ERICSSON DT200 User Manual
Cordless Phone 230
DT200 Handset BS230 Base Station
DECT/GAP Digital
User’s Guide
Use
l
ia
c
r
unic
e
m
Com
B
ons A
i
t
a
or Comm
f
Not
ricsson Mobile
E
What to read first
This user’s guide consists of several sections and topics which can be read individually. You will
find each section and to pic listed in the table of contents. In addition, th e “Index” at the back of
this guide shows where to find help on each topic. If you are already familiar with this type of
product, the “Quick start ” se ct ion helps you get the phone up and running quickly. However, for
basic use of the phone, you sho uld read the “Getting sta rt ed” section and “Using the menus” on
page 19 in particular. Other parts can be read when needed.
About this user’s guide
This user’s guide is published by Ericsson Mobile Comm unications AB, without any warranty.
Improvements and changes to this user’s guide necessitated by typographical errors, inaccuracies
of current informati on, or changes to programs and/or equipment, may be made by Ericsson
Mobile Communicati ons AB at any time and without notice. Such cha nges will, however, be
incorporated into new editions of this user’s guide. All rights reserved.
U
l
se
ions
t
a
AB
Cordless phone features
• Superb sound quality
• Comfortable, ea sy-to-use handset
• Large illuminated display
• Phone book for 100 names and numbers
• Advanced calling costs manage ment
• Expandable from 1 to 8 handsets
• Total priv acy, no eavesdropping
omme
C
Not for
c
r
omm
e C
l
ia
unic
sson Mobi
c
Eri
HANDSET
Volume up key
Volume down key
BASE STATION
Handset
compartment
Antenna
Off hook key
Up key
Number keys
Microphone
omme
C
e C
l
Warning light
Earpiece
Display
On Hook/On/Off key
U
Clear/Mute key
l
Down key
ia
c
Battery compartment (back)
r
Internal call key
R key
Accessory contacts
omm
se
ions
t
a
unic
Page button
External line
light
AB
Charging light
Eri
Not for
sson Mobi
c
Desk stand
(back)
Cable
connection
(back)
HANDSET DISPLAY ICONS AND INDICATORS
On Flashing Flashing quickly
Signal strength Visible when con-
Ring off Ring signal muted or
Key Keys locked
Hook Handset off hook Connection being made Handset is ringing
nected to a base station
microphone off
ons A
i
Message New message received
Use
Call Info New unanswered entry
in the who called list
Battery Battery status (4 blocks
is fully charged)
Battery casing flashes;
battery almost empty
l
ia
c
r
Warning light Baby phone call
interrupted
BASE STATIONS INDICATORS
On Flashing Flashing quickly
Red top light External line occupied Incoming external call No external line
Green bottom light Handset battery is
being charged
Warning (battery low/no
e
connection)
Com
unic
m
t
by the voice mailbox
a
Blocks flash successively; battery is being
charged (steady blocks
indicate the battery
level)
Incoming call
Message waiting
connection
B
For further details, please see sect ion “Reference” on page 85 of the user’s guide.
or Comm
f
Not
ricsson Mobile
E
QUICK START
This page helps you to get t he cordless phone up and running quic kly. For a more detailed instal-
lation procedure, see “Preparing for use” on page 9. You should read the “Getting started” section
afterwards.
