EREAGLE Ere-E1S, ERE-E1C, ERE-E1B User Manual

Download

Page 1

User Manual

E1 Series

V112 ED-E1S-TM-01

Intelligent Trail Camera

12M, 1080P/30FPS, IP68, MMS /SMTP

Technology Innovation from EREAGLE

Thank you for purchasing our camera series products.

Before attempting to connect or operate this product, please read these

instructions carefully and keep this manual for future use.

Page 2

CAUTION

1. General Information

1.1. Product introduction

1.2. Feature

1.3. Graphic Illustration

2. Installation and location selection

3. Quick start

3.5. Download the Camera manual and Setup APP

3.6. Guide for the setup menu (in the camera)

4. Advanced Operation

4.1. Mode Description

4.2. Set camera on PC

4.3. Menu operation method

4.4. Shooting mode selection

4.5. Audio settings

4.6. Trigger alarm settings

4.7. Time and date

4.8. Time lapse

4.9. Camera Name

------------------ CATALOG ------------------

2.1. Bandage installation

2.2. Seal the bottom cover 9

2.3. Installation location selection 9

3.1. Battery installation 10

3.2. SD/TF Card installation 10

3.3. SIM Card installation 11

3.4. Enter Test mode and ON mode 11

4.10. Night lighting 20

4.11. Telecommunications 21

4.12. User Interface Stamp 22

- 2 -

Page 3

4.15. SD Card Cycle

4.16. Default Setup

4.17. Software Version Information

4.18. View, Delete the image and video

4.19. Auto power off

4.20. Laser positioning

4.21. Quick setting Photo and video

4.22. Low power alert

4.22. Software version updates

5. Other operation

5.1. Connection of external power

5.2. USB cable use

6. Warranty Information

7. Appendix Technical Specification

8. Packing list

9. Dimension

4.13. Password 22

4.14. SD/TF Card Format 23

5.3. TV Video Cable Use 27

5.4. TF card capacity data sheet 28

RoHS 34

- 3 -

Page 4

This equipment has been tested and found to comply with limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

WARNING: Changes or modifications not expressly approved by the manufacturer

could void the user's authority to operate the equipment.

WARNING: To prevent electric shock and risk of fire hazards:

● Do NOT use power sources other than that specified.

Termly Inspection

Please refer inspection to accredited service person.

Do NOT install on weak upholder

Install on strong enough upholder, or may fall off or cause other hazards.

Keep off inflammable gas or liquid

May cause risk of fire hazards or else.

Do not exceed the limit of temperatures using the camera

The normally working temperature of the camera is -30°C~+70°C, once used in high temperature conditions, please pay attention to ventilation.

Do not let the camera suffered shock

will lead to the camera failure.

Do not let the camera is radiated By the radioactive substances

If the camera is exposure to the radioactive environment, will damage the CMOS of the camera

Do not remove camera privately

Will lead to damage the internal structure or components, or risk of fire, electric shock, or the other dangerous.

Please install the batteries with the correct polarity Do not use the old and new batteries together

Will lead the camera with malfunction and the battery leakage.

- 4 -

Page 5

1. General Information

1.1. Product introduction

The Ereagle tr ail camera is a smart IR surveillance waterproof device. It can take high quality photo (up to 12M pixels(Interpolated), real 5M pixels and video automatically with the preset parameter by customer, triggered by any movement of the human being and animal by the highly sensitive PIR sensor. The double D/N filter IR cut switcher helps while the ray of light is not good and then take clearer photos and videos.

There is one 2.0” color LCD display screen and sound recorder, it can check whether the photo area is reasonable by inner laser light and check photo and video at any time.

With it’s high waterproof grade of IP68, Ereagle trail camera can be used in outdoor.

The model Ere-E1S can automatically send pictures or text messages to the specified user’s phone or mailbox. Users can also set the maximum number of messages sent per day to control the message cost.

