ERGO-FIT CARDIO LINE 4100 S, CARDIO LINE 4000 MED, CARDIO LINE 4100 MED, CARDIO LINE 4000 S SP, CARDIO LINE 4000 S MED Owner's Manual

...
CARDIO
Owner‘s manual
CARDIO LINE 4000
CARDIO LINE 4000
CARDIO LINE 4000
For further information about ERGO-FIT products please contact:
ERGO-FIT GmbH & Co. KG
Blocksbergstraße 165 D-66955 Pirmasens
Phone: +49 (6331) 2461-0 Fax.: +49 (6331) 2461-55 E-Mail: info@ergo-fit.de http: www.ergo-fit.de
Development and production of all devices of the MED series according to the European Medical Device Directive 93/42/EWG. They thus show the CE marking and the number of the notified body.
© 2018 by ERGO-FIT GmbH & Co. KG. All rights reserved.
This user manual has been created with greatest possible diligence. Please inform us of any details that do not
correspond to your training device so we can take care of this as quickly as possible.
This document is protected by copyright. All rights originating from this, particularly the right of copying, duplication,
distribution as well as translation and reprint, even copies in extract, are reserved. No part of this manual may be
reproduced, manifold or distributed for any purposes or in any form, by any means, (print, photocopy, microfilm, or any
other information-saving mechanisms) without prior written permission of ERGOFIT GmbH & Co. KG.
Trade marks: ERGO-FIT and the ERGO-FIT Logo are registered trade marks of ERGO-FIT GmbH & Co. KG. POLAR
is a registered trade mark of POLAR Electro GmbH. All other trademarks used/shown in this text are trademarks of
their respective owners and are thus protected.
Technical and optical modifications as well as misprints reserved.
Version: CARDIO LINE 4000-20180301-en
Printed in Germany
Dear customer,
Thank you for purchasing an ERGO-FIT training device. You are now the owner of a state­of-the-art training system that combines highest technical standards with easy-to-use functionality.
This user manual provides information on several models. This means that you may find explanations that do not directly apply to your training device.
This user manual contains important information on how to operate and use your training device. We recommend that you read this user manual carefully before starting with your workout in order to become familiar with your training device quickly and to understand its correct and safe operation.
Should you have any further questions that are not answered in this manual, please contact us. ERGO-FIT will try to help as quickly as possible.
The ERGO-FIT team can also advice you on compatible ECG equipment.
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Table of contents
1 General Information ...................................................................................... 1
2 Safety Instructions ...................................................................................... 5
3 Quick Reference .......................................................................................... 15
4 Intended Use ................................................................................................ 17
5 Transport and Installation ............................................................................. 21
6 Setup ........................................................................................................... 33
7 Operation ..................................................................................................... 49
8 Workout ........................................................................................................ 81
9 Maintenance ................................................................................................. 85
10 Troubleshooting ........................................................................................... 95
A Appendix ...................................................................................................... 103
This user manual provides information on several devices.
Details may vary depending on your model!
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Please note:
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Chapter 1 General Information
1.1 ERGO-FIT Cardio Equipment at a Glance .................................................... 2
1.2 General Information on this Manual .............................................................. 3
1.3 Parts Included in the Delivery ....................................................................... 3
1.4 Customer Service .......................................................................................... 3
1.5 Disposal ......................................................................................................... 4
This user manual provides information on several devices.
Details may vary depending on your model!
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Please note:
1
General Information
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
1 General Information
1.1 ERGO-FIT Cardio Equipment at a Glance
ERGO-FIT CARDIO LINE 4000 machines are intended to provide a cardiovascular workout while simultaneously exercising small (e.g. CIRCLE) and large (e.g. CROSS) muscle groups. ERGO-FIT cardio machines offer you best training possibilities, regardless of your age, gender or fitness level.
Among others, the optimal regulation of the workout intensity and the precise workout control are highlights of the whole product line. In addition, quiet operation, ease of use and the consideration of customer-specific requirements demonstrate ERGOFIT‘s focus: High technical standard, optimum workout environment and precise workout control, combined with user-friendly operation.
However, technology is not the only crucial factor for outstanding workout equipment. The machines must also meet biomechanical and medical requirements: The health of our users is what matters most! Thus, a sophisticated training and testing system can only be developed by combining technical and electronic expertise with the latest results in sports medicine and coaching science. ERGO-FIT devices clearly meet this target.