B
ons A
i
t
Use
l
a
ia
c
r
unic
e
m
Com
or Comm
f
Not
ricsson Mobile
E
Contents
B
Getting started 9
What is in the box9
Preparing for use 9
Battery 12
Switching the handset on and off 15
Attaching and removing the clip 15
A brief guide 16
Information on display 18
Using the menus 19
Changing the menu language 20
Telephoning 23
Making a call 23
Call using the phone book 23
Redialling 25
Returning a call 26
Receiving a call 27
Turning off the microphone 27
T urning off the ringer and warning sound 27
Paging a handset from the base station 28
Advanced
telephoning 29
or Comm
When using more than one handset 29
Making and receiving an internal call 29
Receiving a second call 30
Searching for handsets or people 31
Consulting with another handset or
transferring a call 31
Making a three-party call 32
Setting the handset to tone dialling 32
Setting the handset to long tones 32
Sending a dial tone pause 33
Not
f
Phone book 35
Phone book use 35
Adding name and number 36
Adding last dialled numbers 36
Adding caller’s number 37
Editing names and numbers 38
Use
l
Deleting names and numbers 39
ia
Personalizing the
c
handset 41
r
Language 41
e
Earpiece volume 41
Ring volume 42
Ringer tones or melodies 42
Discreet ringing 43
Automatic answering 43
Key click43
Display light 44
Display contrast 44
Com
Clearing all handset settings 44
Personalizing the base
station 45
Changing settings (PIN code) 45
Language 45
Ring volume 46
Ringing order 46
Call waiting notification 47
Priority phone 47
Least cost routing 49
Dial tone pause 50
Clearing all base station settings 51
unic
m
ons A
i
t
a
ricsson Mobile
E
Blocking keys and extra
security 53
Blocking handset keys53
Setting handset locks 53
Changing the handset PIN code 54
Unblocking the handset 55
Changing the base station PIN code 56
Resetting the base station PIN code 57
Showing the IPEI code 57
Overview PIN and other codes 58
Extra features 59
Emergency call 59
Baby phone 59
Direct call 60
Call barring 61
Exempt numbers 62
Call tariff 63
Call budget 64
Call statistics handset 66
Call statistics base station 66
Voice mail67
Subscribing handsets 68
Using multiple base stations 70
Single or multi-cell mode 71
Using a switchboard 71
Pulse or tone dialling 72
Signalling methods 73
Transferring calls 75
Tips and tricks 83
Reference 85
Safety instructions 85
Troubleshooting 85
Buttons and keys 88
Display icons and terminology 89
Signals 90
Menu structure 91
Maintenance 93
Technical specifications 93
Spare parts and accessories 96
Warranty 96
Use
l
Index 99
i
t
a
ia
Handset quick
c
reference (inside back
r
cover)
e
unic
m
Com
B
ons A
Using base stations 77
Connecting to base stations 77
Subscribing to a base station 78
Re-subscribing to a base station 79
Selecting another base station 80
Editing base station name 81
Deleting subscription 82
or Comm
f
Not
ricsson Mobile
E
Use
l
ia
c
r
e
Com
unic
m
B
ons A
i
t
a
or Comm
f
Not
ricsson Mobile
E
Getting started
WHAT IS IN THE BOX
Make sure that all the parts are in the box. If anything is missing, please contact your dealer.
The box should contai n:
1. Base station
2. Desk stand for the base station
3. Wall mounter for the base station
4. Screws and plugs for the wall mounter
5. Handset
6. Battery
7. Clip
8. Power adaptor with cable
9. Telephone line cable
10.User’s guide
11.Warranty card
PREPARING FOR USE
To install the set, follow the steps below. The cordless phone will then be
ready for use.
r
e
Com
Use
l
ia
c
m
unic
ons A
i
t
a
B
Warnings Make sure the local mains voltage corresponds to the voltage on
the power adaptor.
Only use the power adaptor that comes with the set.
or Comm
f
Not
ricsson Mobile
E
Getting started 9
When installi ng t h e c o rdless phone, it is importan t that you closely follow
the procedure belo w:
1. Attach the clip to the handset.
ons A
i
t
Use
l
a
B
2. Insert the battery in the handset.
or Comm
f
Not
ia
c
r
unic
e
m
Com
10 Getting started
ricsson Mobile
E
3. Find a suitable location for the base station. To make the best use of its
operating range, put your base station in a central positi on. You can place
it on a table using the desk stand or mount it on the wall using the wa ll
mounter.