1.2. Feature

 Built-in 2G GSM wireless image transmission function, SMS / MMS / E-mail(SSL) are optional.  Support daily report SMS notification, Support low-power SMS notification.  Support four frequency band quad-band: 850/900/1800 / 1900mhz.  With 1/3” high definition 5MP image sensor, Low illumination:0.1Lux (LED off)  7.45mm fixed lens. (H FOV=50°, F3.0)  Photo definition can be optional with 12M/8M/5M/3M/2M/1M, Support shooting maximum 5 photos  1080P/30fps full HD video recording, 1080P/720P/480P is optional  The G. 726 audio compression method, to make real-time monitoring  Support both photo and video mode, auto make video after the photo shooting, more convenient

observation at the scene.

 With double infrared detectors, Pre detection and capture detection work together to make detection

range wider and capture more accurate.

 Multiple PIR sensor design make the sensing distance 20 m / 65.62 feet, induction higher sensitivity,

more accurat e.

 PIR shortest trigger time can reach: 0.8 seconds.  PIR main induction angle 45 degrees, on both sides of the sensor PIR Angle is 100degrees.  Precision processing structure, waterproof level of IP68 (dust tight/flooding); Camouflage design.  Support stamp of device name, time, temperature and moon phase.  Support time taking pictures function, can set a day in three periods and time intervals, and can choose

week repeat.

 Support capture at night, Invisible infrared light, makes the effective distance of 20 meters; Light

intensity is adjustable.

 Built-in high-definition infrared cut, makes the shooting photo more real and gorgeous, switch more

stable and reliable.

 4 x AA / 8 x AA / 12 x AA group of alkaline battery can be optional, maximum standby working time can

be up to ten months.

 Support 1.2V / 1.5V / 3.2V / 3.7V various specifications rechargeable batteries.  Support electronic protection against reverse battery, so as not to damage the camera.  2.0” high resolution color LCD display screen; Adopt multi-function remote button, control more

convenient and quickly.

 Support USB data connection and PC fast parameter settings.  Support external power supply or solar power, to provide longer working hours.  Support dismantling chains, protection lock and password protection function, to protect the camera

sa fet y.

 Support low power alert.  Support TF card with maximum capacity of 64G.  Support the laser alignment, to make more convenient installation.

- 5 -

Page 6

1.3. Graphic Illustration

St rap Hole

IR LED

Le ns

Side P I R

Lock Hol e

S afe-Gu ard

L oc k Hole

A nt iskid

Mai n PIR

Ante nna Port

Sta tus LED

La se r Pointe r

Nigh t Sens or

Microphon e

Sea l ing B u ck le

．Lens

It is used for collecting the video and image information of the detect target.

．Main PIR

It is used for inducting the moving objects of the heat resource, then trigger and take photos and video.

．Side PIR

Induce the border of heat resource.

．Microphone

Used for collecting the sound information.

．Laser Pointer

For position adjusting during the camera installation.

．IR LED

Provide light for night shooting.

．Status LED

The hints of camera state and trigger.

．Light Sensor

Induction of light intensity, trigger the camera into the day and night mode.

．Lock Hole

Lock the bottom cover, waterproof, dust-proof. Prevent malicious removal.

10．Safe-Guard Lock Hole

Anti-theft device

．Antiskid

．Strap Hole

．Antenna Port

- 6 -

Page 7

TF Por t

USB Port

DC Port

Test/O N/OFF

Swi tc hes

SIM Port

．DC Part.

Used for external power supply, support DC 6V/2A power supply connection.

．USB Part

connect PC with USB cable.

．TF Part

To store video, image and data information.

．SIM Part

GSM communication card for transmitting or receiving text image information.

．TEST/ON/OFF Switches

Include Test mode, ON mode and OFF mode.

Page 8

Spe ak er

Men u Butto n

LCD Di sp lay

Vi ew Bu tto n

．LCD Display

For viewing video and image information and menu display.

．View Button

For viewing video and image information.

．Menu Button

For menu setting operation.

．Speaker

Play video sound.

Page 9

2. Installation and location selection

2.1. Bandage installation

The camera is designed with a bandage hole for fixing the camera. Thread the bandage from one side to another side of the hole, then fix the bandage in a solid trunk of the tree, you can adjust the tension of bandage to adjust the camera position, tighten it after the adjustment.