Our CARDIO LINE consists of:
CARDIO LINE 4000/4100, 4000/4100 S, 4000 SP, 4000 S SP: Workout equipment
especially designed for use in professional facilities.
CARDIO LINE 4000/4100 MED, 4000/4100 S MED: Workout equipment especially
designed for medical purposes.
The lifetime of the equipment is 6 years.
Your benefits... Regular workout on these machines reduces the risk of cardiovascular diseases and improves physical fitness in an optimal way - even at an advanced age. Consequently, this training and testing system represents an essential tool for injury prevention and rehabilitation. You will feel fit, more powerful, more attractive, and more balanced.
A list of compatible external equipment can be obtained from ERGO-FIT.
2
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
1.2 General Information on this Manual
Whether you are already familiar with ERGO-FIT workout equipment or whether you have not used our machines yet: This manual gives you important information. You can easily find the information you are looking for by searching the table of contents. Users who are already familiar with ERGO-FIT equipment might find the Quick Reference helpful. However, if you are an experienced user and only rely on the Quick Reference please make sure that you nevertheless review the safety guidelines.
The manual contains many tips and tricks to help you get familiar with your cardio machine as quickly as possible.
Please always keep the manual at hand to avoid unnecessary and time-consuming calls at the customer service and to quickly fix problems on your own.
1.3 Parts included in the Delivery
Please check if all parts are included in the delivery and inform our sales department immediately of any missing parts.
Please ensure that the following parts are included in your delivery:
1. The correct machine (model, series)
2. One power cord per machine
3. One POLAR set per machine (transmitter, chest belt)
1.4 Customer Service
Contact our customer service for troubleshooting services, technical support, spare parts delivery and information.
In case of technical questions and service orders, please call us at:
Head office: Phone: +49 (6331) 2461-0 Fax: +49 (6331) 2461-55 Maintenance and spare parts: Phone: +49 (6331) 2461-20 international or: +49 (6331) 2461-45 international or: +49 (6331) 2461-23 or: +49 (6331) 2461-27 or: +49 (6331) 2461-29
3
General Information
1.5 Disposal
These machines are appliances according to the Electronic Equipment Act. They do not belong into the regular household waste but must be disposed of by a certified company. For more information on responsible bodies please see:
stiftung elektro-altgeräte register (EAR) Benno-Strauß-Straße 1 D-90763 Fürth Phone: +49 (911) 766650 Fax: +49 (911) 7666599 Mail: info@stiftung-ear.de Web: www.stiftung-ear.de
4
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Chapter 2 Safety Instructions
2.1 What You Need to Know When Using Your Workout Equipment .................. 6
2.2 Instructions for Safe Operation ...................................................................... 10
2.3 How to Avoid Electric Shocks ........................................................................ 10
2.4 Choosing the Right Place of Installation ....................................................... 11
2.5 What Needs to be Considered in Case of Repair? ....................................... 11
2.6 Things to be Avoided ..................................................................................... 11
2.7 Contraindications .......................................................................................... 12
This user manual provides information on several devices.
Details may vary depending on your model!
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Please note:
5
Safety instructiones
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
2 Safety Instructions
Please read the following chapter carefully and respect all safety instructions before you start using your workout equipment. Please keep this manual in a safe place in order to pass it over to future owners if you sell your workout device.
For evidence of ownership, please complete the following form: Model/series: __________________________________ Serial number: __________________________________ Date of purchase: __________________________________
You will need this information in case of warranty.
The following symbols designate important information
Caution!
This warning draws the attention to hazards that could result in personal injury or death.
Warning!
Attention!
Tip!
This warning draws attention to hazards that could result in property damage.
Attention, switch off and unplug the machine.
This hint contains important information and tips to improve operation.
2.1 What You Need to Know When Using your Workout
Equipment
General Information
Carefully read this manual prior to using your product.
Familiarize yourself with the machine before you start your workout.
Please consult your physician before you start using the machine and note the
contraindications (see Chapter 2.7).
It´s the owner´s responsibility to inform the users of all warnings and instructions
provided with the equipment.
Before using the machine please perform a proper function test (see chapter 7.3).