4. If you place the ba s e station on a wall, sc rew th e wall mounter to th e wall.
ons A
i
t
Use
l
a
ia
c
r
unic
e
m
5. Connect the tel ep hone line to the telephone socket in the base station.
Telephone socket identifier
B
Home 1
6. Connect the tel ephone line to the analogue telephone wa ll socket.
7. Connect the power cord to t he power plug soc ket i n the base station.
Com
Power plug socket identifier
8. Connect the desk stand to the base station or connect the base station to the
or Comm
wall mounter. Put the lower hooks in first.
f
For the desk stand, route the c ables through the slots at the back.
9. Put the handset into the base station as shown in the picture. The hand set
must be off.
10.Put the power adaptor plug into the wall so cket.
If you see a red, flashing light on the top of the base station, there is a fault
Not
with the telephone l ine connection.
After a few minutes the handset will subscribe itself to the base station and
turn on automatically.
11.Leave the handset in the base station for at least 3 hour s to charge the bat-
tery for the first time.
ricsson Mobile
E
Getting started 11
If the handset does not turn on automatically, remove the power adapter plug
from the wall socket and repeat from step 9. If that does not help, please refer
to “Subscribing handsets” on pa ge 6 8.
B
When the battery is charged, the handset is ready for use. For more inform a tion about charging the bat te r y, please refer to “ Battery” below.
Important
It is important to make a note of the IPEI code. You may need it to reset the
handset’s PIN code. Please refer to “Showing the IPEI code” on pa ge 5 7 for
further details.
Note We also recommend that you change the pin code of the base station
directly after installing the cordless phone. See “Changing the base stat ion
PIN code” on page 56 for more information. See also “Overv iew P IN and
other codes” on page 58 for the PIN code of the handset and of the base
station.
Operating range
You can use your handset in the area that is covered by the base station. Outside this area, you lose contact with the ba s e sta tion and the signal strength
indicator on the display disappears. The warning light flashes and you hear
short, fast, warning beeps.
To make best use of the operating range, plac e your base station in a centra l
position.
r
e
Use
l
ia
c
m
unic
ons A
i
t
a
BATTERY
The handset is powered by a rechargea bl e battery. You can fully charge a flat
battery by placing the handset in the base station for 3 hours. A fully charged
battery gives you up to 15 hours of callin g time or up to 100 hours of standby
time. The handset has a battery meter, which indicates you how much power is
or Comm
left in the battery.
f
Note The handset is powered by a Nickel Metal Hydride (NiMH) battery. It
can be recharged at any time. To keep the battery fully charged, you can put or
leave the handse t in the base station wit hout any problem.
Not
12 Getting started
ricsson Mobile
E
Com
Placing the battery
Place the battery as shown below. Make sure that the batter y w ire s are put
through the notches as shown.
ons A
i
t
Use
l
a
ia
c
r
unic
e
m
B
Home 1
Com
Reading the battery meter
When the battery is fully charged, the battery meter on the handset display
or Comm
consists of four blocks. The num ber of blocks decreases as the battery dis-
f
charges. If the battery is almost flat, the battery meter and the red light on the
handset flash. An al arm sounds if there is les s than 15 minutes’ calling time
left in the battery.
Not
ricsson Mobile
E
Getting started 13
Charging the battery
Place the handset in the base station as shown in the picture below.
ons A
i
t
Use
l
a
ia
If the lower green light on the base station is on (and the battery meter on the
display flashes), the battery is being charged. As soon as the battery is fully
charged, the lower green ligh t i s t urne d off an d the battery meter on the handset stops flashing.
If the battery is co mpletely flat it can take a few minutes before the lower
green light on the base station comes on.
Changing the battery
Rechargeable batterie s have a limited lifespan. Under normal co nditions, the
handset battery will la st for at least a year.
If the standby time for the handset becomes too low, you should replace the
battery. Please contact your dealer for more information.
or Comm
Warning Only use batteries as specified in “Technical specifications” on
f
page 93.
