Ergear EGSS7 Instruction Manual

Monitor Desk Mount

Instruction Manual

V1.0

Model: EGSS7

Thank you for choosing this Ergear product! At Ergear we strive to
provide you with the best quality products and services in the
industry. Should you have any issues, please don't hesitate to
contact at [e-mail] (US/CA/DE/UK/FR/IT/ES/AU)

IMPORTANT SAFETY INFORMATION

Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact our
customer service at [e-mail].

CAUTION: Avoid potential personal injuries and property damage!

• Do not use this product for any purpose that is not explicitly specified in this manual.

Do not exceed weight capacity. We are not liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.

• This product contains a high pressure gas spring, fire and percussion prohibited. Also

it is strictly prohibited to dismantle without professionals. Please return to the
manufacturer or hand over to professional agencies if the product is abandoned.

• The desk must be capable of supporting three times the weight of the total load (the
mount, the monitor and all accessories weight). Don't use the product on particle board.

Weight Restrictions

WARNING

4.4-14.3 lbs.
(2.0-6.5 kg)

If your TV weighs more, this
mount is NOT compatible.

DO NOT exceed the maximum weight indicated.
This mounting system is intended for use only with
the maximum weights indicated. Use with products
heavier than the maximum weights indicated may
result in failure of the mount and its accessories,
causing possible damage and or injury.

Check the VESA Pattern of Your Monitor before You Begin the Installation

MAX:100

mm/4 in.

mm/4 in.

MAX:100

MAX:100

If your monitor VESA is greater than 100x100 mm/4x4 in. or less than
VESA 75x75mm/3x3in., this mount is NOT compatible.

If this desk mount is NOT compatible, please contact customer service

at [e-mail] to find a compatible product.

mm/4 in.

75 mm ≈ 3 in.
100 mm ≈ 4 in.

Minimum VESA pattern:
75mm/3 in.(W)x75mm/3 in.(H)

01

Product Features

(9.8 in.)

(0.39~3.54 in.)

(0.39~3.54 in.)

02 03 04 05 06 07 08 09 10

TENSION ADJUSTMENT SHOULD BE DONE ONLY
AFTER MOUNT INSTALLATION

Do not adjust tension without monitor.

1. Ensure monitor has been attached to the mount.

2. Read your monitor box or manual to find out monitor net weight.

3. Ensure the net weight of monitor (including accessories) is between

4.4~14.3 Ibs (2.0-6.5 kg).

Adjustment Sign

Clockwise to reduce

tension(carry less weight)

Warning!

Counter-clockwise to increase

tension(carry more weight)