For safety reasons inspect the power cord for signs of damage before each use. If the machine is damaged do not use it until it is repaired.
6
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
In order to reduce risk of injury please wear appropriate clothes and footwear for
exercise.
In case of nausea, dizziness, pain in the chest, limbs or joints, stop workout
immediately and see your trainer or a doctor.
If you wear a cardiac pacemaker or have health problems please consult your
doctor before using the machine. Discuss your workout program with him. Only use MANUAL mode
Your workout machine is not a toy! Children must be supervised if they are near the
equipment. Children cannot always predict possible hazards. Parents or other supervisors should always be aware of their responsibility because the playful and adventurous nature of children may lead to situations that the workout machine is not intended for.
The machine is only to be used on instruction of a physician and / or a supervisor.
The machine must not be used without the presence of a supervisor.
Make sure that third parties do not stand close to moving parts.
Do not place any beverages or food on your training machine. Use the bottle
holder.
Do not stand on the casing of the machine and do not lean on the control panel or
the handle bar.
Start the training slowly and gradually increase the intensity until you reach the
desired level.
Do not jump from the exercise machine during your workout except in emergency
cases (see Chapter 6.3.7). Only get off the machine when all moving parts have stopped completely. Otherwise you might fall.
Do not touch the USB port, RS232 port or audio port during the training.
Maintain the workout positions described in chapter 6.3 during the entire workout.
Please review the additional safety and operational instructions in this manual.
CAUTION! The heart rate control system may be faulty. Excessive training may
cause dangerous injury or even lead to death. Immediately stop training in case of an unusually strong reduction of your physical performance
Certain conditions or actions can cause static electrification of electronic devices.
Using earphones can result in short minor electrostatic discharge. To reduce the risk of electrostatic discharge when using earphones touch a metal object before connecting the earphones!
All safety instructions in this manual are based on many years of experience and
selfconception.
7
Safety instructiones
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Machine Specific Information
CIRCLE
When folding the seat the gap for the seatpost should be free of obstacles.
Otherwise there is a risk of injury.
When using the seat watch out for handles and moving parts. There is a risk of blunt
injuries (e.g. hitting).
When adjusting the revolving unit use the adjusting lever on the yellow casing to
avoid pinching.
Please stay away from the crank handles.
Warning! Do not exceed the maximum user weight of 200 kg.
Before each use, inspect the seat, the crank handles and the casing for damage. In
case of damage, have the machine repaired immediately.
The end stop (see chapter 5.5.1 Parts) is to prevent that the seat pad touches the
shroud when folding the seat because this might cause abrasion of the pad.
CROSS
Before each use, inspect the pedals (footrest) and the casing for damage. In case
of damage, have the machine repaired immediately.
Warning! Do not exceed the maximum user weight of 150/200 kg.
Do not take your feet off the foot rests during workout and do not trespass the
protection element.
Do not stop the foot rests against the direction of rotation.
Do not change the motion direction of the foot rests during movement. You may
change the direction only after the foot rests have come to a complete stop.
Keep the motion area next to the foot rests and the handles clear.
Note: There are dangerous areas where you might get squeezed in the motion area
of the pedals, which increase the risk of accident.
CYCLE
Warning! Do not exceed the maximum user weight of 180 kg.
Before each use, inspect seat, handle bar, pedals and casing for damage. In case
of damage, have the machine repaired immediately.
Do not lean over the handlebar and do not lean to the side. The machine might fall
over.
Do not take your feet off the pedals during training.
Tighten the pedals and the pedal cranks after 3 to 5 operating hours. Otherwise
there is a risk of injury. Note that the left pedal has a left-handed thread and the right pedal has a right handed thread, see Chapter 9.1 for a more detailed description.
Tighten the seat and handlebar clamp after adjusting the seat and handlebar.
Otherwise there is a risk of injury.
8
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
MIX
Note: Do not exceed the maximum user weight of 200 kg.
Note: There are dangerous areas where you might get squeezed in the motion area
of the pedals, which increase the risk of accident.
Before each use, inspect pedals (footrest), guides, seat and casing for damage. In
case of damage, have the machine repaired immediately.
Do not take your feet off the pedals during training.
Do not stop the pedals against the direction of rotation.
Do not change the motion direction of the pedals during movement. You may
change the direction only after the pedals have come to a complete stop.