The battery does not contain cadmium and is therefore more environmentallyfriendly than other rechargeabl e ba t te rie s. However, all batteries should be
treated as chemical waste.
c
r
unic
e
m
Com
Not
B
14 Getting started
ricsson Mobile
E
SWITCHING THE HANDSET ON AND OFF
While the handset is switch ed on, it is in standby mode. In standby mode , the
handset is ready to make or receive calls but consumes less ene rgy. With a
fully charged battery, the handset can operate for about 100 hours in standby
mode. If you are not using the ha ndse t to ma ke or re ce ive calls, you can put
the handset in the base stati on t o keep it fully charged.
Switching the handset on
B
Home 1
Before you can use the handset you must switch it on:
• Press
After switching on, informa tion i s displayed. For more details see “Inform ation on display” on page 18.
Switching the handset off
If you do not want to make or receive calls, you ca n switch the handset off.
• Press and hold
You cannot turn the hand set off durin g a c al l.
If the handset is off and you receive an external call, the ring signal on the
base station still works. Press
then
NO for at least one second to switc h the handset on.
The standby display appears. The number on the right-hand side is the
internal number of th e ha ndset on the base station.
Use
l
ia
c
To switch the handset off:
NO until the display turns blank.
YES to receive the call.
r
e
NO for one second to switch on the handset,
Com
unic
m
ons A
i
t
a
ATTACHING AND REMOVING THE CLIP
The handset has a clip which you can use to attach the handset to your clothes.
• Attach the clip to the handset. Do not press on the display!
or Comm
Your handset is now ready for use.
f
T o minimize wear and tear, we recommend that you do not remove the clip
from the handset too ofte n. See a lso t he drawings below.
Not
ricsson Mobile
E
Getting started 15
Attaching the clip
Removing the clip
r
e
Use
l
ia
c
m
B
ons A
i
t
a
unic
A BRIEF GUIDE
After installing the co rdl ess phone you can now make and receive calls. For
initial use, it is as s umed that you are near the base station and that the signal
strength indicator is vi sible.
Using the base station
The base station covers an area in which the handset can ma ke and receive
calls via a radio connection. To establish a radio connection, your handset
Home 1
requires a subscription to the base station. The name of the base station is displayed on the handset.
Not
If your handset is connec te d to a base stat i on, thi s is sh own by the sig nal
strength indicator. If the indicator is visible, you can make and receive telephone calls.
16 Getting started
ricsson Mobile
E
Com
or Comm
f
No Network
Home 1
ons A
i
t
If the indicator is not visi ble, then the handset is not co nne cted to a base station. This may me an:
• You are out of range.
Check that the base station is on and that you are within range.
• There is no access to the base s tation.
The handset is not able to conne ct or its access rights may have changed.
Set the handset to automatic base station selection and i f that does not
help, subscribe the handset to the base station again.
• There is no subscription to the base station.
Subscribe the handset to the base station.
Please refer to section “Using base stations” on page 77 for further
information.
r
e
Use
l
ia
c
m
unic
a
Com
Switching on
Before you can use the handset you must switch it on:
• Press
Making a first call
Check that the set is installed correctly by dialling a person you know.
NO for at least one second to switc h the handset on.
or Comm
The standby display appears. The number on the right-hand side is the
f
internal number of th e ha ndset on the base station.
B
0:00:06
0201482571
Not
To make a call:
1. Press
2. Dial the number you want to call using the number keys.
3. Wait for an answer and, on completing your call, ask the person to call you
YES and you can hear the dia l tone.
A red light appears on the top of the base station.
You hear the ringi ng tone.
back.
ricsson Mobile
E
Getting started 17
ExternalCall
4. Press NO to end the call.
The duration of the call is displayed. If a vailable, the costs of the call are
also displayed.
For more information about displaying call costs, see “Call tariff” on page 63.
If you dial a number but can still hear the dial tone, you probably have to set
the base station to an other dialling method. See “Pulse or tone dial li ng” on
page 72 for more details.
