Ericsson LG IP8830 User Manual

Regulatory and Safety Information
Please save these instructions and read carefully
USA-FCC (Federal Communications Commission) Statement
This device complies with Part 15 of the FCC Rules. Op­eration is subject to the following two conditions:
This device may not cause harmful interference, and
1
This device must accept any interference received, in-
2
cluding interference that may cause undesired opera­tion.
FCC Interference Statement Note: This equipment has been tested and found to com-
ply with the limits for a Class B Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency and, if not installed and used in accordance with the instructions, may cause harm­ful interference to radio communications. However, there is no guarantee that interference will not occur in a par­ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
1 2
Increase the separation between the equipment and receiver.
3
Connect the equipment into an outlet on a circuit differ­ent from that to which the receiver is connected.
4
Consult the dealer or an experienced radio/TV techni­cian for help.
Compliance Statement for Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device complies with Class B Limits of Industry Cana­da. Operation is subject to the following two conditions;
This device may not cause harmful interference, and
1
This device must accept any interference received, in-
2
cluding interference that may cause undesired opera­tion.
European Union Declarations of Conformity
LG-Nortel Co. Ltd. declares that the equipment specied in this document, which bears the “CE” mark, conforms to the European Union Radio and Telecommunications Terminal Equipment Directive (R&TTE 1999/5/EC), including Elec­tromagnetic Compatibility Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).
The product fullls the essential requirements of the har­monized standards shown above.
Product Safety Instructions
This product complies with and conforms to the following international Product Safety standards as applicable:
Safety of Information T echnology Equipment, IEC 60950-1, including Relevant national deviations as listed in Compli­ance with IEC for Electrical Equipment (IECEE) Safety of Information Technology Equipment, CAN/CSA-C22.2 No. 60950-1/UL 60950-1
E-911 and This Phone’s Use with Multi-Line Telephone Systems
Please note that the use and operation of this phone as part of a multi-line telephone system (MLTS) may be sub­ject to state and/or federal E-911 MLTS laws that require the MLTS to provide a caller’s telephone number, exten­sion, and physical location to applicable state and/or lo­cal emergency services when a caller initiates a 911 call. This phone does not provide a caller’s telephone number, extension, or physical location information to emergency services when a caller dials 911, and compliance with state and/or federal E-911 MLTS laws is the sole responsibility of the purchaser of this phone.
Regulatory Information and Disclaimers
“Privacy of communications may not be ensured when us­ing this telephone”.
Any changes or modications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The Manufactur­er is not responsible for any radio or television interference caused by unauthorized modication of this device, or the substitution or attachment of connecting cables and equip­ment other than those specied by the manufacturer. It is the responsibility for the user to correct any interference caused by such unauthorized modication, substitution or attachment.
The manufacturer and its authorized resellers or distribu­tors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guideline.
Pursuant to Part 15 of the Federal Communications Commission(FCC) Rules, the user is cautioned that chang­es or modications not expressly approved by LG-Nortel. Could void the user’s authority to operate this equipment.
Important Safety Instructions
Before connecting or using your new phone, take a
• moment to consider safety and reliability. Use common sense when locating, connecting and using you Phone.
Locate on a dry level surface away. Keep the phone away from the edges of the surface to avoid the potential of a fall.
Locate cables to avoid potential for damage. For exam­ple, do not locate under rugs or carpet as damage may result from foot trafc or heavy objects. Also, do not lo­cate cables between the desktop and walls where they may be crushed, damaging the insulation.
Check the cables regularly and, if damage is noted, dis­connect your phone. Contact your local representa-tive for a replacement.
Should liquid spill on the phone, disconnect the unit from power and the network.
Do not use during lightning storms. Lightning presents a potentially lethal shock hazard.
Clean the phone with a soft dry cloth; do not use liquid cleaners.
Always use caution when connecting to AC power. Use only with a properly grounded standard AC power outlet.
Printed In Thailand. Copyright © 2008 LG-Nortel Co.Ltd. All rights reserved.
P/NO: MMBB1234567,1.0
Regulatory and Safety Information 1.0.indd 1Regulatory and Safety Information 1.0.indd 1 2008-01-24 오후 3:14:552008-01-24 오후 3:14:55
IP8830 Series Quick Installation Guide
This document provides information about the IP8820, IP8830, and IP8840. Y ou can download all required docu­ments at www.lg-nortel.com.
Before you start
If you require a Global Power Supply for your IP Phone, use the LG-Nortel approved global power supply.
Package contents
The following items are included in your IP8800 Series package. Before installation, ensure that you have the following package contents:
• IP Phone (IP8830) • Foot Stand • Handset
• Handset Cord • 2.0m CAT5 Ethernet Cable • Number Plates (2ea) (only for IP8820/IP8830)
Installation
To install this IP Phone correctly, please follow the procedures. Please refer to the gures as shown below.
Attaching the foot stand
Decide if you will be attaching the foot stand angle either 35 degree or 55 degree.
Top Tabs
Align the top tabs on the foot stand with the slots on the back of your IP Phone. Please refer to the gures left for the correct place­ment of the foot stand.
Turn the foot stand upside down; Align the top tabs on the foot stand with the slots on the back of your IP Phone. Please refer to the gures left for the correct placement of the foot stand.
And then, move the foot stand upward until it clicks into place.
The IP Phone sits at a 35
degree angle.
IP8800 Series Quick Installation Guide
IP-88XX Quick Installation Guide 1.2.indd 1IP-88XX Quick Installation Guide 1.2.indd 1 2008-06-11 오후 1:46:032008-06-11 오후 1:46:03
And then, move the foot stand upward until it clicks into place.
The IP Phone sits at a 55
degree angle.
+ 3 hidden pages