Keep the motion area next to the pedals and the seat clear.
Get on / off the machine only when the pedals are not in motion.
RECUMBENT
Warning! Do not exceed the maximum user weight of 200 kg.
Before each use, inspect seat, pedals and casing for damage. In case of damage,
have the machine repaired immediately.
Tighten the pedals and the pedal cranks after 3 to 5 operating hours. Otherwise
there is a risk of injury. Note that the left pedal has a left-handed thread and the right pedal has a right handed thread, see Chapter 9.1 for a more detailed description.
Make sure to tighten the seat clamp after adjusting the seat. Otherwise there is a
risk of injury.
Do not take your feet off the pedals during training.
STAIR
Note: Do not exceed the maximum user weight of 200 kg.
Before each use, inspect the pedals (footrest) and the casing for damage. In case
of damage, have the machine repaired immediately.
Keep the motion area next to the pedals clear.
Do not take your feet off the pedals during training.
Warning! There are dangerous areas where you might get squeezed in the motion
area of the pedals, which increase the risk of accident.
TRAC
Note: Do not exceed the maximum user weight of 200 kg.
Before each use, inspect running deck, handles and casing for damage. In case of
damage, have the machine repaired immediately.
Do not turn round, stop or jump on the treadmill if it is in motion.
Note: Keep away from the dangerous pull in area at the rear end of the treadmill!
Keep away long hair, loose clothes, jewelry, shoestrings towels etc. from this area.
9
Safety instructiones
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Make users aware of this danger.
Keep a clearance distance of two meters lenght and one meter width around the
TRAC.
Check the emergency stop function before starting the machine.
Press the emergency stop button only when you are about to fall.
If the display indicates an overheating of the isolating transformer (for further
information on error messages see chapter 10.2), perform the procedures described in chapter 10.2.
Use the safety cord!
After pulling the safety cord you need to turn off the machine by pressing the on / off
switch before you reinsert the magnet!
All safety instructions in this manual are based on many years of experience and selfconception.
2.2 Instructions for Safe Operation
After delivery, make sure that the machine has not been damaged during transport.
In case of doubt, contact our customer service and do not start the machine.
Slots and openings on the machine serve as ventilation. Do not cover these
openings, because this can cause the components to overheat.
Always check the power cord for damages before starting the machine.
Switch off the machine after the workout and disconnect it.
When setting up the machine make sure that there is a safety distance of at least 1
m around the machine to prevent danger to others. This also prevents dysfunction of the heart rate control.
Equipment of the 4000/4100 MED and 4000/4100 S MED series are protected
against harmful ingress of water and solid objects according to IP21
For 4000/4100 MED, 4000/4100 S MED the protection guidelines according to EN
60601-1-1:2006 apply.
If you connect additional devices to the CARDIO LINE 4000 line you are committed
to comply to the system standard EN 60601-1-1..
2.3 How To Avoid Electrical Shocks
Do not use damaged power cords.
Do not unplug by pulling on the cord.
Switch off and unplug the machine before you open it.
If liquid gets inside the machine, unplug the machine immediately and call the
customer service.
10
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Do not insert any objects in the ventilation slots. This may cause a shor t circuit.
Don‘t run the supply cable under the machine, neither between the mobile parts
or devices of the machine (e.g. tiltable seat with the CIRCLE). The insulation could be damaged unconsciously.
2.4 Choosing the Right Place of Installation
The machine can be set up on any level and stable floor. Make sure that it stands
firmly on the floor.
Never put wood, cardboard or similar materials underneath the machine to
compensate for unlevel surface. This increases the risk of accident.
2.5 What Needs to be Considered in Case of Repair?
Electric parts may only be replaced by original parts.
Do not open the drive system and control system. This will void the warranty.
Repairs must be carried out by a qualified technician only. If you do not have the
necessary qualifications, contact the ERGO-FIT Service Center. Electrical or mechanical modifications or alterations performed by unauthorizes personnel may void the warranty.
2.6 Things to be Avoided
Only use the machine for the purposes it was intended for. If you use the ERGO-FIT
machine for other than the intended purpose, you will be charged for all damages resulting from this. In this case any warranty is void!
Never use the machine in any other way than for those purposes described in this
manual. This may damage the machine and can cause serious health problems.
