Ericsson Wi Fi 20008001 User Manual
Public Safety band Radio Module 2
PSM2 Product Manual
4.9GHz Public Safety band Access Radio Module
FCC ID RAR20008001
Document Date: April 2007
Document Number: PM-B2CG085AA
Document Version Number: 1
Document Status: Release
© Copyright 2007 by BelAir Networks.
All rights reserved..
Page 1 of 17
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module
Contents
About this Document..................................................................................................3
Introduction.................................................................................................................3
Picture of the B2CG085AA 4.9 GHz Public Safety band Radio............................ 4
General Conditions of Use.........................................................................................5
Overview of B2CG085AA module installation into BelAir Networks products..6
B2CG085AA module installation into BA100T product........................................7
BA100T Unit FCC Labeling......................................................................................9
Antenna Usage and Module Transmit Power........................................................ 10
Regulatory Statements.............................................................................................12
Appendix A –Approved antenna Specifications for the PSM2 module installed
in a BA100T unit: .....................................................................................................14
Page 2 of 17
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module
About this Document
This document is a product manual for the B2CG085AA 4.9 GHz Public Safety band Access Radio
Module 2, FCC ID RAR 20008001. The manual outlines the radio modules limitations on use in
BelAir Networks products marketed or offered for sale. An overview of BelAir Networks products
is included with information on the module installation in these products. Specifications on
approved antennas to be used with the module are provided This manual provides an outline on
the module installation , limitations of use, location of FCC label information , regulatory
statements and RF exposure minimum safety requirements.
Introduction
The B2CG085AA (hereafter referred to as “the module”) is a 4.9 GHz Public Safety band Access
Radio Module compatible with the IEEE 802.11 standard for WIFI operation. The module contains
a complete 802.11 radio.
The module is not intended for stand-alone operation. It will only be marketed as a complete
product, in conjunction with a package, DC power supply and antenna (hereafter referred to as “the
product” or the “final product”).
The module will operate under FCC part 90.
Page 3 of 17
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module
Picture of the B2CG085AA 4.9 GHz Public Safety band
Radio
Module is shown below for reference.
Top and bottom views;
Page 4 of 17
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module
General Conditions of Use
This manual is intended to supplement training provided by BelAir Networks or authorized parties.
The module B2CG085AA is only intended for use in BelAir Networks products and is not for sale to
the general public as a stand-alone module. Please read this entire document, including the
Regulatory Statements section before attempting to install or operate the module.
Warning: Any use of B2CG085AA in any manner which is not expressly specified within this
manual or specifically approved by BelAir Networks or its authorized agents will void the user’s
right to operate this module, and is expressly forbidden by BelAir Networks. This includes any
modification of the module, installation of the module in a configuration or used with an antenna
which is not expressly listed in this document or approved by BelAir Networks.
Installation into a Product
The module shall only be installed by a technician trained by BelAir Networks or its authorized
agents. It should only be installed into an approved product following all manufacturing and service
procedures for that product. Refer to the following sections outlining specific installation in BelAir
Networks products.
Module Service
The module is not intended as a field-serviceable unit. It contains no field-replaceable or fieldserviceable parts, or any external adjustable mechanisms. The module should only be serviced in a
manufacturing or service depot site approved by BelAir Networks or its authorized agents.
Country of Use
B2CG085AA is certified for use as an Intentional Radiator in the United States as device: FCC ID:
RAR20008001. Please read all regulatory statements at the end of this document before any attempt
to install or operate this module.
The module is only certified for operation in the United States. Before attempting to install and
operate this module in any other country, contact BelAir Networks for approval.
Page 5 of 17
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module
Overview of B2CG085AA module installation into
BelAir Networks products
List of Approved Final Products
The B2CG085AA module is only approved for
use in the following BelAir Networks products:
• BelAir100T. See BelAir documentation
for complete manufacturing instructions.
Operation of the module within the products
expressly listed above is required to ensure
compliance to all FCC regulations. Any
modification of the module, or its use in any
configuration not expressly listed above may
void the user’s right to operate this module.
The radio module is part of a multi radio system
in which the B2CG085AA is used for Public
Safety applications. The concept is as shown in
figure 1.
The module can be installed stand alone or with
up to two more BelAir Networks radio modules
in the same unit.
A typical block diagram of a two radio
configuration using one module
( B2CG085AA), Access Radio incorporated into
a BelAir Networks product is shown in figure 2.
BelAir Networks products incorporate other
functional blocks as shown, such as Line and
Power interface, battery back up and power
conditioning as well as a Backhaul Radio.
Fig. 1
Public Safety services using the B2CG085AA
(RAR20008001 ) radio module in BelAir Networks
products.
Fig. 2
Block diagram of a two radio configuration with the Public
safety module ( B2CG085AA) incorporated into a BelAir
Networks product is shown.
Page 6 of 17
Fig.2
Loading...