ,you can select 120HZ,500HZ,
1.5KHZ,5KHZ and 10KHZ items by pressing
PROG.+
""""
/
PROG.-
Buttons and change the
correspondingvalue of volume by pressing
VOL.+-
""""
/
VOL.
Buttons.
Tuner menu
Followed by the Tuner menu, Program,Colour
System,Sound System,Auto Tune,Tuning,Fine
Tune,Prog.Sortandare the items,which can be
selected by pressing PROG.+ / PROG.-
buttons.
Skip
""""
Program
Using the VOL.+ / VOL.- buttonschange
program you expect.
""""
Colour System
Press the button to select a new colour standard
value in TV.
The Choices are AUTO,NTSC,SECAM,PAL.
2
--
8
Page 18
Operation Instructions
Sound System
Press the button to select a new sound standard
value in TV.
The options are I,M,L,L ,DK,BG.
NOTE:This TV factory set to "I" UK sound. If changed to
another setting whilst receiving a UK TV station this will
result in loss of sound. Change back to "I" to restore the
sound.
APS AUTO Tune
1. Press MENU button.
2. Press VOL+/- button and highlight the TUNING
icon.
3. Press PROG - button and highlightAUTOTUNE
(APS).
4. Press VOL+ button to start the automatic tuning
process.
5.After a few minutes the tuning will end and the
first station stored will show on the TV screen.
6. Change channels by pressing the
buttons.
Notice: Only after finishing APS auto tune, channels
will be sorted. If you stop the process during the auto
tune period, channels will be searched and stored,
however,
correct channel order.
the channel will not be sorted into their
,
PROG+/PROG-
Function menu
In the Function Menu, OSD languages andAPS
related options are displayed on the screen.
Menu Language
The Language is English only.
Country
Select your location country: UK / Greece / Hungary/
Italy / Norway / Netherlands / portugal / Poland /
Sweden / Slovenia / Slovakia / Turkey /Austria /
Belgium / Switzerland / Czech / Germany / Denmark/
Spain / France / Finland.
Notice: Different countries will effect the sort process
inAPSAUTOTUNE.
Factory Reset
Press VOL+ key to delete all
""previously stored
program information.
Manual Tuning
1. Press Menu button.
2. Press Vol+or - button repeatedly until the TUNER
icon is highlighted.
3. Press the PROG- button and highlight Program and
change the Channel number showing to the number
that you wish to store or change the TV station showing
by pressing Vol+/-button.
4. Press Prog - button repeatedly and highlight
MANUALTUNE.
5. Start the manual tuning process by pressing the
VOL+ or VOL- button.
6. When the desired TV station is showing press the
MENU button to return theTV to its normal operation.
TheTV station will be automatically stored into the
channel number that was previously inputted.
7.To store further channel repeat above steps but this
time change the channel number in step 3 to your next
desired stored channel number 2,3, etc.
Fine Tune
Press VOL.+ / VOL.- buttonto adjust the
""""
little change of frequency.
PIP menu
The last Menu is PIP menu,you can select Mode,
PIPH-POS,PIP V-POS,Brightness,Contrast,Sub
Source and Swap items by pressing PRGO+/Buttons.
Mode
The choices are PIPand Off. Only bychoosing PIP,
you can enter PIPH-POS,PIP V-POS,Brightness,
Contrast,Sub Source and Swap items.
PIPH-POS
Press the button to change horizontal position.
PIPV-POS
Press the button to change vertical positon.
Note PIP (Picture In Picture) is used to display an
external source such as PC/DVD/Skybox/Freeview
box at same time as displaying theTV channel that
you are watching.
29
--
Page 19
Operation Instructions
Brightness
Press the VOL.+ / VOL.- button to lighten/
darken the picture in PIP state.
""""
Contrast
Press the VOL.+ / VOL.- buttonto increase/
decrease the contrast of the picture in PIP state.
""""
Sub Source
The choices are VGA,HDMI,YPbPr.
Swap
Press VOL.+ buttonto swap the picture
""
between PIP and TV state.
PC MODE
Sound menu
Adjust menu
""
Using PROG.+ /PROG.- to select different
items,press VOL.+ / VOL.- to set different
values in Frequency,phase,H-positionand
V-position.
When you selectAuto adjust pressing VOL.+ to
adjust different pitcture modes automatically.
""""
""
Function menu
15 Pin Mini D-Sub Connector
MENU in PC Mode
Enter menu by pressing the MENU button on
the remote control.
Picture menu
PICTURE
""
PIP menu
In PC modes, the sub source options are TV,AV,
SCART1,SCART2,S-VIDEO,which are defferent
fromTV mode.
