Ericson Low Voltage Handlamps Catalog Page

94

Low Voltage Handlamps with In-Line Transformer

TEMPORARY LIGHTING

120 V olt AC

To

12 V olt AC

Low voltage hand lamps Vapor Proof Explosion Proof

with 25’ secondary cord 1924-12A 1926-12A
with 50’ secondary cord 1924-12B 1926-12B

Specifications:

P

rimary Voltage 120 V, 60Hz 120 V, 60Hz
Secondary Voltage 12 V 12 V
Maximum Wattage 100 watts 75 watts
Primary cord gauge & type #16/3 SOW #16/3 SOW
Primary cord length 10 ft. 10 ft.
Secondary cord gauge & type #14/3 SOW #14/3 SOW
Plug NEMA 5-15 NEMA 5-15

Notes: 1926 lamp assembly only is certified Class I & II, Div 1 & 2. Transformer is not hazardous location rated.

Consult factory for custom assemblies

Isolation Transformer

WEATHERPROOF COVER

GROUNDED SHIELD

SECONDARY (12 Vac 100VAMAX)

LOAD

(12 V LAMP)

NEUTRAL (WHITE)

120 VAC

60HZ

(GREEN)GROUND)

HOT (BLACK)

1924-12A

Notes: 1926 lamp assembly only is

certified Class I & II, Div 1 & 2.

Transformer is not hazar dous

location rated. Consult factory

for custom assemblies

FEATURES:

• Step-down transformers reduce 120 VAC line voltage

to12 V A C

• Extra-thick walled rubber housing with

non-corr

osive stainless steel hardware protects

transformer from jobsite contaminants

• Transformers inc orpor a te a grounded metal shield

between primar

y and secondary windings to ensure the
two voltages are isolated providing an added degree of
protection

• Each transformer is subjected to a factory dielectric test of

1600 volts betw

een primary and secondary windings and

between each winding and ground to ensure safety

• 1924 Series is vapor proof only

• Shock resistant

Made in
the USA

OSHA 1926.405(a)(2)(ii)(G): “Portable electric lighting used in wet and/or other conductive locations, as for example,

drums, tanks, and vessels, shall be operated at 12 volts or less. However, 120-volt lights may be used if protected by a
ground-fault circuit interrupter.