Ergotron CRT Monitor User Manual

Ergonomic solutions for any area of your facility

Ergotron

®

CRT Monitor Arm
Mounting Solutions

870-03-018, rev. 05/13/04
www.ergotron.com
© 2004 Ergotron, Inc.

Orderguide

Ergotron is a registered trademark of Ergotron, Inc.
Reproduction of this material in whole or in part for any purpose
other than that authorized by Ergotron, Inc. is prohibited.

© 2004 Ergotron, Inc. All rights reserved.

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 3

Orderguide

CRT Monitor Arm Mounting Solutions

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Sample Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Monitor Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Fixed Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6" Suspension Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

10" Lift Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

12" Suspension Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

16" Suspension and Lift Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

N12 Arm for NEMA Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Extender Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Arm Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Monitor Caddies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Monitor Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Rotation Control Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Mounting Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Command Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Wall Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Wall Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Desk Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Keyboard Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Keyboard Holders, Trays and Arms . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Peripherals and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 19

CPU Holders, Shelves and Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . 19

Peripheral Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Security Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Footrests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Power Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Weight Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Hole Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Computer Carts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Other Keyboard/Laptop Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Ergonomics Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

C

RT Monitor Arms have the ability to swing, rotate, tilt and lift

monitors up to 100 lbs (45.4 kg). These arms offer a wide range
of vertical adjustment and horizontal extension capabilities, thus
accommodating individual user heights and positioning needs.

Ergotron’s Monitor Arms and Mounting Systems allow installation of
a complete computer workstation in tight and congested areas while
occupying little or no floor space. Several options are available.
Mount your system to a floor, ceiling, wall, machine, workbench, or
desktop using Command Posts, Wall Tracks, Wall Brackets or Desk
Mounts. A full range of accessories are available to configure a
fully-functional system that meets your specific needs.

Example of Monitor Arm Capabilities

200° of Side-to-Side
Rotation

Side-to-Side Rotation can be
controlled in 7.5° increments

360° of Monitor Swivel

0" to 16" (0 to 406 mm) Vertical Adjustment

20° of Monitor Tilt

Note: Ergotron also offers a wide variety of mounting systems specially designed for flat
panel monitors. For more information, see our Flat Panel Mounting Solutions Orderguide,
#870-03-005 on our website, www.ergotron.com.

Introduction

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 5

Product Line Overview

Monitor Arms Mounting Systems

Fixed
Arms

Suspend

6" Suspension

Arms

13" Horizontal

10" Lift

Arms

12" Suspension

Arms

Lift

19" Horizontal

Command
Posts

Wall
Tracks

Wall
Brackets

Desk
Mounts

Keyboard Solutions

Keyboard
Holders
& Trays

Wrist Rests &
Mouse Pads

Peripherals &

Accessories

CPU Holders
& Cabinets

16"

Arms

N12 Arms

for NEMA

environments

Extender

Arms

Lift

Suspend

Arm Components

Monitor
Caddies

Monitor
Platforms

Rotation
Control Kits

Worksurfaces

Footrests

Cable
Management

Security
Straps

Power
Strips

6 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

Configuration A

20-078-000 Command Post, 4" x 4" x 96" Post
60-138-000 Base for 4" x 4" Post
60-155-000 Bracket for Arm to 4" x 4" Post
97-095-099 Second Component Fastener Kit
44-316-000 30" Extender Arm
44-308-000 12" Suspension Arm (2)
40-004-000 Monitor Caddy, Type 3 (2)
75-055-009 Adjustable Keyboard Tray Holder (2)
77-050-000 Keyboard Tray w/ Sliding Mouse Tray (2)
85-033-000 Wrist Rest (2)
99-033-078 Mouse Pouch (2)
85-025-079 Mouse Pad (2)
80-061-000 Large Horizontal CPU Holder
60-159-000 Bracket for Peripheral to 4" x 4" Post
55-035-999 Peripheral Table
65-048-000 Fold-Away Underbracing for Peripheral Table
60-159-000 Bracket for Peripheral to 4" x 4" Post
85-023-000 Footrest
60-159-000 Bracket for Peripheral to 4" x 4" Post

Configuration C

20-075-000 Command Post, 3" x 3" x 48" Post
60-360-000 Base for 3" x 3" Post
60-154-000 Bracket for Arm to 3" x 3" Post
44-309-000 16" Suspension Arm
80-058-000 Medium Vertical CPU Holder
97-097-099 Second Component Fastener Kit
80-060-000 Medium Horizontal CPU Holder
60-158-000 Bracket for Peripheral to 3" x 3" Post
40-043-000 Monitor Caddy, Type 3T
75-055-009 Adjustable Keyboard Tray Holder
77-049-000 Keyboard Tray

Configuration B

20-078-000 Command Post, 4" x 4" x 96" Post
60-155-000 Bracket for Arm to 4" x 4" Post (2)
44-316-000 30" Extender Arm
44-309-000 16" Suspension Arm
40-043-000 Monitor Caddy, Type 3T
44-311-000 20" Fixed Arm without shroud
33-059-000 Monitor Platform
75-053-009 Adjustable Keyboard Holder

Attachment of Post to
machine by customer

Configure your own customized solutions with Ergotron’s modular components.
Here are some examples of common configurations.

Mounts to ceiling

Sample Configurations

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 7

Configuration E

31-018-182 Wall Track, 34"L
44-309-000 16" Suspension Arm
60-151-099 Bracket for Arm to Wall Track
40-004-000 Monitor Caddy, Type 3
75-055-009 Adjustable Keyboard Tray Holder
77-050-000 Keyboard Tray w/ Sliding Mouse Tray
85-010-087 Wrist Rest
99-033-078 Mouse Pouch
85-025-079 Mouse Pad
80-062-000 CPU Cabinet
60-156 Bracket for Peripheral to Wall Track

Configuration F

31-017-182 Wall Track, 26"L
44-307-000 16" Lift Arm
60-151-099 Bracket for Arm to Wall Track
33-004-000 Monitor Platform for 16" Lift Arm
75-055-009 Adjustable Keyboard Tray Holder
77-050-000 Keyboard Tray w/ Sliding Mouse Tray
85-010-087 Wrist Rest
99-033-078 Mouse Pouch
85-025-079 Mouse Pad

Configuration D

31-018-182 Wall Track, 34"L
44-314-000 18" Extender Arm
60-188-099 Bracket for Arm to Wall Track
44-303-000 6" x 13" “B” Suspension Arm
40-004-000 Monitor Caddy, Type 3
80-058-000 Medium Vertical CPU Holder
60-156 Bracket for Peripheral to Wall Track
55-035-999 Peripheral Table
65-048-000 Fold-Away Underbracing for Peripheral Table
60-156 Bracket for Peripheral to Wall Track

Configuration G

60-152-000 Wall Mounting Bracket
44-316-000 30" Extender Arm
44-309-000 16" Suspension Arm
40-004-000 Monitor Caddy, Type 3

Configuration H

33-269-000 Grommet Mount
44-343-000 10" Lift Arm
75-038 Articulating Keyboard Arm
77-026-098 Keyboard Tray w/ Sliding Mouse Tray
85-008-098 Wrist Rest for Articulating Arm
85-025-079 Mouse Pad

Configure your own customized solutions with Ergotron’s modular components.
Here are some examples of common configurations.

