Ericson 900 Series Catalog Page

91
Industrial Fluorescent Handlamps- 900 Series
TEMPORARY LIGHTING
13 Watts 26 Watts
with 25 ft. cord - no switch 900-25 N/A with 50 ft. cord - no switch 900-50 N/A
without Cord - no switch 900-L0 926-L0
with 25 ft. cord and switch 900-25S 926-25
with 50 ft. cord and switch 900-50S 926-50
Specific
ations
Elec
trical Ratings 120 V, 60Hz 120 V, 60Hz
P
r
imary Cord Length see above see above
Ballast Location Handle Handle
Cable Gauge/Type (Base Units Only) #16/3 S00W #16/3 S00W
Molded on Plug NEMA 5-15 NEMA 5-15
Bulb Type F13DBX23T4/SPX41 F26DBX/SPX41
Initial Lumens 825 1710
Color Rendition Index (CRI)
(2)
82 82
Color T emperature (K)
(3)
4100 4100
Avg. Rated Bulb Life (Hours) 10000 10000
Low Temp Start 32 °F (0 °C) 10 °F (-12 °C)
Fixture Weight (w/ 25ft cable) 2.5 lb 1.87 lb
900 Series-Fluorescent Work Lights
Notes:
1.Consult factory for custom assemblies.
2.Based on a scale from 1 to 100 where 100 represents sunlight. The higher the number the more true the color appears (ie grey vs green).
3.Sunlight is simulated with a light that is about 5000 K. The higher the number the whiter the light.
4. LO models are not UL listed.
Magnet with Adjustable V elcro strap holds lamp securely for a hands free light source.
926-25
26 Watt
13 Watt
900-25
7MH001
Order separately
FEATURES:
cULus for wet locations
Cool, Glare -Free Light - Ideal for those applications where
hot glaring light can be a hazard.
Switch (optional) - Heavy duty rubber boot, push on/off
operation,
seals out water.
Field Serviceable - Field repairs are quick and convenient
with a wide-range of replacement parts.
Rubberized Handle - is non-conduc
tive, non-corrosive
and easy to grip.
Flex Strain Relief - Provides added protection for cord
at critical bending points.
Lightweight - Non-conductive construction with
high-impact lens.
Ballast - Enclosed in handle, so it’s easy to move
around the jobsite.
Molded plug mates with water tight connectors
16/3 SOOW
TPV end caps
Low voltage model av ailable
Made in the USA
Loading...