![](/html/35/35c2/35c29a637f54fb904fdff5a775fe8c77db17c4b4cc401434d3678c1d1a7ae6f2/bg1.png)
BEL20001
BEL20001 Product Manual
5 GHz WLAN Radio Module
Document Date: January 2004
Document Number: PM20001-001
Document Version Number: 3
Document Status: Release
© Copyright 2003 by BelAir Networks.
All rights reserved..
Page 1 of 12
![](/html/35/35c2/35c29a637f54fb904fdff5a775fe8c77db17c4b4cc401434d3678c1d1a7ae6f2/bg2.png)
BEL20001 Product Manual – 5 GHz WLAN Radio Module
Contents
About this Document ............................................................. 2
Introduction............................................................................. 3
Conditions of Use.................................................................... 4
Module Installation and Service ............................................ 6
Final Product Requirements.................................................. 7
Regulatory Statements........................................................... 9
About this Document
This document is a product manual for the BEL20001 5 GHz WLAN Radio
Module, including its limitations on use in any product marketed or offered for
sale. It is intended as a supplement to training and documentation by BelAir
Networks Inc. or its authorized agents.
January 2004 Page 2 of 12
PM20001-001 version 3
![](/html/35/35c2/35c29a637f54fb904fdff5a775fe8c77db17c4b4cc401434d3678c1d1a7ae6f2/bg3.png)
BEL20001 Product Manual – 5 GHz WLAN Radio Module
Introduction
The BEL20001 (hereafter referred to as “the module”) is a 5 GHz radio
module compatible with the IEEE 802.11 standard for Wireless LAN
operation. It is designed to be interoperable with WLAN products which are
based on Direct Sequence Spread Spectrum (DSSS) radio technology.
The module contains a complete 802.11a radio and Medium Access Control
(MAC) protocol engine which allows implementation of an 802.11a device.
The module is not intended for stand-alone operation. It will only be
marketed as a complete product, in conjunction with a package, DC power
supply and antenna (hereafter referred to as “the product” or the “final
product”).
Since the module has a BelAir networks proprietary digital interface, it cannot
be directly connected to any standard telecommunications or computer
devices. It can only be used with final products designed and authorized
specifically for that purpose.
January 2004 Page 3 of 12
PM20001-001 version 3
![](/html/35/35c2/35c29a637f54fb904fdff5a775fe8c77db17c4b4cc401434d3678c1d1a7ae6f2/bg4.png)
BEL20001 Product Manual – 5 GHz WLAN Radio Module
Conditions of Use
General Conditions of Use
This manual is intended to supplement training provided by BelAir Networks
or authorized parties. The module BEL20001 is only intended for use in BelAir
Networks products and is not for sale to the general public as a stand-alone
module.
Please read this entire document, including the Regulatory Statements section
before attempting to install or operate the module.
Warning: Any use of BEL20001 in any manner which is not expressly
specified within this manual or specifically approved by BelAir Networks or its
authorized agents will void the user’s right to operate this module, and is
expressly forbidden by BelAir Networks. This includes any modification of the
module, installation of the module in a configuration or used with an antenna
which is not expressly listed in this document or approved by BelAir
Networks.
List of Approved Final Products
The BEL20001 module is only approved for use in the following BelAir
Networks products:
• BelAir200. See BelAir200 documentation for complete manufacturing
instructions. The BelAir200 may contain up to three BEL20001 (FCC ID:
RAR20001001, IC: 4674A-20001001) and up to one of module BEL20000
(FCC ID: RAR20000001, IC: 4674A-20000001).
Operation of the module within the products expressly listed above is
required to ensure compliance to all FCC and Industry Canada regulations.
Any modification of the module, or its use in any configuration not expressly
listed above may void the user’s right to operate this module.
Country of Use
BEL20001 is certified with limited modular approval for use in the United
States as an Intentional Radiator as device: FCC ID: RAR20001001 and in
January 2004 Page 4 of 12
PM20001-001 version 3