Page 1
50
6000 Series - Portable Outlet Boxes
FEATURES:
• Rugged and durable, these outlet boxes are
engineered to provide protection against electric
shock while using portable power cords
• Molded of thermoplastic elastomer (TPE) these
non-conductive boxes are crush proof and resistant
to jobsite oils
• High-visibility dual-color safety system for easy
identification on the jobsite
• Cover plates and clamps are molded of impact
resistant nylon and resistant to jobsite oils
• Built-in TPE cord entrance seals out dirt, dust and
other contaminants
• Accommodates wide range of devices
• Extra-deep box provides additional wiring space -
perfect for use with #12/3 cord and larger
• Available as pendant and feed-thr ough boxes
• Available with a wide range of co ver plates and a full
range of replacement parts
• Available with Ericson's in-line type GFCIs for added
protection and code compliance
6000
6002
Note: * No feed thru box available with cord clamp style
Cord Clamp*
Style Box
With Open
Covers
For (2) Duplex Receptacles
For (2) Single Receptacles:
1.390” dia. Hole
For (2) Single Receptacles:
1.572” dia. Hole
Standard Depth Extra Deep Standard Depth Extra Deep Standard Depth Extra Deep
Pendant 6000 6002 6005 6006 6010 6011
6000 Series Portable Outlet Boxes Selection Guide
Cord Grip
Feed Thru *
Style Box
With Open
Covers
For (2) Duplex Receptacles
For (2) Single Receptacles:
1.390” dia. Hole
For (2) Single Receptacles:
1.572” dia. Hole
Standard Depth Extra Deep Standard Depth Extra Deep Standard Depth Extra Deep
*Feed-Through 6000-F 6002-F 6005-F 6006-F 6010-F 6011-F
6000 Series Portable Outlet Boxes Selection Guide
NOTICE:
The NEC restricts the use of metal
job boxes as temporary power cords
Made in
the USA
TEMPORARY POWER
Notes:
Standard depth box= 3-3/16”
Extra deep box = 4-5/32”
* All 6000 Series feed-throughs have cord grip nuts and grommets (see photo of 6000-F above)
Loading...