Sample Configurations

Monitor Arms

8 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

6" x 13" Suspension Arms

6" x 19" Suspension Arms

13.11

12.96

10.36

2.75

15.46

12.71

4.34

7.10

7.68

13.54

19.11

12.96

16.36

2.75

21.46

18.71

4.34

7.10

7.68

13.54

22.75

2.75

5.23
7

7.63

1.68

5.64

20.00

14.5

1.75

12.75

2.00

5.23

1.68

5.79

2.00

With Shroud

Without Shroud

Arm Components:

Monitor Caddies . . . .12

Monitor Platforms . . .12
Rotation Control Kit . .12

Mounting Systems:

Command Post . . . . .13

Wall Track . . . . . . . . .16

Wall Bracket . . . . . . .17

Fixed Arms swing, and rotate monitors to the point of need. Their tilt control extends a monitor’s
vertical viewing range. These arms can be used with a Monitor Caddy in a suspend mode, or turned
over and used with a Monitor Platform in a platform mode.

Part Description Horizontal Length Weight
Number (pivot point to pivot point) Capacity

44-311-000 20" Fixed Arm 20" 100 lbs

without Shroud (508 mm) (45.4 kg)

44-312-000 13" Fixed Arm 12-3/4" 100 lbs

without Shroud (324 mm) (45.4 kg)

44-313-000 20" Fixed Arm 20" 100 lbs

with Shroud (508 mm) (45.4 kg)

Side-to-Side Range: 200°
Monitor Tilt Adjustment: 20°
Monitor Swivel Adjustment: 360°

The 6-inch (152 mm) vertical range accommodates average male to female user heights (in either
standing or sitting positions). Extend your monitor out up to 13 inches or 19 inches. Swing, tilt, raise or
rotate your monitor.

Part Description Horizontal Length Weight
Number (pivot point to pivot point) Capacity

44-302-000 6" x 13" “A” 12-3/4" 15-35 lbs

Suspension Arm (324 mm) (6.8-15.9 kg)

44-303-000 6" x 13" “B” 12-3/4" 35-65 lbs

Suspension Arm (324 mm) (15.9-29.5 kg)

44-304-000 6" x 19" “A” 18-3/4" 15-35 lbs

Suspension Arm (476 mm) (6.8-15.9 kg)

44-305-000 6" x 19" “B” 18-3/4" 35-65 lbs

Suspension Arm (476 mm) (15.9-29.5 kg)

44-306-000 6" x 19" “C” 18-3/4" 65-100 lbs

Suspension Arm (476 mm) (29.5-45.4 kg)

Side-to-Side Range: 200°
Vertical Adjustment Range: 6" (152 mm)
Monitor Tilt Adjustment: 20°
Monitor Swivel Adjustment: 360°

Fixed Arms

6" Suspension Arms

Arm Components:

Monitor Caddies . . . .12

Rotation Control Kit . .12

Mounting Systems:

Command Post . . . . .13

Wall Track . . . . . . . . .16

Wall Bracket . . . . . . .17

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 9

16.5"

6.5"

17.75"

21.75"

16"

Desk Clamp

Grommet Mount Vertical Mount

Command Post Wall Track Wall Bracket

Figure: Vertical Mount Attachment for 10" Lift Arms

Use Vertical Mount #60-378-000 in tandem with Mounting Systems.

This versatile arm offers lift, swing and rotate capabilities. It adjusts 10 inches (254 mm) vertically.
Includes Monitor Platform and Quick-Release Tabs to secure the monitor in place. Mount to vertical
surfaces or to horizontal surfaces. If mounting to a horizontal surface, choose the Desk Clamp, which
attaches to an edge up to 3" (76 mm) thick, or the Grommet Mount, which attaches through a hole
3/8" to 3" (10 to 76 mm) wide and up to 4" (102 mm) thick.

Part Description Horizontal Length Weight
Number (pivot point to pivot point) Capacity

44-343-000 10" Lift Arm 16" 20-60 lbs

(406 mm) (9.1-27.2 kg)

60-257-000 Desk Clamp

33-269-000 Grommet Mount

60-378-000 Vertical Mount

(see figure below)

Note: If mounting to a vertical surface, Vertical Mount required. If mounting to horizontal surface, Desk Clamp or
Grommet Mount required. Order separately.

Side-to-Side Range: 360°
Vertical Adjustment Range: 10" (254 mm)
Monitor Swivel Adjustment: 360°

10" Lift Arm

Arm Components:

Monitor Platform
included with Arm

Mounting Systems:

Command Post . . . . .13

Wall Track . . . . . . . . .16

Wall Bracket . . . . . . .17

Desk Mounts . . . . . .17

22.72

2.75

4.34

25.47

21.40

7.72

19.95

17.65

Twelve inches (305 mm) of vertical adjustment provides limited sit-to-stand user adjustability. Extend a
monitor out up to 22 inches (559 mm). Raise, swing, tilt and rotate your monitor.

Part Description Horizontal Length Weight
Number (pivot point to pivot point) Capacity

44-308-000 12" Suspension Arm 22-3/4" 25-100 lbs

without Shroud (578 mm) (11.4-45.4 kg)

Side-to-Side Range: 200°
Vertical Adjustment Range: 12" (305 mm)
Monitor Tilt Adjustment: 20°
Monitor Swivel Adjustment: 360°

12" Suspension Arm

Arm Components:

Monitor Caddies . . . .12

Rotation Control Kit . .12

Mounting Systems:

Command Post . . . . .13

Wall Track . . . . . . . . .16

Wall Bracket . . . . . . .17

Monitor Arms

10 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

16" Lift Arm

16" Suspension Arm

9.17

4.6

9.25

2.0

6.41

21.69

24.76

10.71

20.25

14.80

18.03

21.10

22.28

25.35

8.91

6.41

20.50

22.283.07

25.35

18.23

21.30

21.69

24.76

4.06

1.50

21.08

Monitor Arms

Sixteen inches (406 mm) of vertical movement provides true ergonomic adjustability in sitting or
standing applications. It even accommodates the average sit-to-stand height-range. This arm features
clean styling and built-in cable management. It’s available as a suspension arm (use with Caddy) or a
lift arm (use with Platform). Raise, swing, tilt or rotate your monitor.

Part Description Horizontal Length Weight
Number (pivot point to pivot point) Capacity

44-309-000 16" Suspension Arm 22-1/4" 25-100 lbs

without Shroud (565 mm) (11.4-45.4 kg)

44-307-000 16" Lift Arm 22-1/4" 25-100 lbs

(565 mm) (11.4-45.4 kg)

Side-to-Side Range: 200°
Vertical Adjustment Range: 16" (406 mm)
Monitor Tilt Adjustment: 20°
Monitor Swivel Adjustment: 360°

16" Suspension and
Lift Arms

Arm Components:

Monitor Caddies . . . .12

Monitor Platforms . . .12
Rotation Control Kit . .12

Mounting Systems:

Command Post . . . . .13

Wall Track . . . . . . . . .16

Wall Bracket . . . . . . .17

16" Lift Arm

16" Suspension Arm

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 11

12.00

7.70

2.69 2.75

18.00

24.00

30.00

7.70

7.70

2.69

2.69

7.70

2.69 2.75

2.75

2.75

Multiple rotation
points give greater
range for positioning

Top View

21.69"

24.76"

21.30"

18.23"

25.35"

22.28"

8.88"

7.10"

6.41"

3.07"

20.06"

A monitor arm attaches to an
Extender Arm, which connects to
Command Post or Wall Track via
a bracket. Wall Bracket requires
no extra bracket

Command Post
Wall Track
Wall Bracket

Monitor Arms

The N12 Suspension Arm meets UL requirements for the NEMA standard, allowing you to mount
enclosures in NEMA 12 environments. Features include 16 inches (406 mm) of vertical adjustment and
hassle-free cable management. An integrated quick-connect tube offers an industry proven universal
connection interface while allowing continuous isolation of cables.