2.2. Seal the bottom cover

Camera is sealed with 20mm high-strength elastic metal buckle, after installation and testing, please make sure the bottom cover locked firmly to ensure that the camera with good waterproof, dustproof performance.

Note that the metal buckle should be fixed within raised part and then locked firmly.

2.3. Installation location selection

Selection of camera location see below.

After selecting shooting place, fix the camera on the thick trunk with the bandage and adjust the induction angle.

When finishing, shake the camera to see whether firm enough. If fixed in the wall, you need to install the matched mounting bracket by standard British screw holes.

The camera is installed on a relatively thick tree or on the wall, To keep the proper height when fixed, so that it can shoot the corresponding action target. Avoid direct sunlight on camera lens.

Page 10

TF CARD SIM CARD

USBTV

OFF TEST ON

DC 6V

TF CARD SIM CARD

USBTV

OFF TEST ON

DC 6V

3. Quick start

According to the instruction of above parts, operate the corresponding button, then you can complete the basic operation.

3.1. Battery installation

Prepare 4 x AA / 8 x AA / 12 x AA group of alkaline batteries, a group needs at least 4 x AA alkaline batteries.

Open the camera bottom cover, unlock the battery cover plate, to put the alkaline batteries in the battery box according to the polarity marked on the battery cover correctly , then close the battery cover.

3.2. TF Card installation

After the battery is installation, insert the TF card to the right direction, make sure the TF card is unlocked before installation. (We recommend using C10 standard Sandisk brand TF card)

3.3. SIM Card installation

After TF card is installed, insert the SIM card correctly according to the specified direction, support the four bands: 850/900/1800 / 1900mhz.

Page 11

3.4. Enter Test mode and ON mode

There are three mode for the switch, OFF, TEST and ON mode.

：When the switch to the OFF position, the camera will be power off automatically.

OFF

：When the switch to the TEST position, the camera enters the preview test status, you can

TEST

manually start taking pictures, record videos, view photos and videos, set the parameters and so on. With this mode, you can also test the induction area of the PIR: When fix the camera into this mode, the user can walk slowly right in front of the camera from 3 to 20 meters. When the blue LED indicator light flashes, means this location can be inducted by the main PIR. When red LED flashes, means this position can be inducted by the side PIR. There are three status under test mode: Preview status (on the LCD screen or TV screen, you can see the curre nt camera image in f ront of the lens), Setting status (enter the parameter setting menu) and Playback status (In the LCD screen or TV, you can see the images from the SD card). After turned on with test mode, the camera automatically enters into preview status. ON: also called automatic infrared shooting mode. When the switch to the ON position, the camera enters On mode. When entering this mode, the system will wait about 10 seconds, at the same time the red LED flashes, then goes out after that and goes into induction shooting state. After entering this mode, the system will automatically shooting based on your setup parameters, when the person or animal enters the monitoring area.

3.5. Download the Camera manual and Setup APP

Press“MENU” to set enter the setting menu.

Press “UP” and “DOWN” to move to Version setting, and press“MENU”to enter the sub-menu.

Press “UP” and “DOWN” to move to the Download Documents options, press“MENU ”to start downloading .

"Download success" will appear on the screen. Files will be automatically saved in SD card.

The above is a simple operation. For mor e detailed instruction, Please refer to the instructi on at the later Advanced Settings.

Page 12

Items

3.5. Guide for the setup menu (in the camera)

The following description is mainly for the use of menu parameters.

Main

Sub Items Function and Application

Select Network Operators

【OFF】: Turn off the remote communication function. In this mode all

MMS/SMTP Setting

Camera Set

Send Mode

MMS/SMTP Parameter

Send Number

Daily Report

Mode

Image Size

Video Size

Shooting No.

Video Length

Max Shooting

communication related functions are invalid. 【MMS】: Trigger to send the picture to the user via MMS. Can send to up to 3 mobile phone users and a mailbox user at the same time.. 【GPRS】: Trigger to send pictures to users via email, support SSL encryption. Can send to up to 3 mailbox users at the same time.

It is used to Setting MMS/SMTP related Parameter and receiver information.

