Ericsson Wi Fi 40005111 User Manual

BelAir20EO

BelAir20EO

Conformity and Regulatory Statements

Document Date: May 15, 2012
Document Number: BDTD02401-A03
Document Status: Draft

Security Status: Confidential
Customer Support: 613-254-7070

1-877-BelAir1 (235-2471)
[e-mail]

© Copyright 2012 by BelAir Networks.

The information contained in this document is confidential and proprietary to BelAir Networks. Errors and Omissions Excepted.
Specification may be subject to change. All trademarks are the property of their respective owners.
Protected by U.S. Patents: 7,171,223 / 7,164,667 / 7,154,356 / 7,030,712 / D501,195 / 7,545,782 / 7,433,343 / 7,162,234 and 7,433,361.
Patents pending in the U.S. and other countries.
BelAir Networks, the BelAir Logo, BelAir200, BelAir200D, BelAir100, BelAir100S, BelAir100C, BelAir100T, BelAir20, BelAir20M, BelAir20E, BelAir20EO, BelAir100M,
BelAir100i, BelAir100SN, BelAir100SNE, BelAir100N, BelAir100NE, BelAir100P, BelAir1000, BelAir1100, BelAir2100, BelAir3200, BelAirCC8000, BelView, BelView
NMS and BelAir Business Intelligence are trademarks of BelAir Networks Inc.

Page 1 of 16

BelAir20EO Conformity and Regulatory Statements Contents

Contents

Conformity and Regulatory Statements. . . . . . . . . . . . . . . . . . . . . 3

Regulatory Information and Disclaimers . . . . . . . . . . . . . . . . . . . . . . . .3

Manufacturer’s US Federal Communication Commission Conformity

Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

FCC Interference Statement . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Manufacturer’s Industry Canada Conformity Statement . . . . . . . . . . . .5

Manufacturer’s European Community Conformity Statement . . . . . . .8

Declaration of Conformity for RF Exposure . . . . . . . . . . . . . . . . . . . .11

Product Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

May 15, 2012 Confidential Page 2 of 16

Document Number BDTD02401-A03 Draft

BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory Statements

Conformity and Regulatory Statements

This section provides declarations of conformity and regulatory information for
the BelAir20EO.

This section contains the following sections:

• “Regulatory Information and Disclaimers” on page 3

• “Manufacturer’s US Federal Communication Commission Conformity

Statement” on page 4

• “Manufacturer’s Industry Canada Conformity Statement” on page 5

• “Manufacturer’s European Community Conformity Statement” on page 8

• “Declaration of Conformity for RF Exposure” on page 11

• “Product Disposal” on page 12

Regulatory Information and Disclaimers

Installation and use of this device must be in strict accordance with the
instructions included in the user documentation provided with the product.
Any changes or modifications to this product not expressly approved by the
party responsible for compliance could void the user’s authority to operate this
equipment.

The manufacturer is not responsible for any interference to radio or television
equipment caused by unauthorized modification of this device, or attachment of
any antennas or equipment other than those specified by the manufacturer. The
manufacturer or its authorized resellers or distributors will assume no liability
for any damage arising from failure to comply with these guidelines, or failure to
comply with local, regional or national safety, electrical or building codes, or
government regulations.

This product is manufactured in Canada with originating and non-originating
product.

Ce produit est fabriqué au Canada avec des matières originaires et non
originaires du produit.

May 15, 2012 Confidential Page 3 of 16

Document Number BDTD02401-A03 Draft

BelAir20EO Conformity and Regulatory Statements Conformity and Regulatory Statements

Manufacturer’s US Federal Communication Commission Conformity Statement

FCC Interference Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for assistance.

FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This device complies with FCC RF radiation exposure limits for an uncontrolled
environment. This equipment should be installed and operated with a minimum
distance of 10.25 inches (26 cm) between the radiator and your body.

May 15, 2012 Confidential Page 4 of 16

Document Number BDTD02401-A03 Draft