Part Description Horizontal Length Weight
Number (pivot point to pivot point) Capacity

44-360-000 N12 Suspension Arm 22-1/4" 25-100 lbs

for NEMA environments (565 mm) (11.4-45.4 kg)

97-179-098 Cable Routing Tube for N12

Suspension Arm, 1 foot (305 mm),
black, (order in 1-foot increments, minimum 5 feet)

Note: Monitor enclosure not included with N12 Suspension Arm.
Note: Cable Routing Tube for N12 Suspension Arm ordered separately.

Side-to-Side Range: 200°
Vertical Adjustment Range: 16" (406 mm)
Monitor Tilt Adjustment: 20°
Monitor Swivel Adjustment: 360°

N12 Arm for NEMA
Environments

Arm Components:

Rotation Control Kit . .12
Compatible with 3rd­party monitor enclosures

Mounting Systems:

Command Post . . . . .13

Wall Track . . . . . . . . .16

Wall Bracket . . . . . . .17

Extender Arms can be used in conjunction with all vertical-mount monitor arms, providing additional
placement capabilities. Dual arm adjustability allows monitor positioning at multiple points of use.

Part Description Horizontal Length Weight
Number (pivot point to pivot point) Capacity

44-362-000 12" Extender Arm 12" see table on

(305 mm) pg. 22

44-314-000 18" Extender Arm 18" see table on

(457 mm) pg. 22

44-315-000 24" Extender Arm 24" see table on

(610 mm) pg. 22

44-316-000 30" Extender Arm 30" see table on

(762 mm) pg. 22

Note: When mounting to Command Post, use with 4" x 4" Post only.
Note: Refer to page 22 for detailed information regarding weight capacities.

Side-to-Side Range: 200°

Extender Arms

12", 18", 24", 30"

Arm Components:

Rotation Control Kit . .12

Mounting Systems:

Command Post . . . . .13

Wall Track . . . . . . . . .16

Wall Bracket . . . . . . .17

Cable Channel
included

12 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

97-053-002

Arm Components

Monitor Caddies are used in conjunction with Suspension and Fixed Arms. A monitor is securely
cradled within the Caddy. Choose a Caddy appropriate to your monitor’s size.The Caddy’s telescoping
frame further adjusts to an individual monitor’s height.

Part Description Height Monitor Monitor Weight
Number Adjustment Depth* Width* Capacity*

40-002-000 Type 2 12"–15-1/2" 16-1/2" — 40 lbs

Monitor Caddy (305–394 mm) (419 mm) (18.2 kg)

40-004-000 Type 3 13-1/2"–18-1/2" 19" — 65 lbs

Monitor Caddy (343–470 mm) (483 mm) (29.5 kg)

40-043-000 Type 3T 13"–18-1/2" — 13-7/8"** 70 lbs

Monitor Caddy (330–470 mm) (352 mm) (31.8 kg)

40-008-000 Type 4 16-1/2"–22" 22" — 70 lbs

Monitor Caddy (419–559 mm) (559 mm) (31.8 kg)

40-013-000 Type 5 16-1/2"–22" — 16-1/4"*** 120 lbs

Monitor Caddy (419–559 mm) (413 mm) (54.5 kg)

* Monitor depth, width and weight specifications are listed as maximum measurements.
** For wide-backed monitors; maximum rear monitor width is 13-7/8" (352 mm), measured 13" (330 mm) from front

of monitor.

***For wide-backed monitors; maximum rear monitor width is 16-1/4" (413 mm), measured 15" (381 mm) from front

of monitor.

Monitor Caddies

Monitor Platforms are used with 16" Lift and Fixed Arms. Straps are included to secure the monitor in
place—order polyurethane for easy cleaning. Part number 33-004-000 features a bottom-mounted
handle that is specially suited to the 16" Lift Arm.

Part Description Dimensions
Number

33-004-000 Platform w/ polyurethane 14" x 14"

straps for 16" Lift Arm (356 x 356 mm)

33-056-000 Platform w/ polyurethane 14" x 14"

straps for Fixed Arms (356 x 356 mm)

33-059-000 Platform w/ nylon straps 14" x 14"

for Fixed Arms (356 x 356 mm)

Monitor Platforms

33-004-000 Platform for Lift Arm
(includes bottom handle)

33-056-000 Platform for Fixed Arms
(includes front handle)

The optional Rotation Control Kit limits the rotation of a monitor arm. This allows the setting of a
specific rotation range according to your application. Rotation in both directions is set in 7.5°
increments using a standard 5/32" Allen wrench.

Part Description Adjustment
Number Increments

97-053-002 Arm Rotation Control Kit 7.5° increments

Rotation Control Kit

Type 2

Type 5

Type 3T

16"

16.375"

14"

13.75"

12"

16.50"–22"

13" –18.5"

12"–15.5"

Type 4

16"

16.50"–22"

19"

14.75"

Type 3

12"

13.5"–18.5"

17.5"

13"

13.75"

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 13

Post P/N H x W x D Base / Mounting Kit (page 14) Floor / Ceiling Mount Machine / Bench Mount

20-143-000 74" x 2" x 2" 97-012-000 Not recommended* Arm w/out Ext

20-075-000 48" x 3" x 3" 60-360-000 or 97-011-000 Arm w/out Ext Arm w/out Ext

20-076-000 80" x 3" x 3" 60-360-000 or 97-011-000 Arm w/out Ext Arm w/out Ext

20-077-000 96" x 3" x 3" 60-360-000 or 97-011-000 Arm w/out Ext Arm w/out Ext

20-078-000** 96" x 4" x 4" 60-138-000** Arm(s) with Ext(s) Arm(s) with Ext(s)***

Arm = Suspension, Lift or Fixed Arm for CRT monitor (pages 8–11)
Ext = Extender Arm (page 11)

* The 2" x 2" Post should not be mounted to floor or ceiling in applications using CRT Monitor Arms.
** When mounting 4" x 4" Post to machine or bench, fasteners to be supplied by customer.
*** 4" x 4" Post should be employed in applications using Extender Arms, multiple arms, and/or with heavy loads.

Monitor Caddy

Suspension Arm

Bracket for mounting
arm and peripheral
to post

Top View

Multiple arms and
extenders can be mounted
to Command Post***

Keyboard Holder
and Tray

CPU Holder

Base

Command Post
configuration example

Mounting Systems

The Command Post uses little or no floor space. Attach to the floor, suspend from the ceiling, or
clamp to a machine or workbench (choose appropriate mounting hardware from the table below).
It provides one standard interface that will mount multiple components. Choose a length of post that
accommodates your monitor requirements and the size/number of components you wish to mount.
Brackets are required to mount arms and peripherals to post unless noted otherwise (pgs. 14 & 15).