Never exercise on a damaged machine.
When exercising, you should never go beyond your current fitness level. This may
cause serious health problems.
Never lean on the machine except on the handrails intended for this, and do not
make inappropriate movements. Otherwise you might fall.
Refer to the appendix for a list of the most important safety guidelines. Attach this list near the machine where it is clearly visible. All users of the machine must familiarize themselves with the dangers and safety regulations. The manufacturer will not be liable for personal injury or property damage.
11
Safety instructiones
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
2.7 Contraindications
Please note: To avoid overstress of the athlete and subsequent serious diseases of the cardiovascular system the following contraindications must be observed during performance of an endurance training, i.e. if one of the following symptoms is already known before the training is started in no case an endurance training may be performed on a machine of the CL 4000:
Absolute contraindications:
angina pectoris
cardiac arrhythmia and/or Decompensated heart failure
distress respiratory, sense of oppression
circulatory disorder with rest pain in affected extremeties
hypertonia (constantly raised blood pressure) (in this case, please contact your
doctor)
coronarsklerosis
stress pain in your legs when walking less than 100 m
acute respiratory infections)
feverish infections
circulatory problems, feeling of dizziness
nausea, Vomiting
acute coronary syndrome
acute myocardial infarction
symptomatical severe aortic stenosis
decompensated cardiac insufficiency
acute ulmonary embolism
acute carditis (Myo-, Endo-, Pericarditis)
acute phlebothrombosis of the upper extremeties
acute aortic dissection
12
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
If the following symptoms occur the training must immediately be stopped to avoid an overstress of the human organism!
distress respiratory, sense of oppression
angina pectoris (chestpain in sudden attacks)
maximum heart rate > 200-age
nausea, emesis
circulatory problems
ilness (heavily tiredness, lassitude, feeling of dizziness)
rapidly decreasing heart rate
rapidly decreasing/increasing blood pressure
main artery disease
moderate cardiac valve diseases
electrolyte imbalance
arterial hypertension (RR > 200/110mmHg)
tachyarrhythmie oder Bradyarrhythmie
hypertrophic-obstructive cardiomyopathy and other forms of outflow tract
obstruction
advanced AV-blockages
anemia
physical and/or mental health problems
arrhythmias
13
Safety instructiones
14
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Chapter 3 Quick Reference
This user manual provides information on several devices.
Details may vary depending on your model!
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Please note:
15
Quick Reference
3 Quick Reference
After delivery of your cardio machine, please check if the serial number (see name plate) is identical with the one indicated on the delivery note and if all components listed in chapter
1.3 („Parts included in the delivery“) are included in the delivery.
After the machine has been plugged in and switched on, the software version is displayed. Then the main menu will appear.
The control panel provides the UP and DOWN (TRAC model only), PLUS, MINUS, START and STOP buttons in this order.
The liquid-crystal display (LCD) is illuminated and shows the elapsed training time (min:s), your heart rate, power (Watts), speed range (1/min) or the speed (km/h) respectively, the distance (m or km), workload (level) as well as calories burnt.
When starting the workout on your cardio machine, the main menu will always appear first. Hold the PLUS or MINUS button until MANUAL is highlighted and confirm your selection with START. You are now in the manual mode.
In this mode you can select any workout time and choose any workload level. The workout parameters will be displayed during the whole workout.
Press STOP to stop your workout. The workout parameters remain on the display. Press the STOP button again to return to the main menu. The display will also automatically return to the main menu after 2 minutes if no action is carried out.
Note: For workouts in Profile, Cardio-/System or Test mode, please read the detailed instructions. Tests can be performed on CYCLE and TRAC machines only.
16
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Chapter 4 Intended Use
4.1 Product Lines ................................................................................................ 18
4.1.1 CARDIO LINE 4000/4100, 4000/4100 S, 4000 S SP, 4000 SP .................... 18
4.1.2 CARDIO LINE 4000/4100 MED, 4000/4100 S MED .................................... 18
4.2 Models .......................................................................................................... 18
4.2.1 CIRCLE ......................................................................................................... 18
4.2.2 CROSS ......................................................................................................... 18
4.2.3 CYCLE .......................................................................................................... 19
4.2.4 MIX ............................................................................................................... 19
4.2.5 RECUMBENT ............................................................................................... 19
4.2.6 STAIR ........................................................................................................... 19
4.2.7 TRAC ............................................................................................................ 19
This user manual provides information on several devices.
