ERICO ERIFLEX PROFILES Catalog Page
ERIFLEX S STEMY
R
ERIFLEX PROFILES
46
STEEL PROFILES
SYMMETRIC PROFILES
PROFILES CHARACTERISTICS
䡵
BICHROMATED GALVANISED STEEL
䡵
HIGH MECHANICAL RESISTANCE
䡵
HIGH CORROSION RESISTANCE
䡵
CONFORMS TO EN 50035, 50022, DIN 46277
PERFORATED C AND
L-SHAPED PROFILES
PROFILES
DR 5,5 2m
557700 10/10 10,5 5,5
22
15 0,33
DR 7 2m
557800 10/10 27 7,5 4 2 15 0,66
DR 7 3m
557810 10/10 27 7,5 4 3 10 0,99
DR 15 2m
557900 15/10 27 15 4 2 15 1,30
DR 15 3m
557910 15/10 27 15 4 3 10 1,95
DESCRIPTION
Part Thick- A B C Lg Unit
N° ness mm mm mm m
weight kg
ASYMMETRIC PROFILES
DRG 2m
558000 15/10 32 9
15 2
15 1,40
DRG 3m
558010 15/10 32 9 15 3 10 2,10
DESCRIPTION
Part Thick- A B C Lg Unit
N° ness mm mm mm m
weight kg
PCR 35 x 35 2m
557520 20/10 35 35 7 18 16 2 10 3
PCR 40 x 20 2m
557500 15/10 40 20 7 18 24 2 12 2,5
PCR 30 x 15 3m
557780 15/10 30 15 7 18 15 3 10 2,4
PCR 35 x 35 3m
557790 20/10 35 35 7 18 16 3 10 4,5
DESCRIPTION
Part Thick- A B D EFLg
Unit
N° ness
mm mm mm mm
m
weight kg
PLR 36,5 x 34 x 15 2m
557510 20/10 2 6 2,1
DESCRIPTION
Part Thick- Lg
Unit
N° ness m
weight kg
PERFORATED
ASYMMETRIC PROFILES
PDRG 2m
558050 15/10 32 9 15 7 18 2 15 1,30
PDRG 3m
558060 15/10 32 9 15 7 18 3 10 1,96
PERFORATED
SYMMETRIC PROFILES
PDR 5,5 2m
557750 10/10 10,5 5,5 2 7,8 12,2 2 15 0,28
PDR 7 2m
557850 10/10 27 7,5 4 7 18 2 15 0,62
PDR 7 3m
557860 10/10 27 7,5 4 7 18 3 10 0,92
PDR 15 2m
557950 15/10 27 15 4 7 18 2 15 1,20
PDR 15 3m
557960 15/10 27 15 4 7 18 3 10 1,81
DESCRIPTION
Part Thick- A B C D E Lg
Unit
N° ness
mm mm mm mm mm
m
weight kg
DESCRIPTION
Part Thick- A B C D E Lg
Unit
N° ness
mm mm mm mm mm
m
weight kg
䡲
PERFORATED L-SHAPED PROFILE
䡲
PERFORATED C-SHAPED
PROFILES
☞
☞
☞
R
ERIFLEX S STEMY
R
ERIFLEX PROFILES
ACCESSORIES AND TOOL FOR DIN PROFILES
47
PROFILES
DRCK 559140 1 18
DESCRIPTION
Part Unit
N° weight kg
쩸 The ERICO manual cutting & punching tool works with the 5 most
popular DIN rails.
쩹 Punching. The ERICO tool type DRCP will punch 9.5 mm x 6.5 mm
holes along or perpendicular to the axis of the rails.
쩺 The stops can be preset to allow direct punching of the oblong
holes : horizontal at 8 mm from the end or vertical at 12 mm from
the end.
쩻 The hinged cutting stop allows a series to be interrupted
without re-setting the stops.
쩼 Length of rules : DRCP tool, 1000 mm graduated, DRCPG
guide, 500 mm.
쩽 The DRCP tool also has the facility to cut M6 threaded rod.
쩾 The DRCPG kit is a guide designed to assist in cutting DIN
sections.
䡵 CUTTING TOOL FOR 5 DIN SECTIONS CUTS WITHOUT BURRS
OR DEFORMATION, ALLOWS PUNCHING OF ELONGATED
HOLES. SUPPLIED WITH RULE AND STOP
䡵 WITH KIT TO ASSIST WITH STRAIGHT CUTS
䡵 NEW : SLOT FOR C 30 x 15 PROFILE
CUTTING AND PUNCHING TOOL
FOR DIN PROFILES
☞
CLIP-NUTS
STEEL ANGLE BRACKET
SB 30 x 30
557770 30 30 28 25 0,06
SB 40 x 40
557720 40 40 28 25 0,07
BWS 30 x 30
560570 30 30 28 25 0,05
(without nut)
DESCRIPTION
Part A B C
Unit
N° mm mm mm
weight kg
DRGN M5 558070 M3 M5 100 0,038
DRGN M6 558080 M4 M6 100 0,038
DESCRIPTION
Part
Ø A Ø B
Unit
N°
weight kg
DR CLIP M4
563100 M4 10 0,01
DR CLIP M6
563110 M6 10 0,01
DESCRIPTION
Part
Ø M
Unit
N° weight kg
䡲
CLIP-NUTS FOR ASYMMETRIC DIN RAIL
ANGLE SUPPORT
BRACKET
IRS 5
557970 5 50 0,038
IRS 6
557980 6 50 0,038
DESCRIPTION
Part Ø Unit
N° mm weight kg
STRUTAL NUTS
䡲
Bichromated
galvanised steel
䡲
BICHROMATED and coated with zinc
SN M4
560500 100 0,02
SN M5
560510 100 0,02
SN M6
560520 100 0,02
SN M8
560530 100 0,02
DESCRIPTION
Part Unit
N° weight kg
OVERALL DIMENSIONS
Length : 165 mm
Width : 100 mm
Height : 200 mm
Lever : 630 mm
A : Punching mark
B : Cutting mark
SB 30 x 30
䡲
With pre-assembled M8 nuts
䡲
Thickness 2 mm
(bichromated galvanised steel)
SB 40 x 40
䡲
CLIP-NUTS FOR SYMMETRIC DIN RAIL
Possibility to lock the clips from sliding on
the DIN rail during tightening
DR CLIP M4
DRGN
R
Loading...