Receiving a call
If someone calls you, the handset an d the base station ring.
To receive a call:
1. Press
2. Have a conversation.
3. Press
Switching off
If you do not want to make or receive calls you can switch the handset off.
• Press and hold
After switching on the handset , the di splay may show several icons and other
information.
YES to answer the call.
NO to end the call.
The duration of the call is displayed. If a vailable, the costs of the call are
also displayed.
Use
l
ia
c
r
To switch the handset off:
base station continues to work even if you switch off the handset .
INFORMATION ON DISPLAY
e
NO until the display turns blank. The ring signal on th e
unic
m
Com
ons A
i
t
a
B
Signal strength
A signal strength indicator is shown on the le ft-hand side of the display when
the handset is connected to a base station. It is a meas ure of reception quality.
Not
Five vertical bars means good reception quality and no bars means no connection. In areas where the reception quality is poor, you risk losing calls.
Home 1
18 Getting started
ricsson Mobile
Base station name
The name of the currently-connected base station i s displ ay ed when the handset is on standby. The default base station name is
E
or Comm
f
Home
but you can set the
base station name yourself. This is described in “Edi ti ng base station name”
on page 81.
Home 1
ExternalCall
0:12:53
Anna
>PhoneBook
Handset
Extension number
Your internal number is shown on the right-hand side of the display when the
handset is on standby. The internal number ma y not be shown when the handset is connected to another type of base station.
Call information
When the handset rings, the typ e of cal l is di spl aye d.
Call costs or duration
During a call, the handset displays the duration of the call. The display also
shows call costs at the end of the call, if a call tariff and metering puls es are
available. For more details, see “Cal l tariff” on page 63.
USING THE MENUS
The handset can be operated via menus . For ins t ance, you can enter the main
menu option
UP or DOWN key again to scroll through other options. Press YES to confirm
an option. Some options take you into a new menu. Press
previous menu.
PhoneBook
by pressing either th e UP or th e DOWN key. Press the
r
e
Use
l
ia
c
m
unic
ons A
i
t
a
NO to return to the
B
Com
When scrolling through the menu you can return to the standby display or pre-
or Comm
f
vious menu by pressing
If you do not press any key for a minute, the hand set aut omatically reverts to
the standby display.
Note The handset makes use of “dynamic” menus, which means that some
Not
menu options are only visible where applica ble.
The topics that fo ll ow (changing the handset and the base stati on menu language) show you how the menus work. For changing the handset menu language, every step of the procedure is given in detai l. For al l ot he r procedures
(including changing the base station menu language), it is assumed that you
NO once or repeatedly, at any time.
ricsson Mobile
E
Getting started 19
know your way around the menus. This gui de on l y tells you where to enter a
PIN code and what menu item t o select for a specific function. To help you
locate the menu items that are not in the main menu, a path through the menus
is given at the beginning of each procedure. These paths are indicat e d by th e
word “Route:” followed by menu items you have to select in sequence in order
to get to a specific function. In most ca se s, the next menu item is not immediately visible so you have to use th e
“Menu structure” on page 91 for an overview.
UP or DOWN key to locate it. See also
B
Navigation keys
Cancel
Use
l
Up Down
t
a
i
BackConfirm
ia
Cancel
You can cancel any operatio n:
• Press
Handset menus
The default menu language is English. To select another language, use the
Language
confirm your language c hoice.
1. Press UP or DOWN to enter the main menu.
2. Scroll to
3. Scroll to
4. Scroll through the list of languages until you find the languag e you want.
5. Press
Not
CLR shortly.
The handset returns to standby.
CHANGING THE MENU LANGUAGE
option. Please note that t he me nu options stay in English until you
To change the handset lan guage:
Handset » Language
Route:
or Comm
f
PhoneBook
Option
The current la nguage is displayed.
YES to confirm your choic e.
The language has now been changed.