Part Description Dimensions
Number H x W x D

20-143-000* Post, 2" x 2" x 74" 74" x 2" x 2"

11-gauge steel wall (1880 x 51 x 51 mm)

20-075-000 Post, 3" x 3" x 48" 48" x 3" x 3"

11-gauge steel wall (1219 x 76 x 76 mm)

20-076-000 Post, 3" x 3" x 80" 80" x 3" x 3"

11-gauge steel wall (2032 x 76 x 76 mm)

20-077-000 Post, 3" x 3" x 96" 96" x 3" x 3"

11-gauge steel wall (2438 x 76 x 76 mm)

20-078-000** Post, 4" x 4" x 96" 96" x 4" x 4"

3/16-gauge steel wall (2438 x 102 x 102 mm)

Note: Posts have cable routing access holes to allow cables to pass through them.
Note: Other post lengths can be ordered on a custom basis. Contact your sales representative for more information.
Note: See Mounting Options and Uses Table below to determine which post, base/mounting kit and arm(s) to choose.

Command Posts

Command Post Mounting Options Table

14 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

Base for
Command Post

90-018, Hardware Kit for Base for
attaching base to concrete surface

Mounting Kit for attaching
post to vertical surface

Base upside down for
ceiling application

Base shown in floor
mount application

Customer provided threaded rod used to
anchor Base above or below a false ceiling

Base can be
mounted at any
height on Post

4" x 4" Post

Extender Arm

60-155-000

Caution: Surface construction varies and the
ultimate mounting method you use to attach an
Ergotron mounting system is out of Ergotron’s
control. It is important to consult with the
appropriate local engineering, architectural, or
construction personnel to ensure that an Ergotron
mounting system is mounted properly to handle
applied loads.

Mounting Systems

Select the appropriate Base for your post when mounting to floor or ceiling.

Part Description Dimensions Compatible with
Number H x W x D Post(s)…

60-360-000 Base, for 7" x 17" x 17" 20-075-000, 20-076-000

3" x 3" Post (178 x 432 x 432 mm) 20-077-000

60-138-000 Base, for 8" x 18" x 18" 20-078-000

4" x 4" Post (203 x 457 x 457 mm)

90-018 Hardware Kit for Base 3/8" dia. x 3-3/4" long

(4) concrete stud anchors (9.5 x 95 mm)

Note: Mounting 2" x 2" Post to floor or ceiling is not recommended in applications using CRT Monitor Arms.
Note: Order the Hardware Kit for Base when attaching to a concrete surface.

Bases for
Command Posts

Select the appropriate Mounting Kit when mounting your post to a vertical surface, like a machine
or workbench.

Part Description Compatible with
Number Post(s)…

97-012-000 Mounting Kit, for 20-143-000

2" x 2" Post

97-011-000 Mounting Kit, for 20-075-000, 20-076-000

3" x 3" Post 20-077-000

Note: If mounting 4" x 4" Post to a vertical surface, fasteners to be supplied by customer.

Mounting Kits for
Command Posts

Brackets are required for mounting monitor arms to posts. All vertical-mount arms are compatible with
these brackets. Order brackets according to post size.

Part Description Dimensions Arm Mounting
Number W x H Hardware included…

60-153-000 Bracket for Arm, 4-5/8" x 6-1/2" (4) 3/8"–16 x 3/4"

2" x 2" Post (117 x 165 mm) flat socket head

60-154-000 Bracket for Arm, 5-3/4" x 5-3/8" (4) 3/8"–16 x 3/4"

3" x 3" Post (146 x 137 mm) flat socket head

60-155-000 Bracket for Arm, 6-7/8" x 6-3/8" (6) 3/8"–16 x 3/4"

4" x 4" Post (175 x 162 mm) flat socket head

Brackets for Mounting
Monitor Arms to
Command Posts

Multiple arms, extenders or
components can be mounted to
Command Post by stacking and
offsetting brackets

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 15

97-097-099

CPU Holder

Suspension Arm

Bracket for
Arm to Post

Install peripherals at any
height on post

CPU Holder

Bracket for
Peripheral to
Post

Example of multiple
Extender Arms mounted
using 97-096-099

Example of multiple Suspension
Arms mounted using 97-095-099

Example of CPU
Holder mounted
using 97-097-099

Mounting Systems

Mount a second component to the 3" x 3" or 4" x 4" Post Brackets by ordering one of these
Fastener Kits.

Part Description
Number

97-095-099 Fastener Kit, Suspension, Lift or Fixed Arm

97-096-099 Fastener Kit, Extender Arm

97-097-099 Fastener Kit, CPU Holder

Note: When mounting Extender Arm or multiple monitor arms to Command Post, use 4" x 4" Post only.

Second Component
Fastener Kits for
Command Posts

Peripherals require a bracket (unless noted otherwise) for mounting to a Command Post. Order
brackets according to the post size to which you are mounting.

Part Description
Number

60-157-000 Bracket for Peripheral, 2" x 2" Post

60-158-000 Bracket for Peripheral, 3" x 3" Post

60-159-000 Bracket for Peripheral, 4" x 4" Post

Note: See the selection of available peripherals on pages 19–21.
Note: If you plan to mount a monitor arm and peripheral on the same bracket, order Bracket for Arm to Post (previous

page) and Fastener Kit #97-097-099 (above).

Brackets for Mounting
Peripherals to
Command Posts

16 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

60-156

Wall Track

60-151-099,
Bracket for
Arm to Wall
Tr ac k

60-151-099

60-188-099

Suspension Arm

Mounting Systems

The Wall Track mounting system is a flexible, low-cost mounting method that occupies zero floor space.
This system attaches to most vertical surfaces – such as walls, pillars, and machines – and provides
one standard interface that will mount multiple Ergotron components anywhere along its length.
Choose a length of Wall Track that will accommodate the size and number of components you
wish to mount.

Part Description Dimensions
Number H x W

31-016-182 10" Wall Track 10" x 5"

(254 x 127 mm)

31-017-182 26" Wall Track 26" x 5"

(660 x 127 mm)

31-018-182 34" Wall Track 34" x 5"

(864 x 127 mm)

31-019-182 50" Wall Track 50" x 5"

(1270 x 127 mm)

Wall Track Mounting Kits Application…

90-010 Wall Track Mounting Kit (10) Phillips Sheet metal or

self-tapping 14 x 1.5 LG screw wood studs

90-011 Wall Track Mounting Kit (10) Phillips Hollow walls

1/4"-20 x 1.5 LG screw/toggle anchor

Track Mount Bracket Kits Mounting Screws

60-151-099 Bracket for Suspension, Lift, (4) 3/8"-16 x .75"

Fixed Arm to Wall Track hex head screws

60-188-099 Bracket for Extender Arm (4) 3/8"-16 x .75"

to Wall Track hex head screws

60-156 Bracket for Peripheral (4) 3/8"-16 x .63"

to Wall Track button head screws

Note: See the selection of available peripherals on pages 19–21.

Wall Tracks

Caution: Surface construction varies and the
ultimate mounting method you use to attach an
Ergotron mounting system is out of Ergotron’s
control. It is important to consult with the
appropriate local engineering, architectural, or
construction personnel to ensure that an Ergotron
mounting system is mounted properly to handle
applied loads.

