ERICO 510100 Data Sheet
TTCE Tubular Braid in Coil, Tinned Copper–TTCE3 (510100)
The primary use of tubular braid is to provide sensitive cables with an EMC/EMI screen to shield them against electromagnetic,
electrostatic and radio frequency interference. Optimum screening performance is obtained using copper wire braid that can also be
used for earth continuity purposes.
• For screening connecting cables between equipment used in an electromagnetically disturbed environment
• Supplied with draw wire
Part Number TTCE3
Article Number 510100
Finish Tinned
Material Copper
Nominal Current 13 A
Cross Section 1.7 mm²
Number of Wires 96
Wire Diameter 0.006"
Length 164'
Unit Weight 0.04 lb
Standard Packaging Quantity 50 m
UPC 78285657793
EAN-13 3479775101002
Part Number
TTCE3 0.12" 100% 0.24" 90%
TTCE5 0.20" 99% 0.39" 92%
TTCE8 0.31" 99% 0.63" 95%
TTCE8HL 0.31" 99% 0.63" 95%
TTCE10 0.39" 100% 0.79" 92%
TTCE15 0.59" 100% 1.18" 94%
TTCE20 0.79" 99% 1.57" 87%
TTCE25 0.98" 99% 1.97" 92%
TTCE30 1.18" 100% 2.36" 90%
TTCE35 1.38" 100% 2.76" 94%
Unit weight is per meter (3.28').
Coverage Efficiency
Diameter
Nom Coverage Max Coverage
Copyright © 2015ERICO International Corporation. All rights reserved.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
Loading...