Ericsson Wi Fi 40015001 User Manual

BelAir20E-11
BelAir20E-11
Conformity and Regulatory Statements
Document Date: November 15, 2012 Document Number: BDTD02202-A03 Document Status: Released
Security Status: Confidential
© Copyright 2012 by Ericsson AB. All rights reserved.
Ericsson Inc.
Page 1 of 12
BelAir20E-11 Conformity and Regulatory Statements Contents
Contents
Conformity and Regulatory Statements. . . . . . . . . . . . . . . . . . . . . 3
Regulatory Information and Disclaimers . . . . . . . . . . . . . . . . . . . . . . . .3
Manufacturer’s US Federal Communication Commission Conformity
Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
FCC Interference Statement . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Manufacturer’s Industry Canada Conformity Statement . . . . . . . . . . . .5
Manufacturer’s European Community Conformity Statement . . . . . . .6
Declaration of Conformity for RF Exposure . . . . . . . . . . . . . . . . . . . . .9
Product Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
November 15, 2012 Confidential Page 2 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements
Conformity and Regulatory Statements
This section provides declarations of conformity and regulatory information for the BelAir20E-11.
This section contains the following sections:
“Regulatory Information and Disclaimers” on page 3
“Manufacturer’s US Federal Communication Commission Conformity
Statement” on page 4
“Manufacturer’s Industry Canada Conformity Statement” on page 5
“Manufacturer’s European Community Conformity Statement” on page 6
“Declaration of Conformity for RF Exposure” on page 9
“Product Disposal” on page 9

Regulatory Information and Disclaimers

Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The manufacturer is not responsible for any interference to radio or television equipment caused by unauthorized modification of this device, or attachment of any antennas or equipment other than those specified by the manufacturer. The manufacturer or its authorized resellers or distributors will assume no liability for any damage arising from failure to comply with these guidelines, or failure to comply with local, regional or national safety, electrical or building codes, or government regulations.
This product is manufactured in China with originating and non-originating product.
Ce produit est fabriqué en Chine avec des matières originaires et non originaires du produit.
November 15, 2012 Confidential Page 3 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements

Manufacturer’s US Federal Communication Commission Conformity Statement

FCC Interference Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
November 15, 2012 Confidential Page 4 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements
IMPORTANT NOTE: FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits for an uncontrolled environment. This equipment should be installed and operated at a minimum distance of 7.9 inches (20 cm) between the radiator and a human body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: The country code selection is for non-US model only and is not
available to all US models. Per FFC regulations, all Wi-Fi products marketed in the US must be fixed to US operation channels only.
Manufacturer’s Industry Canada Conformity
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Statement
IMPORTANT NOTE: Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and a human body.
Caution:
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.
High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
NOTE IMPORTANTE: Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
November 15, 2012 Confidential Page 5 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et d’un corps humain.
Avertissement:
Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Manufacturer’s European
Table 1: European Community Conformity Statement
Community Conformity Statement
Language Statement
English This equipment is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Deutsch Dieses Gerät entspricht den grundlegenden Anforderungen
und den weiteren entsprecheneden Vorgaben der Richtlinie 1999/5/EU.
Dansk Dette udstyr er i overensstemmelse med de væsentlige krav
og andre relevante bestemmelser i Directiv 1999/5/EF.
Español Este equipo cumple con los requisitos esenciales asi como
con otras disposiciones de la Directiva 1999/5/EC.
Français Cet appareil est conforme aux exigences essentielles et aux
autres dispositions pertinentes de la Directive 1999/5/EC.
Íslenska Þessi búnaður samrýmist lögboðnum kröfum og öðrum
ákvæðum tilskipunar 1999/5/ESB.
Italiano Questo apparato conforme ai requisiti essenziali ed agli altri
principi sanciti dalla Direttiva 1999/5/EC.
Nederlands Deze apparatuur voldoet aan de belangrijkste eisen en andere
voorzieningen van richtlijn 1999/5/EC.
November 15, 2012 Confidential Page 6 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements
Table 1: European Community Conformity Statement (Continued)
Language Statement
Norsk Dette utstyret er i samsvar med de grunnleggende krav og
andre relevante bestemmelser i EU-directiv 1999/5/EC.
Português Este equipamento satisfaz os requisitos essenciais e outras
provisões da Directiva 1999/5/EC.
Suomalainen Tämä laite täyttää direktiivin 1999/5/EY oleelliset vaatimukset
ja on siinä asetettujen muidenkin ehtojen mukainen.
Svenska Denna utrustning är i överensstämmelse med de väsentliga
kraven och andra relevanta bestämmelser i Direktiv 1999/5/ EC.
The Declaration of Conformity related to this product can be found by contacting Ericsson.
The BelAir20E-11 complies with the following EU Radio standards:
EN 300 328 V1.4.1 (2003-04) and EN300 328-2 V1.2.1 (2001-12) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.
EN 300 440-2 V1.1.1 (2001-09) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive.
EN 300 440-2 V1.1.2 (2004-07) Electromagnetic Compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive.
EN 301 893 V1.4.1 (2007-07) Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
EN 300 328 V1.6.1 (2004-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data
November 15, 2012 Confidential Page 7 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements
transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
UK Interface Requirement 2005 UK Radio Interface Requirement for
.
Wideband Transmission Systems operating in the 2.4 GHz ISM Band and Using Wide Band Modulation Techniques
UK Interface Requirement 2006 Wireless Access Systems (WAS) including
(November 2006).
RLANs operating in the 5150-5725 MHz band (Version 3.0)
98/34/EC Notification number: 2006/421/UK Published 14 November 2006
UK Interface Requirement 2007 Fixed Broadband Services operating in the 5725 -5850 MHz band (Version 3.0)
98/34/EC Notification Number: 2006/422/UK Published 30 May 2007
The BelAir20E-11 complies with the following EU EMC standards:
EN 301 489-17 V1.2.1 (2002-08) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 17: Specific Conditions for 2.4 GHz Wideband Transmission Systems and 5 GHz High Performance RLAN Equipment
The BelAir20E-11 complies with the following EU Safety standards:
EN 60825-2:2000 EN 60950:2000
IEC 60950:2005 Second Edition
The following CE mark is affixed to the BelAir20E-11:
Note: This equipment is intended to be used in all EU and EFTA countries.
Outdoor use may be restricted to certain frequencies and/or may require a license for operation – for example in France the frequencies 2454-2483.5 MHz are restricted to 10 mW effective isotropic radiated power (EIRP) in outdoor environments, so channels 8-13 require reduced power. For more details, contact Ericsson.
November 15, 2012 Confidential Page 8 of 12
Document Number BDTD02202-A03 Released
– Safety of Optical Fibre Communication Systems
– Safety of Information Technology Equipment
and/or
EN 60950-1:2006
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements

Declaration of Conformity for RF Exposure

This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C, Health Canada Safety Code 6 and EN 62311:2008, and found to be compliant to the requirements set forth in CFR 47 Sections 2.1091, 2.1093, and
15.247 (b) (4) addressing RF exposure from radio frequency devices. This
Wireless LAN radio device also conforms to EU Health and Safety Directive 2004/40/EC as per EN 50385.
This device complies with FCC RF radiation exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the FCC radio frequency exposure limits. However, this device should still be installed and used in such a manner that the potential for human contact during normal operation is minimized.
Warning: In order to comply with RF exposure limits established in the ANSI C95.1 standard, this equipment should be installed and operated at a minimum distance of 7.9 inches (20 cm) between the radiator and a human body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