Wall Track
configuration
example

Monitor Caddy

Suspension Arm

Keyboard Holder
and Tray

CPU Cabinet

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 17

Extender Arm

Fasteners that attach
bracket to wall not
included

Wall Bracket

Desk Clamp

Grommet Mount

Mounting Systems

The Wall Bracket allows mounting of any monitor arm directly to a wall or solid structure, like a
machine or pillar. This economical solution adds the extra support you need.

Part Description Dimensions Arm Fasteners
Number W x H

60-152-000 Wall Mounting Bracket 6-5/8" x 8" (6) 3/8"-16 x 3/4"

with arm fasteners (168 x 203 mm) carriage bolt

Note: Fasteners that attach Wall Bracket to wall are not supplied by Ergotron.

Wall Bracket

Caution: Surface construction varies and the
ultimate mounting method you use to attach an
Ergotron mounting system is out of Ergotron’s
control. It is important to consult with the
appropriate local engineering, architectural, or
construction personnel to ensure that an Ergotron
mounting system is mounted properly to handle
applied loads.

Desk Mounts allow direct attachment of a monitor arm to a horizontal surface, like a tabletop or desk.
They are compatible only with the 10" Lift Arm.

Part Description Attaches to…
Number

60-257-100 Desk Clamp Horizontal surface at edge ≤ 3" (76 mm) thick

33-269-000 Grommet Mount Horizontal surface through hole 3/8" to 3"

(10 to 76 mm) wide, up to 4" (102 mm) thick

Desk Mounts

Desk Mount
configuration
example

Desk Clamp

10" Lift Arm

Keyboard Holder

18 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

85-033-000
Wrist Rest

85-025-079
Mouse Pad

99-033-078
Mouse Pouch

77-076-000

77-049-000

77-050-000

85-014-000

Articulating Keyboard Arm, Keyboard Tray w/
Sliding Mouse Tray, and Wrist Rest

Note: See page 25 for information regarding other
keyboard mounts.

75-054-009

75-055-009

75-052-009

75-053-009

Keyboard Solutions

Wire Keyboard Holders: Store your keyboard out of the way, then pull it out when needed. Tilt up or
down in 15˚ increments. Keyboard Holders mount under Caddies and Platforms.

Part Description Dimensions Weight
Number W x D x H Capacity

75-052-009 Wire Keyboard Holder 12-7/8" x 23-1/2" x 4-1/2" 15 lbs

2" drop, pull-out (327 x 597 x 114 mm) (6.8 kg)

75-053-009 Wire Keyboard Holder 12-7/8" x 23-1/2" x 6-1/2" 15 lbs

4" drop, pull-out (327 x 597 x 165 mm) (6.8 kg)

75-064-009 Wire Keyboard Holder 12-7/8" x 23-1/2" x 4-1/2" 15 lbs

2" drop, pull-out (327 x 597 x 114 mm) (6.8 kg)
(10" Lift Arm only)

75-065-009 Wire Keyboard Holder 12-7/8" x 23-1/2" x 6-1/2" 15 lbs

4" drop, pull-out (327 x 597 x 165 mm) (6.8 kg)
(10" Lift Arm only)

Adjustable Keyboard Tray Holders: Store your keyboard out of the way, then pull it out when needed.
Tilt up or down in 15˚ increments. Keyboard Holders mount under Caddies and Platforms. Use with
separately ordered Keyboard/Mouse Trays (see below).

75-054-009 Adj. Keyboard Tray Holder 12-7/8" x 18-3/8" x 4" 15 lbs

2.5" drop, pull-out (327 x 467 x 102 mm) (6.8 kg)

75-055-009 Adj. Keyboard Tray Holder 12-7/8" x 18-3/8" x 7-1/2" 15 lbs

5" drop, pull-out (327 x 467 x 191 mm) (6.8 kg)

Keyboard/Mouse Trays Accessories: Use with the Adjustable Keyboard Tray Holders (see above).

Use with…

77-001-000 Steel Keyboard/Mouse Tray 26" x 8-1/4" 75-052, 75-053

(660 x 210 mm) 75-064 or 75-065

77-049-000 Keyboard Tray 16-1/2" x 7-1/4" x 2" 75-054-009 or

(419 x 184 x 51 mm) 75-055-009

77-050-000 Keyboard Tray w/ Sliding 17-1/2" x 9 to 12" x 2-1/2" 75-054-009 or

Mouse Tray & Wrist Rest (445 x 229 to 305 x 64 mm) 75-055-009
Holder

77-076-000 Keyboard Tray w/ Handle 17-1/2" x 12-1/2" x 3-3/8" 75-054-009 or

and Sliding Mouse Tray (445 x 318 x 86 mm) 75-055-009

85-014-000 Front Mouse Tray 7-1/4" x 7-1/8" x 1" 77-049-000

(184 x 181 x 25 mm)

85-024-000* Sliding Mouse Tray and 77-049-000

Wrist Rest Holder

85-033 Wrist Rest, black 19" x 3" (483 x 76 mm)

85-010-087 Wrist Rest, grey, 19" x 3"

premium, easy-clean (483 x 76 mm)

85-025-079 Mouse Pad 7" x 7" (178 x 178 mm)

99-033-078 Mouse Pouch, grey

* 85-024-000 converts 77-049-000 into 77-050-000.

Articulating Keyboard Arms & Tray: Mount this arm under almost any worksurface or desktop.

Features wide-ranging adjustment: slide forward and back, move up and down 6 inches, rotate 360°,
tilt tray to fore and aft. Very smooth motion and durable construction. Color is black.

75-038 Articulating Keyboard Arm L = 16-7/8" (427 mm) – stored position

77-026-098 Keyboard Tray with Sliding 21" x 10-1/2" x 1-1/2"

Mouse Tray (533 x 267 x 38 mm)

85-008-098 Wrist Rest for 19-1/2" x 2"

Articulating Arm (495 x 51 mm)

85-016-087 Wrist Rest for Art. Arm, 19-1/2" x 2"

grey, premium, easy-clean (495 x 51 mm)

Keyboard Holders,
Trays & Arms

85-024-000

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 19

80-063-000
Small CPU Holder

80-058-000
Medium CPU Holder

80-059-000
Large CPU Holder

80-060-000
Medium CPU
Shelf

80-061-000 Large
CPU Shelf

Bracket is required when
mounting holder to Command
Post or Wall Track

CPU Cabinet in horizontal position
with back cover removed

Peripherals and Accessories

CPU Holders: Mount CPUs in a vertical, tower position. Each holder’s width is adjustable.Three sizes
are available to accommodate equipment 1-3/8" to 10-3/4" wide. Mount to Command Post, Wall Track,
or directly to a vertical surface.

Part Description Dimensions Weight
Number H x W x D (D = Adjustment Range) Capacity

80-063-000 CPU Holder, 6" x 10" x 1-3/8–3-3/4" 50 lbs

Small (152 x 254 x 35–95 mm) (22.7 kg)

80-058-000 CPU Holder, 6-1/2" x 10" x 3-3/8–7-5/8" 100 lbs

Medium (165 x 254 x 86–194 mm) (45.4 kg)

80-059-000 CPU Holder, 14-5/8" x 12" x 5–10-3/4" 150 lbs

Large (371 x 305 x 127–273 mm) (68.1 kg)

Note: When mounting to a Command Post or Wall Track, bracket is required. See pages 15–16.
Note: When mounting directly to surface, fasteners are supplied by user.

