ERGOMART LS1512 Installation Instructions Manual
LS1512
Installation Instructions
www.ergomart.com | 888 420 3200
1
A
Insert pole (K) into securely fastened
mount. Tighten set screw on mount with
3/32” Allen wrench (A) so that pole resists
spinning.
4
E
E
E
E
Attach VESA adapter to monitor using four
M4 x 12mm screws (E). Some monitors
may require a spacer kit. See page 2 for
details.
2 3
J
A
Slide collar and dual arm (J) onto pole and
tighten collar thumbscrew when adjusted
to desired height. Tighten dual arm set
screw with 3/32” Allen wrench until dual
arm has desired rotational resistance.
5
F
G
Insert tilter mechanism pin into end of arm.
Align dog washer(F) with bottom of tilter
mechanism pin and attach with flat head
screw (G).
Attach the VESA adapter (C) to the tilter
mechanism (B) using four 10-32 x 3/8”
flat head screws (D).
6
Locate set screw on bottom of tilter
mechanism by tilting monitor upward.
Use 7/32 Allen wrench (H) to adjust rotation
resistance to desired level.
B
C
D
D
D
D
H
7 8
Turn screws on the bottom of arm
extensions to adjust rotational resistance
to the desired level.
Ergonomic solutions for office and light industrial work environments
Place cables into wire management clamps
under arms and use cable clip (I) to secure
cables to pole.
©2016 Ergomart. All rights reserved.
Please call Ergomart at
888 420 3200
with your questions
I
www.ergomart.com
PAGE 1 OF 2
LS1512
Parts List
www.ergomart.com | 888 420 3200
ITEM DESCRIPTION / PART NO. QUANTITY
Dual Quad
A.
3/32" Allen Wrench
1 2
B.
C.
Monitor Tilter
75/100mm VESA Adapter Plate
D. 10-32 x 3/8" Philips Flat Head Screw
E. M4 x 12mm Philips Pan Head Screw
F. Dog Washer
G. 10-32 x 3/8" FPhMS w/Lock Patch
H. 7/32" Allen Wrench
I. Cable Clip
2 4
2 4
8 16
8 16
2 4
2 4
1 1
1 2
J. 1512 Dual Arm 1 2
K. 14 Inch P118 Pole 1 0
L. 28 Inch P118 Pole 0 1
OPTIONAL SPACER KITS In some cases, the mounting surface on your monitor may be recessed further than permitted by VESA
As a result, a spacer kit may be required.
.25" Spacer Hardware Kit
(4) .25" Spacers
(4) M4 x 18mm Phillips Pan Head Screws
Order # SPKT-1/4
.5" Spacer Hardware Kit
(4) .5" Spacers
(4) M4 x 25mm Phillips Pan Head Screws
Order # SPKT-1/2
®
standards.
PAGE 2 OF 2
Ergonomic solutions for office and light industrial work environments
©2016 Ergomart. All rights reserved.
Loading...