Handset
Language
is displayed.
and press YES.
and press YES.
c
r
unic
e
m
Com
ons A
20 Getting started
ricsson Mobile
E
Base station menus
The base station menus form a part of the handset me nus. They are normally
in the same language as the handset menus. If the handset language is not
available, the base station chooses English by default. To select another
Language
default language, us e the
note that the menu options stay in English until you confirm your languag e
choice.
Please note that the procedure assumes that you are going to select the
option. After you have entered your PIN code, you have to go to the
option.
To change the base station’s default la nguage:
BaseStation » Basic » Language
Route:
1. Select
2. Enter the PIN code for the base station (see page 58) and press
3. Select
4. Scroll through the list of languages until the language you want is selected.
5. Press
Basic
PIN:
The current la nguage is displayed.
The base station language ha s now been ch anged.
and press YES.
is displayed.
Language
and press YES.
YES to confirm your choic e.
option in the base station men us. Plea se
t
Use
l
a
ia
c
r
unic
e
m
ons A
i
Basic
Language
YES.
B
Com
or Comm
f
Not
ricsson Mobile
E
Getting started 21
Use
l
ia
c
r
unic
e
m
Com
B
ons A
i
t
a
or Comm
f
Not
22 Getting started
ricsson Mobile
E
0-0535554505
Telephoning
B
MAKING A CALL
When you make a call, you can enter the number and then press YES. This is
called pre-dialli ng a nd al lows you to check and, if necessary, correct the
number.
To pre-dial:
1. Enter the number.
The number is displayed.
2. Correct the number if necessary (
move right).
3. When the numb er is correct, press
4. Press
Tip While editing a telephone number, you can “jump” to the most left or the
most right digit by respectively pressing
You can enter a dial tone pause in the telephone number by pressing
second.
NO to end the call.
The duration of the call is displayed. If a vailable, the costs of the call are
also displayed.
r
e
Use
l
CLR = delete ; UP = move left; DOWN =
ia
YES and wait for an answer.
c
unic
m
UP or DOWN for one second.
ons A
i
t
a
for one
00535554505
Dialling while off hook
To make a call in the usual way:
1. Press
2. Dial the number and wait for a connection.
3. Press
Your handset contains a phone book for storing names and numbe rs. You can
conveniently make calls using this phone book. To add names and numbers to
Not
the phone book, see section “Phone book” on page 35 .
YES and wait for the dial tone .
NO to end the call.
or Comm
The duration of the call is displayed. If a vailable, the costs of the call are
f
also displayed.
CALL USING THE PHONE BOOK
Com
ricsson Mobile
E
Telephoning 23
Calling by name
The call by name option l et s you search for a name and num be r in the phone
book.
To call by name:
PhoneBook » Find&Call
Route:
1. Select
2. Press the key which has the first letter of the name you are searching for.
3. Correct the name if ne cessary (
4. Press
5. Scroll until you find the right name.
6. Press
If you press
Tip W hi le edi ting a name you can “jump” to the most lef t or the most right
letter by respectively pressing
whole name by pressing
Quick call by name
You can also search for a number by name in your phone book without using
the menus.
1. Press the key which has the first letter of the name, and hold down the key
Not
2. You can now enter more lett ers as in step 1, or scroll unti l you find the
3. Press
If you press
Find&Call
Enter Name:
the phone book, see “Adding name and number” on pa ge 3 6.
Press once for the first letter of the key, twice for the second and thre e
times for the third letter of the key. To narrow down the search, you can
also enter the next letter(s) of the name .
move right).
The first name in the phone book beginning with the entered letter(s) or, if
it does not exist, a name begi nni ng with the next letter is displayed.
and press YES.
or
Phone book is empty
is displayed. To add names and numbers to
ons A
i
t
a
YES to confirm.
CLR = delete; UP = move left; DOWN =
Use
l
ia
YES to dial the number.
CLR instead of YES, you can edit the number before dialling.
r
e
c
unic
m
UP or DOWN for one second. You can clear the
CLR for one second .