Details may vary depending on your model!
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Please note:
17
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Intended Use
4 Intended Use
4.1 Product Lines
The following ERGO-FIT cutting-edge product lines have been designed to meet highest expectations.
4.1.1 CARDIO LINE 4000/4100, 4000/4100 S, 4000 S SP, 4000 SP
This product line offers stationary equipment for cardio-vascular workout. They are spe­cially designed for use in professional facilities. They are provided for use in training are­as of organizations such as spor t associations, educational establishments, hotels, sport halls and clubs, where access and control is specifically regulated by the owner owner (person who has the legal responsibility). They allow for management, control, and docu­mentation of the workout.
4.1.2 CARDIO LINE 4000/4100 MED, 4000/4100 S MED
This product line offers stationary equipment for cardio-vascular workout. It does not only allow for precise workout control, diagnostics, and therapy of cardio-vascular diseases but als o provide s feature s fo r perfor mance diagnostics. The machines are to meet al l ap plica b­le medical requirements and thus have to offer precise measuring methods in addition to the workout capabilities. Explicit result analysis helps to optimize and track any fitness and health training. To ensure measuring accuracy, metrological controls need to be carried out on the CYCLE line at regular inter vals (every second year, in compliance with LMKM = Leitfaden zu messtechnischen Kontrollen von Medizinprodukten mit Messfunktion by Phy­sikalisch- Technische Bundesanstalt).
4.2 Models
For optimum results all product lines are subdivided into dif ferent models in order to per­fectly adapt to the customers‘ individual needs.
4.2.1 CIRCLE
CIRCLE is an upper body ergometer. Workout is performed in seated or standing position by arm movements. The workout intensity can be modified in order to achieve optimum cardio -vascular results.
4.2.2 CROSS
CROSS is an elliptical trainer which allows for a continuous, two-way alternate, elliptical movement of feet and arms. It is equipped with an additional motion device for the arms. The workout intensity can be modified in order to achieve optimum cardio-vascular re­sults.
18
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
4.2.3 CYCLE
CYCLE is an exercise bike for workout with pedaling movements. The workout intensity can be modified in order to achieve optimum cardio-vascular results.
4.2.4 MIX
MIX is an elliptical trainer which allows for a continuous, two-way alternate, elliptical movement of feet and arms in semi-recumbent position. The workout intensity can be modified in order to achieve optimum cardio -vascular results.
4.2.5 RECUMBENT
RECUMBENT is an exercise bike for workout with pedaling movements in a semireclined position. The workout intensity can be modified in order to achieve optimum cardio­vascular results.
4.2.6 STAIR
STAIR is a workout device that allows for alternate movements similar to climbing stairs. Both pedals move independently of each other. The workout intensity can be modified in order to achieve optimum cardio-vascular results.
4.2.7 TRAC
TRAC is a treadmill for walking or running. The workout intensity can be modified in order to achieve optimum cardio-vascular results.
19
Intended Use
20
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Chapter 5 Transport and Installation
5.1 Transport ...................................................................................................... 22
5.1.1 CIRCLE ........................................................................................................ 22
5.1.2 CROSS ......................................................................................................... 22
5.1.3 CYCLE ......................................................................................................... 23
5.1.4 MIX ............................................................................................................... 23
5.1.5 RECUMBENT ............................................................................................... 24
5.1.6 STAIR ........................................................................................................... 24
5.1.7 TRAC ............................................................................................................ 24
5.2 Setup Location and Installation ..................................................................... 25
5.3 Ambient Temperature .................................................................................... 25
5.4 Plugging In .................................................................................................... 25
5.4.1 Power Supply ................................................................................................ 26
5.4.2 Cabeling ........................................................................................................ 27
5.4.3 Safety Cord ................................................................................................... 27
5.5 Components ................................................................................................. 28
5.5.1 CIRCLE ........................................................................................................ 28
5.5.2 CROSS ......................................................................................................... 29
5.5.3 CYCLE ......................................................................................................... 29
5.5.4 MIX ............................................................................................................... 30
5.5.5 RECUMBENT ............................................................................................... 30
5.5.6 STAIR ........................................................................................................... 31
5.5.7 TRAC ............................................................................................................ 31
This user manual provides information on several devices.