CPU Shelves: CPU Shelves are available in two sizes. They provide greater surface area to place

equipment. Mount to Command Post, Wall Track, or directly to a vertical surface. Cables are routed
through a back opening.

80-060-000 CPU Shelf, 17" x 17" x 5" 100 lbs

Medium (432 x 432 x 127 mm) (45.4 kg)

80-061-000* CPU Shelf, 22" x 20" x 7-1/2" 150 lbs

Large (559 x 508 x 191 mm) (68.1 kg)

* Do not use CPU Shelf, Large (80-061-000) with the 2" x 2" Command Post (20-143-000).

Note: When mounting to a Command Post or Wall Track, bracket is required. See pages 15–16.
Note: When mounting directly to surface, fasteners are supplied by user.

CPU Cabinet: Ergotron’s CPU Cabinet provides a secure enclosure to mount and protect equipment

up to 18-3/8" wide. It secures with a lockable, hinged front panel and lockable, removable back panel.
The bottom and back are vented. Cables pass through routing holes in the bottom.

80-062-000 CPU Cabinet 18-3/8" x 21" x 8" 125 lbs

(467 x 533 x 203 mm) (56.7 kg)

65-029-000 Fixed Underbracing for horizontal mounting to

3" x 3" Command Post

65-088-000 Fixed Underbracing for horizontal mounting to

4" x 4" Command Post

65-059-000 Fixed Underbracing for horizontal mounting to

Wall Track

Note: To mount CPU Cabinet vertically on Command Post or Wall Track, bracket is required. See pages 15–16.
Note: To mount CPU Cabinet horizontally on Command Post or Wall Track, order appropriate Fixed Underbracing

above. No extra bracket is required.

80-062-000 CPU
Cabinet

CPU Holders, Shelves
and Cabinets

Ergolock Kits are used to further secure equipment. Depending on your application, choose from either
the Strap with Buckle Kits or the Locking Strap with Fastener Kits.

Part Description Includes… Weight
Number Capacity

97-063 Ergolock Strap and 8-foot Strap (2) w/ Buckles

Buckle Kit

97-068 Ergolock PC Kit 4" Strap (4) w/ Fasteners/Leash

97-069 Ergolock Strap and 4" Strap (2) w/ Fasteners 50 lbs

Fastener Kit (22.7 kg)

97-070 Ergolock Strap and 4" Strap (2) w/ Fasteners 100 lbs

Fastener Kit (45.4 kg)

97-071 Ergolock Strap and 5" Strap (2) w/ Fasteners 200 lbs

Fastener Kit (90.8 kg)

97-072 Fasteners (4) 100 lbs (each)

(45.4 kg)

97-073 48" Roll of Strap

97-074 Ergolock Lift-off Tool

w/ replacement adhesive pads

20 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

55-035-999 Peripheral Table
with laminated worksurface

65-048-000 Fold­Away Underbracing

65-029-000 Fixed
Underbracing for
3" x 3" Post

Fold-Away Underbracing and Peripheral
Table shown in up position (above) and
down position (below)

97-068, Ergolock PC Kit

97-074, Ergolock
Lift-off Tool

97-072, Fasteners

97-073 48" roll of
locking Strap

Locking Strap

Fastener

Locking
Strap

Buckle

97-069, 4” Straps
w/ Fasteners

Peripherals and Accessories

The Peripheral Table provides a solid, laminated surface for writing or holding equipment. Comes in
Grey Millstone finish. Configure it with either a Fixed or Fold-Away Underbracing. Mount to Command
Post, Wall Track, or directly to a vertical surface.

Part Description Dimensions
Number W x D x H

55-035-999 Peripheral Table, 20" x 18" x 3/4"

laminated (508 x 457 x 19 mm)

65-048-000 Fold-Away Underbracing

65-029-000 Fixed Underbracing for horizontal mounting to

3" x 3" Command Post

65-088-000 Fixed Underbracing for horizontal mounting to

4" x 4" Command Post

65-059-000 Fixed Underbracing for horizontal mounting to

Wall Track

Note: When mounting directly to surface, fasteners are supplied by user.
Note: To mount Fold-Away Underbracing to Command Post or Wall Track, bracket is required. See pages 15–16.
Note: No extra bracket is required for Fixed Underbracing.

Peripheral Table

Security Straps

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 21

X

X

X

X

X

X

X

X

X

X

X

X

x

x

x

x

x

x

X

X

X

X

X

X

X

X

X

X

X

X

x

x

x

x

x

x

97-020 Cable
Management
Routing Kit

Cable Management
Channel

97-041, Kit includes fasteners
and 12-foot flexible tube

83-002, Power Strip

83-006, Surge Suppressor

Cable Routing Tubes: The Cable Routing Tube Kit encloses equipment cables in 1-inch diameter
flexible tubing. The 12-foot length can be cut down to any size that is required by your application. The
N12 Suspension Arm employs a tubing system that conceals and routes cables in NEMA 12
environments – order 97-179-098 when configuring an Ergotron NEMA Arm.

Part Description Length
Number

97-041 Cable Routing Tube 12 feet (3.7 m)

Kit, grey

97-179-098 Cable Routing Tube for 1 foot (305 mm)

N12 Arm, black, (order in 1'
increments, minimum 5')

Cable Channels: Cable Channels are rigid plastic tubing that can be mounted to provide additional
cable management. To use the Channels, simply open, route your cables, then snap the Channel
closed. They may be attached by using the supplied tape or screws.

Dimensions (L x W x D)

70-038-089 12" Cable Management 12" x 1-5/8" x 1"

Channel, grey (305 x 41 x 25 mm)

70-008-089 24" Cable Management 24" x 1-5/8" x 1"

Channel, grey (610 x 41 x 25 mm)

70-011-089 32" Cable Management 32" x 1-5/8" x 1"

Channel, grey (813 x 41 x 25 mm)

70-017-089 12" Cable Management 12" x 1-5/8" x 1"

Channel, set of 6, grey (305 x 41 x 25 mm)

Cable Channel Accessories: The Cable Management Routing Kit includes ties and clips that provide
additional control and organization of cables.

97-020 Cable Management

Routing Kit

Cable Management

Peripherals and Accessories

Install the Footrest on the Command Post or directly to a vertical surface to provide more ergonomic
comfort to the user.

Part Description Dimensions Weight
Number W x D Capacity

85-023-000 Footrest 19" x 9-1/2" 200 lbs

(483 x 241 mm) (90.8 kg)

Note: To mount Footrest to Command Post, bracket is required. See page 15.

Footrest

The Surge Suppressor offers protection against spikes and surges with one-nanosecond response
time. The Power Strip is an economical way to provide extra outlets. Both feature sturdy aluminum
housing and a 15-foot cord.