Com
To use quick call by name:
until the display shows the first name in the phone book beginning with the
or Comm
letter on the key you have just pressed. For the second lette r of the key,
f
press the key again, without holding it down. For the thi rd letter, press the
key twice.
The display shows the first name in the phone book begi nning with the
chosen letter or, if it does not exist, only the letters you entered. In the la tter case, the last and incorrect letter flashes. You can enter another letter to
correct it. If the phone book is empty, see “Adding name and numb er” on
page 36 for more informati on.
right name.
YES to dial the number.
CLR instead of YES, you can edit the number before dialling.
B
24 Telephoning
ricsson Mobile
E
1
Sabrina
Example:
Suppose you want to call someone whose name i s ‘Jone s’ . Press num be r key
5 and hold until the first name in the phone book beginning with ‘J’ appears.
Press number key 6 three times for the ‘O’. The first name in the phone book
beginning with ‘Jo’ appears. You can now continue by pressing number key 6
twice for the ‘N’ and so on or scroll until yo u find the nam e ‘J one s’. Press
YES to dial the number.
REDIALLING
The last ten numbers you dialled are available for redial.
To redial the last number dialled:
1. Press and hold
appears.
The handset beeps if there are no names or numbers available for redial. If
the number appears in the phone book, the name is shown instead.
2. Press
The handset dials the nu mb er again.
To dial one of the ten last dialled numbers:
1. Press and hold
appears.
The handset beeps if there are no names or numbers available for redial. If
the number appears in the phone book, the name is shown instead.
2. Scroll until you have the righ t nu m ber or name.
3. Press
If you press
You can also access the la st dialled number mem ory via the
LastDialled
option
redial.
YES and wait until the last di al led number or name
YES for the second time.
Use
l
ia
c
r
YES and wait until the last di al led number or name
e
unic
m
YES to dial the selected number.
CLR instead of YES, you can edit the number before dialling.
Com
. It is only available if names or numbers are available for
ons A
i
t
a
Information
B
menu
When you switch off your handset, the last dialled numbers are erased. You
or Comm
can permanently store the last dialled numbers in your phone book. See “Add-
f
ing last dialled numbers” on page 36.
Not
ricsson Mobile
E
Telephoning 25
Check
Who Called ?
RETURNING A CALL
When you receive an internal cal l, the number (or name) of th e caller is displayed. In that cas e the number is stored in the who called memory. The call
info icon shows you if there are new unanswered calls. By using the call return
function, you can ea s ily return a call to the s e numbers. The who called memory holds up to ten numbers.
B
1!
Sabrina
1A
Sabrina
NO.
a
Information
Check Who Call ed ?
ons A
i
t
A
.
menu option
A
.
When there are ne w u nans wered cal ls, th e hands et dis plays
you do not want t o re turn a call at this stage, press
To return a call now:
1. Press
2. Scroll until you have the righ t nu m ber or name.
3. Press
You can also acces s the who called memory via the
WhoCalled
returning a call.
1. Select
2. Scroll until you have the righ t nu m ber or name.
3. Press
If you press
YES.
A list of numbers appears. If the number appears in the phone book, th e
name is shown instead .
New entries are marked with an exclamation mark. Calls that have been
answered with thi s handset are marked w it h the letter
INT to dial the selected num be r.
The number is removed from the who called memory and stored in the last
dialled memory.
r
Use
l
ia
c
unic
e
m
. You have this option only if name s or numbers are available for
To return one of the last ten calls:
Information » WhoCalled
Route:
WhoCalled
and press YES.
A list of numbers appears. If the number appears in the phone book, th e
name is shown instead .
New entries are marked with an exclamation mark. Calls that have been
answered with thi s handset are marked w it h the letter
or Comm
INT to dial the selected num be r.
f
The number is removed from the who called memory and stored in the last
dialled memory.
CLR instead of INT, you can edit the number before dial l ing.