Details may vary depending on your model!
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Please note:
21
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Transport and Installation
5 Transport and Installation
5.1 Transport
In order to avoid damage, ERGO-FIT machines are transported by ERGO-FIT GmbH & Co. KG directly or by an authorized freight forwarding company. After delivery, packaging will be collected and disposed by ERGO-FIT GmbH & Co. KG. If ERGOFIT machines are delivered by a freight forwarder, the customer must dispose the packaging himself or may send it back to ERGO-FIT GmbH & Co. KG. (transportation costs are on behalf of the customer). The machines do not have any shipping locks!
5.1.1 CIRCLE
In order to avoid transport damages the CIRCLE frame cover will be delivered separately and must be attached subsequently. Use the provided rounded head screws ISO 7380 M8 x 20 (4), washers DIN 125 Ø 8,4 (4) and Allen wrench SW 5 (1) for proper attachment. Bring the machine to its dedicated location:
1. Stand behind the machine so that you can see the display.
2. With both hands, grasp the machine at the lower frame an lift it slightly. You can now easily roll it to the intended position.
3. Place the cover on the frame and align the holes with the frame threads. I nsert t he pr ov ide d ro unded hea d screws ISO 7380 M8 x 20 and the washers DIN 125 Ø 8,4, (see figure) and tighten them with the Allen wrench SW 5 in order to attach the cover.
5.1.2 CROSS
1. Stand behind the machine so that you can see the display.
2. Grasp the bottom side of the machine and lift it slightly. You can now easily roll it to the intended position.
3. Please make sure that the center foot is securely positioned on the floor for a safe stand of the machine
22
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
5.1.3 CYCLE
1. Position yourself so that you can see the rear of the display.
2. Grasp the handlebar with both hands and slightly lift the machine forward. You can now easily roll it to the intended position.
3. Do not lift the machine by its seat to avoid damaging the pneumatic spring.
4. For transportation up or down stairs or similar obstacles use the bottom tubes of the base frame.
5.1.4 MIX
In order to avoid transport damages the MIX 4000 CIRCLE has a foldable display holder. Use the provided rounded head screw ISO 7380 M8 x 20 (1) and washer DIN 125 Ø 8,4 for proper attachment. Bring the machine to its dedicated location:
1. Position yourself so that you can see the rear of the display.
2. Grasp the foot rest surfaces with both hands and slightly lift the machine. You can now easily roll it to the intended position.
3. Make sure to leave enough space behind the machine (approx. 40 - 45 cm) so that the user can easily adjust the backrest.
4. At the lower end of the monitor bracket you will find a hinge. Release the screw at the hinge to avoid damages. Then bring the monitor bracket into its training position.
Insert the supplied rounded head screw ISO 7380 M8 x 20 and the nut DIN 125 Ø
8,4 as illustrated below.
5. Stand on the control panel side (you look on the display) and check if the display functions properly. If this is not the case, make sure you followed the steps above correctly. In addition, verify if the socket is live.
23
Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Transport and Installation
First tighten the hinge screw and then the rounded head screw to fasten the
monitor bracket.
5.1.5 RECUMBENT
1. Position yourself so that you can see the display.
2. Lock the seat of your exercise machine in the rearmost position.
3. Grasp the seat with one hand and the guide bar with the other. Lift the machine slightly. You can now easily roll it to the intended position.
4. Once the machine is in its intended position, it is absolutely necessary to adjust the foot (see chapter 5.6.5) since it is the machine‘s center support.
5.1.6 STAIR
1. Position yourself so that you can see the display.
2. Grasp the bottom side of the lateral support bars with both hands. You can now easily roll the machine to the intended position.
5.1.7 TR AC
Machine installation and setup should always be performed directly by ERGO-FIT or by an authorized service technician. This guarantees for a safe and proper operation.
1. Inspect the running belt af ter setup or relocation and adjust it if necessary (see maintenance guidelines in chapter 9.1.7). The belt should always be centered between the two shafts.
2. For safety reasons, make sure to leave enough space behind the machine (2 m length and 1 m width). Cover this area with a gym mat or a similar material.
24
Loading...
+ 116 hidden pages