Part Description
Number

83-006 Surge Suppressor with

6 outlets (15 AMP)

83-002 Power Strip with

6 outlets (15 AMP)

Power Strips

22 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

Appendix

Fixed Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 lbs (45.4 kg)

6" Suspension Arms

6" x 13" “A” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15–35 lbs (6.8–15.9 kg)

6" x 13" “B” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35–65 lbs (15.9–29.5 kg)

6" x 19" “A” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15–35 lbs (6.8–15.9 kg)

6" x 19" “B” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35–65 lbs (15.9–29.5 kg)

6" x 19" “C” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65–100 lbs (29.5–45.4 kg)

10" Lift Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20–60 lbs (9.1–27.2 kg)

12" Suspension Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–100 lbs (11.4–45.4 kg)

16" Lift & Suspension Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–100 lbs (11.4–45.4 kg)

N12 Suspension Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–100 lbs (11.4–45.4 kg)

Extender Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Varies by arm, see table

Keyboard Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 lbs (6.8 kg)

CPU Holders

Vertical, Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 lbs (22.7 kg)

Vertical, Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 lbs (45.4 kg)

Vertical, Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 lbs (68.1 kg)

Horizontal, Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 lbs (45.4 kg)

Horizontal, Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 lbs (68.1 kg)

CPU Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 lbs (56.7 kg)

Footrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 lbs (90.8 kg)

Peripheral Table, Fold-Away Underbracing . . . . . . . . . . . . . . . . . . . . . . . . . 50 lbs (22.7 kg)

Peripheral Table, Fixed Underbracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 lbs (45.4 kg)

Weight Capacity

Weight Capacity of

Extender Arms

Extender

Arm Length

12"

18"

24"

30"

Suspension

Arm Model

6"V x 13"L

6"V x 19"L

10" Lift

12"V

16" Lift & Susp.

N12

6"V x 13"L

6"V x 19"L

10" Lift

12"V

16" Lift & Susp.

N12

6"V x 13"L

6"V x 19"L

10" Lift

12"V

16" Lift & Susp.

N12

6"V x 13"L

6"V x 19"L

10" Lift

12"V

16" Lift & Susp.

N12

Wall Track

Capacity

65 lbs (29.5 kg)

80 lbs (36.3 kg)

60 lbs (27.2 kg)

75 lbs (34.0 kg)

70 lbs (31.8 kg)

70 lbs (31.8 kg)

65 lbs (29.5 kg)

70 lbs (31.8 kg)

60 lbs (27.2 kg)

65 lbs (29.5 kg)

60 lbs (27.2 kg)

60 lbs (27.2 kg)

65 lbs (29.5 kg)

60 lbs (27.2 kg)

60 lbs (27.2 kg)

55 lbs (25.0 kg)

50 lbs (22.7 kg)

50 lbs (22.7 kg)

60 lbs (27.2 kg)

50 lbs (22.7 kg)

50 lbs (22.7 kg)

45 lbs (20.4 kg)

40 lbs (18.2 kg)

40 lbs (18.2 kg)

Wall Bracket

Capacity

65 lbs (29.5 kg)

100 lbs (45.4 kg)

60 lbs (27.2 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

65 lbs (29.5 kg)

100 lbs (45.4 kg)

60 lbs (27.2 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

65 lbs (29.5 kg)

100 lbs (45.4 kg)

60 lbs (27.2 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

65 lbs (29.5 kg)

100 lbs (45.4 kg)

60 lbs (27.2 kg)

95 lbs (43.1 kg)

90 lbs (40.9 kg)

90 lbs (40.9 kg)

Command Post

Capacity

65 lbs (29.5 kg)

100 lbs (45.4 kg)

60 lbs (27.2 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

65 lbs (29.5 kg)

100 lbs (45.4 kg)

60 lbs (27.2 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

65 lbs (29.5 kg)

100 lbs (45.4 kg)

60 lbs (27.2 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

100 lbs (45.4 kg)

65 lbs (29.5 kg)

100 lbs (45.4 kg)

60 lbs (27.2 kg)

95 lbs (43.1 kg)

90 lbs (40.9 kg)

90 lbs (40.9 kg)

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 23

.406"

(10.3 mm)

1"

(25.4 mm)

.5"

(12.7 mm)

Center-line

TOP

2.5"

(63.5 mm)

5"

(127 mm)

7"

(178 mm)

8"

(203 mm)

Wall Mount Bracket
Hole Pattern

13-3/8"

(340 mm)

6-11/16"

(169 mm)

ø 9/16"

(14 mm)

Center

lines

11-13/32"

(289 mm)

7-1/2"

(191 mm)

1-3/8"

(35 mm)

13-3/8"

(340 mm)

6-11/16"

(169 mm)

3" x 3" Post Hole Pattern 4" x 4" Post Hole Pattern

8-9/32"

(210 mm)

ø 9/16"

(14 mm)

Center

lines

13-13/32"

(341 mm)

10"

(254 mm)

1-13/64"

(30.6 mm)

16-9/16"

(421 mm)

16-9/16"

(421 mm)

8-9/32"

(210 mm)

.87"

(22.1 mm)

5"

(127 mm)

8"

(203 mm)

8"

(203 mm)

8"

(203 mm)

4"

(102 mm)

2"

(50.8 mm)

.5"

(12.7 mm)

1"

(25.4 mm)

1"

(25.4 mm)

Wall Track Hole Pattern

Enclosure Interface
for N12 Arm

Ø 1.83"

(46.5 mm)

Ø 4.8"

(121.9 mm)

1.48"

(37.6 mm)

1.48"

(37.6 mm)

2.95"

(74.9 mm)

2.95"

(74.9 mm)

12", 6" and Fixed Arms
Hole Pattern

2.38"

(60.5 mm)

ø .42"

(10.7 mm)

.67"

(17 mm)

2.5"

(63.5 mm)

1.38"

(35.1 mm)

.5"

(12.7 mm)

16" and N12 Arms
Hole Pattern

2.38"

(60.5 mm)

ø .42"

(10.7 mm)

.67"

(17 mm)

3.5"

(88.9 mm)

1.61"

(40.9 mm)

1.38"

(35.1 mm)

.5"

(12.7 mm)

Extender Arms
Hole Pattern

3.25"

(82.6 mm)

ø .42"

(10.7 mm)

4.5"

(114.3 mm)

1"

(25.4 mm)

1.38"

(35.1 mm)

.94"

(23.9 mm)

Appendix

Hole Patterns

24 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

No matter how demanding the mobile computing application, or what type of
computing equipment you need to mobilize, Ergotron has a computer cart to get
the job done. Ergonomic design, versatile cable management, high-quality
components and rugged construction let you go mobile with confidence and stay
mobile over the long term.

HD-2 Series Cart

The HD-2 Series Cart provides easy single-motion adjustment to place your
computer where you need it with little effort. Available in Deluxe and Basic models
for both flat panel monitors and laptop computer configurations. Consult the HD-2
Series Cart Orderguide, 870-03-025, for ordering information.

Mobile WorkStand

The Mobile WorkStand integrates technology and convenience, allowing the user
to move a computer system from room to room. It quickly adjusts to a sitting or
standing user height, providing an ergonomically correct work environment at
all times. Consult the Flat Panel Mounting Solutions Orderguide, 870-03-005, for
ordering information.

Mobile WorkCenter

The Mobile WorkCenter is a complete workstation on wheels, with extra storage
space for equipment, tools and supplies. Consult the Mobile WorkCenter
Orderguide, 870-03-010, for ordering information.