PC Input typical display modes.
The following table is an illustration of some of the
typical video display modes.
The menu of YPb Pr mode is exactly same as the
menu of HDMI mode.
YPbPr Input typical display modes.
The following table is an illustration of some of the
typical video display modes.
Press CANCEL button tothe
TEXT. But the page number is still
displayed on the left top of the screen.
NOTICE: However, Teletext is playing
all the same on the background at the
time.
Press CANCEL button again to
resume the TEXT.
clear
ToTEXTFreeze
Press HOLD button toText
page.This means the page will not
change and refresh.
Press the button again to release the
hold state.
hold a
SUB.PAGE
500
SUB.PAGE
2
-3 -
TEXT
Page 22
Operation Instructions
Remote Control Buttons
= STANDBY
1
= MUTE
2
0-9 = DIGIT
3
AV/TV= AV/TV
4
MENU = MENU
5
PROG.+ = PROGRAM UP
6
PROG.- = PROGRAM DOWN
7
VOL.+ = VOLUME UP
8
VOL.- = VOLUME DOWN
9
2
1
3
4
24
S.S. = SOUND SYSTEM BUTTON
10
Q.VIEW = QUICK VIEW
11
P.P. = PICTURE MODE
12
DISPLAY=SCREEN DISPLAY
13
I/II
14
15
16
17
18
19
20
22
= SOUND MODE SELECTION
SLEEP= SLEEP BUTTON
REVEAL
CANCEL
INDEX
MIX
SUB.PAGE
SIZE
21
HOLD
9
11
10
13
14
16
21
22
6
5
8
7
12
15
18
17
19
23
20
TEXT
23
Hot key (only in teletext mode)
24
The following page will show the remote control functions.
3
-3 -
Page 23
Operation Instructions
Remote control functions
1.POWER (STANDBY) BUTTON ()
Pressthis buttontoturn theTV on/standby.
2.MUTE BUTTON ()
Press once to mute the sound, press again to return to preset
soundlevel.
In CATV system if you want to watch the channel from 100 to 125,
suchas channel123,please press
-/-- first,andpress 2 and 3 inturn.""
4.AV/TV BUTTON
Press this button to display external video signal such as
/SCART2/AV
Using PROG. + / PROG.- Buttonselect item and press
VOL.+ / VOL.- buttontoenter selecteditem.
""""
/S-VIDEO/YPbPr/VGA/HDMI/TV.
""" "
SCART1
13.DISPLAY BUTTON
Press this button to display the program information on the
screen.(e.g. Channel number for TV input,sound mode,colour
system).
14.STEREO/BILINGUAL SOUND(
)BUTTON (OPTION)
When stereo program is received,press this button to select
STEREO or MONO.When bilingual program is
received,press this button to select NICAM DUAL-1,NICAM
DUAL-2,NICAM MONO.
15.SLEEP BUTTON
Press this button to set the sleep timer. When the preset
length of time has passed, the TV set
Enters standby mode. The sleep timer values are follows:
off,15,30,60,90,120.
16.REVEAL BUTTON
Press this button to reveal the hidden information for so
me Teletext pages press again to hide the information.
17.CANCEL BUTTON
Press this button to appear the TV signal on the
background.
5.MENU BUTTON (MENU).
Press this buttonto enter themenu mode forvarious
Optional adjustable settings.To lookfor more information,
Please turn topage 10.
6-7. PROG.+ / PROG.- BUTTONS
""""
Press PROG.+ or PROG.- button to select the program
forwards or backwards.
8-9.VOL.+ / VOL.- BUTTONS
Press VOL.+ / VOL.- Buttons to adjust sound level. Or adjust the
""""
volume of each item in the menu status.
10.SOUND SYSTEM BUTTON (S.S.)
Set the correct sound system in TV mode.Such as DK,BG,I,M,L,L
bypressing thiskey.
The button is used as closing /opening the teletext
background..
20.SUB.PAGE BUTTON
Subcode mode,gives,the possibility to select certain
subcode pages of a teletext page.
21.SIZE BUTTON
In Teletext mode press this button to change the
Teletext size.If not in teletext mode,press size button
change image size .
In other modes,press this button you can select different
image sizes: 4:3 / Zoom 1 / Zoom 2 / Panorama / Full
Screen.
22.HOLD BUTTON
Press this button to hold the Teletext page no display to
prevent the page from changing.Press again to release
the hold state.
23.TEXT BUTTON
Thisbutton isusedfor enteringtheteletext MENU.
12.PERSONAL PRESETS BUTTON (P.P.)
You can set the picture mode in User, Standard, Soft,Bright mode
by pressing this button.