Product Disposal

Mise au rebut du produit
Produktentsorgung Ericsson erfüllt die Anforderungen der Richtlinie 2002/96/EG des Europäischen
Ericsson adheres to directive 2002/96/EC of the European Parliament and the council of 27 January 2003 on Waste Electrical and Electronic Equipment (WEEE).
To dispose of equipment, including batteries, contact Ericsson customer service to get a Return Material Authorization (RMA) number and shipping instructions.
Ericsson se conforme à la directive 2002/96/EC du Parlement européen et du Conseil de l’Europe du 27 janvier 2003 relative à la destruction des déchets d’équipements électriques et électroniques (DEEE).
Si vous souhaitez vous débarrasser de l’équipement, y compris des piles, veuillez communiquer avec le service à la clientèle de Ericsson, afin d’obtenir un numéro d’autorisation de retour du matériel et des instructions sur les modalités d’expédition.
Parlaments und des Rates vom 27. Januar über Elektro- und Elektronik-Altgeräte (Waste Electrical and Electronic Equipment = WEEE).
November 15, 2012 Confidential Page 9 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements
Für die Entsorgung von Geräten, einschließlich Batterien, wenden Sie sich bitte an den Kundendienst von Ericsson, um eine RMA-Nummer (Rücksendenummer) und die Versandanweisungen zu erhalten.
Verwijdering van het product
Tuotteen hävittäminen Ericsson noudattaa sähkö- ja elektroniikkalaiteromusta 27 päivänä tammikuuta
Smaltimento del prodotto
Ericsson volgt Richtlijn 2002/96/EG van het Europese Parlement en de Raad van 27 januari 2003 betreffende afgedankte elektrische en elektronische apparatuur (AEEA).
Voor het verwijderen van apparatuur, met inbegrip van batterijen, neemt u contact op met Ericsson klantenservice voor een retournummer (RMA) en verzendinstructies.
2003 annettua Euroopan parlamentin ja neuvoston direktiiviä 2002/96/EY.
Palauttaaksesi välineet, mukaan luettuina akut, ota yhteys Ericsson – asiakaspalveluun, niin saat RMA (Return Material Authorization) –numeron ja lähetysohjeet.
Ericsson aderisce alla direttiva 2002/96/CE del parlamento Europeo e del Consiglio d’Europa del 27 gennaio 2003, sullo smaltimento degli apparecchi elettrici ed elettronici (WEEE).
Per lo smaltimento di tali apparecchi, comprese le batterie, contattare l’assistenza clienti di Ericsson per ottenere un numero di autorizzazione alla restituzione del materiale da smaltire (Return Material Authorization - RMA) e le istruzioni per la spedizione.
Produktbortskaffelse Ericsson overholder direktivet 2002/96/EC fra Europa-Parlamentet og -Rådet
dateret den 27. januar 2003 om Waste Electrical and Electronic Equipment (WEEE) (Affald af elektrisk og elektronisk udstyr).
For at bortskaffe udstyr, samt batterier, kontakt kundeservicen hos Ericsson for at få et Return Material Authorization (RMA)-nummer (returneringstilladelsesnummer) og forsendelsesinstruktioner.
Eliminação do produto A Ericsson cumpre a Directiva 2002/96/CE do Parlamento Europeu e do
Conselho, de 27 de Janeiro de 2003, relativa aos Resíduos de Equipamentos Eléctricos e Electrónicos (REEE).
Para proceder à eliminação do equipamento, incluindo as baterias, é favor contactar a assistência ao cliente da Ericsson para obter um número de
November 15, 2012 Confidential Page 10 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements
Autorização de Devolução do Material (RMA – Return Material Authorization) e as instruções relativas ao envio.
Eliminación del producto
Ericsson cumple con la directiva 2002/96/EC del Parlamento Europeo y del Consejo de 27 de enero de 2003 sobre los residuos de aparatos eléctricos y electrónicos (RAEE).
Para la eliminación de equipo, incluyendo las pilas, contacte con el servicio de atención al cliente de Ericsson y obtenga el número de una Autorización de Devolución de Material (RMA) y las instrucciones para la expedición.
November 15, 2012 Confidential Page 11 of 12
Document Number BDTD02202-A03 Released
BelAir20E-11 Conformity and Regulatory Statements
Ericsson Inc. 603 March Road Kanata, Ontario Canada K2K 2M5
Visit us on the web at:
www.ericsson.com
November 15, 2012 Confidential Page 12 of 12
Document Number BDTD02202-A03 Released
12
Loading...