FCC ID: RAR20005003
RAR20005003 Product Manual
5 GHz WLAN Module with Antenna Switch Module
Document Date: July 2006
Document Number: PM-RAR20005003
Document Version Number: 1
Document Status: Release
© Copyright 2005 by BelAir Networks.
All rights reserved..
Page 1 of 12
RAR20005003 Product Manual – 5 GHz WLAN Radio Module
Contents
About this Document....................................................................... 2
Introduction...................................................................................... 3
Conditions of Use ............................................................................. 4
Module Installation and Service..................................................... 6
Final Product Requirements........................................................... 7
Regulatory Statements .................................................................... 9
About this Document
This document is a product manual for the FCC ID: RAR20005003, 5 GHz
WLAN Radio Module with Antenna Switch Module, including its limitations
on use in any product marketed or offered for sale. It is intended as a
supplement to training and documentation by BelAir Networks Inc. or its
authorized agents.
Page 2 of 12
RAR20005003 Product Manual – 5 GHz WLAN Radio Module
Introduction
The RAR20005003 (hereafter referred to as “the module”) is a 5 GHz radio
module compatible with the IEEE 802.11 standard for Wireless LAN operation.
It is designed to be interoperable with WLAN products which are based on
Direct Sequence Spread Spectrum (DSSS) radio technology.
The module contains a complete 802.11a radio and Medium Access Control
(MAC) protocol engine which allows implementation of an 802.11a device.
The module is not intended for stand-alone operation. It will only be marketed
as a complete product, in conjunction with a package, DC power supply and
antenna (hereafter referred to as “the product” or the “final product”).
Since the module has a BelAir networks proprietary digital interface, it cannot
be directly connected to any standard telecommunications or computer devices.
It can only be used with final products designed and authorized specifically for
that purpose.
Page 3 of 12
RAR20005003 Product Manual – 5 GHz WLAN Radio Module
Conditions of Use
General Conditions of Use
This manual is intended to supplement training provided by BelAir Networks or
authorized parties. The module RAR20005003 is only intended for use in
BelAir Networks products and is not for sale to the general public as a standalone module.
Please read this entire document, including the Regulatory Statements section
before attempting to install or operate the module.
Warning: Any use of RAR20005003 in any manner which is not
expressly specified within this manual or specifically approved by BelAir
Networks or its authorized agents will void the user’s right to operate this
module, and is expressly forbidden by BelAir Networks. This includes any
modification of the module, installation of the module in a configuration or used
with an antenna which is not expressly listed in this document or approved by
BelAir Networks.
List of Approved Final Products
The RAR20005003 module is only approved for use in the following BelAir
Networks products:
• BelAir200.
See product assembly instructions for complete details.
Operation of the module within the products expressly listed above is required
to ensure compliance to all FCC and Industry Canada regulations. Any
modification of the module, or its use in any configuration not expressly listed
above may void the user’s right to operate this module.
Country of Use
RAR20005003 is certified with limited modular approval for use in the United
States as an Intentional Radiator as device: FCC ID: RAR20005003 and in
Page 4 of 12