Com
If
When you switch off your handset, the who called list is erased. You can per-
Not
manently store the who called num bers in the phone book. See “Adding
caller’s number” on page 37.
26 Telephoning
ricsson Mobile
E
ExternalCa ll
InternalCall
Anna
ExternalCa ll
ExternalCa ll
RECEIVING A CALL
When the handset rings:
1. Press
2. To end the call, press
On an incoming internal call, the caller’s handset number is disp l ayed. If the
caller’s number is included in your han d se t phone book, the correspondi ng
name is displayed inste ad .
Sometimes the handset rings at an inconvenient moment. If you do not want to
answer the call, press
call.
During a call you may want to talk to someone else, without the caller hearing.
You can do this by switching off the microp hone using the
• Pressing
• Pressing
YES to answer the call.
The duration of the call is displayed. If a vailable, the costs of the call are
also displayed.
NO.
ons A
i
NO. You can press YES if you still want to answer the
TURNING OFF THE MICROPHONE
Use
l
t
a
ia
c
Y ou can switch the microphone off by:
CLR until you are read y to t al k to the caller again.
Short beeps and the ring off icon ind ic ate that the microphone is off.
Or
CLR quickly.
Short beeps and the ring off icon ind ic ate that the microphone is off. To
switch the microphone on, press
r
e
unic
m
CLR again.
CLR key.
B
Com
TURNING OFF THE RINGER AND WARNING SOUND
If your handset rings or a warning sounds at an inconvenient moment, you can
turn off the sound.
or Comm
To turn off the ring sound temporarily:
f
• Press
CLR quickly.
The ring of f icon appears.
Home 1
Even with the sound off, you can still answer the call. The warning light and
hook icon keep flashing.
Not
To turn off the ring or the warning sound permanently:
• Press
If a warning sounds and you press
turned off. The warning light conti nues to flash.
CLR for one second.
The ring of f icon appears.
CLR for one second only the sound is
ricsson Mobile
E
Telephoning 27
You can also turn off the ringe r permanently by adjusting the ring volume to
its lowest level. See “Ring volume” on page 42.
Page Call
To turn the ring or the warn ing sound on again:
• Press
The base station has a search function with which you can page the handsets
connected to it.
Press the
Page Call
ton on the base station once, to stop the ringing.
CLR for one second.
The ring off icon disappears.
PAGING A HANDSET FROM THE BASE STATION
PAGE button on the base stati on, and the handset rings.
appears in the handset display. Press YES and NO, or the PAGE but-
Use
l
ons A
i
t
a
ia
Page button
r
c
unic
e
m
Com
B
or Comm
f
Not
28 Telephoning
ricsson Mobile
E
Call Back
Advanced telephoning
WHEN USING MORE THAN ONE HANDSET
If you use more than one handset with the base station, here are a few special
hints.
Internal or external call?
When you receive a call, ther e i s a different ring signal for interna l and ext ernal calls:
• An internal ring signal has a two-second signal followed by a four-second
pause.
• An external ring signa l is th e s ame as usu al.
During an internal cal l, the number of the caller’s handset is displayed.
You can set the tune of the ring signa l for internal and external calls yourself.
This makes it easier for you to rec ognize the ring signal of your own han dset.
For more information, please read “Ringer tones or melodie s ” on page 42.
Call back
The base station calls you back when you transfer an external call to another
handset without waiting for an answer but the third party does not respond
within 30 seconds.
You can select different ring signals when being called back by the base station. For more information, please read “Ringer ton es or m elo dies” on
page 42.
or Comm
f
MAKING AND RECEIVING AN INTERNAL CALL
To make an internal call, you use the
internal call, the num ber of the caller appear s in the left-hand side of the display. If the caller’s number is included in your han dset phone book, the corre -
Not
sponding name appea rs instead.
r
e
Com
Use
l
ia
c
unic
m
INT key on the handset. If you receive an
ons A
i
t
a
B
ricsson Mobile
Advanced telephoning 29
E
Loading...