If you don’t see what you need, Ergotron’s Custom Solutions Group can design
and build custom carts for unique applications.

Appendix

Computer Carts

HD-2 Series –
Laptop Deluxe
Configuration

HD-2 Series –
Flat Panel Monitor
Deluxe Configuration

Mobile WorkStand
shown with Ergotron’s
400 Series Flat Panel
Monitor Arms.

Mobile WorkCenter
shown with Ergotron’s
300 Series Desk
Mount Flat Panel Arm.

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 25

Several keyboard and laptop mounting products are available from Ergotron.
Choose from arms and pivots that extend, raise, swing and/or tilt a keyboard to
the point of use. Keyboard and Mouse Trays featured on page 18 of this guide are
compatible with these products.Use with Command Post, Wall Track and other
mounting options. Composed of steel and high-impact plastic, these arms and
pivots are built to last.

100 Series Pivots

Tilt your keyboard to a comfortable angle. This low-profile mount saves space by
folding a keyboard flat against the wall when not in use. Mount them to most any
vertical surface. A simple and economical choice.

200 Series Arms

200 Series products provide telescoping motion. Combine these arms together to
provide more extension capability. Two 9" Extensions will extend a keyboard out
20 inches, or fold it back out of the way when not in use. Cables are neatly routed
through the arm.

300 Series Vertical Adjustment Arms

300 Series products move a keyboard through a 16-inch vertical range of motion.
Use alone or combine with 200 Series Extensions to add telescoping adjustment
to your configuration.

400 Series Vertical Adjustment Arms

Sleek and rugged, the 400 Series Keyboard Arm provides an unparalleled vertical
range of motion of 22 inches. That means true sit-to-stand adjustability. Cables are
routed and concealed within the arm.

For more information, see the Flat Panel Mounting Solutions Orderguide,
870-03-005, on our website – www.ergotron.com.

18 0°

22"

(559 mm)

100 Series Keyboard Pivot
& Keyboard Tray

400 Series Keyboard Arm –
vertical range of motion

300 Series Keyboard Arm
with Extension, Keyboard
Tray with Sliding Mouse
Tray & Wrist Rest

200 Series Keyboard Arm
& Laptop Holder

400 Series Keyboard Arm,
Keyboard Tray with Sliding
Mouse Tray & Wrist Rest,
Mouse Pouch

Appendix

Other Keyboard/
Laptop Mounts

26 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018

To obtain optimum performance from a workstation, consider the following topics during installation:

1. The adjustment range of the product.

2. The use-mode of the product…

a. Monitoring only?
b. Data entry?
c. User will be sitting?
d. User will be standing?
e. User will be sitting and standing at different times?

3. Vertical mounting height of the product in respect to user(s)…

a. Female or male only?
b. Female and male both?
c. Average height of users?

Vertical Positions — The vertical positioning data provided in this guide has been established to
optimize the human/machine interface when in the following work modes:

1. Sitting — Mounting of the computer workstation in a vertical position to optimize its use by
various size personnel when seated in a standard height chair. If the adjustment range of the
device is greater than the standard height variance for the range of users, this additional vertical
adjustment range can be used to “park” the monitor and/or keyboard out of the way, or provide an
increased range of adjustment.

2. Standing — Mounting the computer workstation in a vertical position to optimize its use by various
size personnel when standing. If the adjustment range of the device is greater than the standard
height variance for the range of users, any additional vertical adjustment range can be used to
“park” the monitor and/or keyboard out of the way, or provide an increased range of adjustment.

3. Sit-to-Stand — Mounting the computer workstation in a vertical position to optimize its use by
various size personnel when shifting between a sitting or standing position. Note that only the
12", 16" and N12 Arms have varying degrees of this capability.

Vertical Height Data — The vertical height data used in this guide is set forth in the following
tables and is based on scientific data. In this guide, we have chosen to utilize two primary criteria for
determining mounting height of our ergonomic computer workstations:

1. Eye Height — The following vertical height mounting tables are based upon the sound ergonomic
principal that for optimum viewing comfort and proper posture, the top of the CRT monitor screen
should be level with or slightly below the eye height of the user. This provides an approximate 15°
viewing angle to the center of the screen at a 20" viewing distance as shown in the figure below.

2. Elbow/Typing Height — Another important criteria for determining optimum mounting height of a
computer workstation is to provide optimum elbow or typing height for a range of operators.
Ergotron offers a variety of keyboard options: some have a fixed descent below the CRT monitor;
others provide both vertical and tray tilt adjustability. In all cases an attempt should be made to
provide an optimum vertical height relationship between the keyboard tray and the CRT screen.

20" Viewing

Distance

15°

30°

Appendix

Ergonomics Data

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 27

Eye Height/Elbow Height Tables — The following tables provide eye height and elbow height data
based on anthropometric data for the US population.

* Eye height/elbow height = distance from top of CRT monitor screen to keyboard tray—roughly 21".
** Workstation with 6" of vertical adjustability can provide optimum viewing height for the average range of female to

male operators in either a sitting or standing environment.

*** Workstation with 16" of vertical adjustability can provide a sit-to-stand workstation environment for a range of

average height persons. An adjustment range of 20" will cover the sit-to-stand range of average female to
average male operators, i.e. 64.4"–44".

The above tables provide mounting height data to set up a workstation for an average range of operators: average
female, average person or average male. If increased adjustability ranges are required, reference the tables below,
which provide anthropometric data for 90% of US population.

Note: Values do not include shoe height, usually 1" for males and 1/2" for females.

* Workstation with 12.9" of vertical adjustability can provide optimum viewing height for the 5% female to 95% male

population in either a sitting or standing environment.
** Eye/elbow height = top of CRT screen to keyboard tray.
*** To provide a sit-to-stand work environment for the complete 5% female to 95% male population requires a

workstation with 27.8" of vertical adjustability.
† “90% of Population” excludes the shortest 5% of females and the tallest 5% of males in the US population.

This entry denotes the female who is at the
5% mark of a scale ranging 0% to 100%.

This entry denotes the male who is at the
95% mark of a scale ranging 0% to 100%.

95% of Population

Average

Person

Average

Female

5%

Female

Average

Male

95%
Male

50% of Population

Average

Person

Average

Female

5%

Female

Average

Male

95%
Male

Appendix

Anthropometric Data for Average Range of Users

Anthropometric Data for 90% of Population

†

Maximize the effectiveness of
your computer systems with
Ergotron Products

© 2004 Ergotron, Inc.
rev. 05/13/2004 870-03-018

Ergotron, Inc.: St. Paul, MN; [phone];
www.ergotron.com; [e-mail]

Ergotron Europe: Amsterdam, The Netherlands;

Tel. [phone]; [e-mail]

Ergotron Canada: Calgary, Alberta;
[phone]; [e-mail]

S

ince 1982, Ergotron has designed and engineered products specifically for improving the human

interface with computers. Innovative engineering concepts incorporate the human factor into each
and every product. With our patented Monitor Suspension technology as the core, Ergotron designs
Mounting Solutions that consistently meet the ever changing needs of our customers.

Our experienced Sales Representatives will work with you to define your requirements and custom
configure standard components to cost-effectively meet those requirements. If you do not see a
product that meets your requirements, call us and we will tailor a solution to your needs.