The setting is used to limit the maximum number of messages sent per day, set to "0" means no limit, maximum limit of 255. By setting the limit can effectively control the cost of sending information. The limit does not affect the triggering of the photo, only limit the number of messages sent.

The setting is turned on, the user will receive a text message at 9:00 AM every morning in time, in order to know the current state of the camera (including power, signal, version, TF card information, etc. ).

Select the camera mode to suit different shooting situations and application

【Camera】：Used only for scene that only take photos after triggering. 【Video】：Used only for scenes that require recording after triggering. 【CAM+Video】:Used for scenes both need to take pictures and video

after triggering. In this model, it takes picture first, and then makes records.

You can select definition of the picture taken, the higher the definition, more storage space it occupies. The user can select the appropriate resolution according to the size of the SD/TF card

【12M】：4608×2592 Pixel；【8M】：3624×2448 Pixel；【5M】：2560×1920 Pixel；【3M】：2048×1536 Pixel；【2M】：1920×1080 Pixel；【1M】：1280×720 Pixel；

Select the video resolution, the higher definition will occupy more storage space.

【1080P】：1920×1080 / 30fps；【720P/60】：1280×720 / 60fps 【720P/30】：1280×720 / 30fps；【480P】：720×480 / 60fps

This parameter indicates that you can take multiple shots continually after the trigger,the maximum shooting number can be 5. 1~5：The number of consecutive snapshots

Set the length of the recording, can set from 1 to 120 seconds, the maximum length is 120 seconds.

Set the shooting limit per day, the maximum limit is 255 times, set to 0: means no limit.

Page 13

accurate detection target

al input date and time, year, month, day, minute and second can be

Audio

Audio Record This setting is used to turn on or off sound while recording

Boot Sound Set whether the start beep is turned on or off.

Key Sound Set whether to turn on or off the key beep.

PIR Mode

Parameter PIR

Sensitivity

Interval

Time format Set the time display format. 12 hours (eg AM 8:00) / 24 hours (eg 15:30)

Time and Date

Date format

Setup time

Time Zone Settings

Select PIR trigger mode, you can use Main PIR trigger or Side PIR + Main PIR trigger mode. 【Main PIR Trigger】: This is the most common trigger mode. In this mode, only the Main PIR can trigger the shooting and the Side PIR is disabled. [Side PIR + Main PIR trigger]: This mode is mainly used to capture fast speed of the heat source objects. In this mode, the Side PIR trigger will pre-start the camera to speed up the boot speed; Then it captures immediately when Main PIR triggers. [OFF]: turn off the PIR trigger, PIR will stop working, no longer detect.

Select a different PIR trigger sensitivity. 【Auto】: automatically adjusts the PIR sensitivity according to the change of ambient temperature. In this mode, it can adapt the different working environments, and it triggers in high accuracy, low error shooting. 【High】: for small temperature changes, small hot air flow environments, detect of small mobile objects or long-range detection. At the same time because of the high sensitivity, certain error shooting may happen.

【Medium】: Suitable for normal capture environment. 【Low】: Suitable for environment of closer detection distance and

The time interval between the trigger and the next trigger. Set from 1 to 59 seconds, 1 to 60 minutes. This setting is mainly used to control the frequency of shooting, it will help reduce the same scene of repeated shooting.

Set the date format. Available in three formats: 2008-12-23; 2008/12/23; 2008/23/12

Manu adjusted.

Set the time zone in different countries to correct the time; usually set time zone while setting the NTP. When you set the time manually, you do not need to enter a time zone.

Page 14

Timer

Timer Set

Time Lapse

Time 1 Time period 1 setting per day. For example: 1: 20: 20 ~ 7: 30: 20

Time 2 Time period 2 settings per day.

Time 3 Time period 3 settings per day.

Repeat

Camera Name Used to set the camera name.

Night vision

Night vision mode

Light Level

User Interface

Camera Name

Stamp

Shooting Date

Temperature

Moon Phase

This option controls whether shooting is triggered on or off for the set time period.

Turns on or off interval timer. When this setting is turned on, the PIR will stop triggering. [Interval shooting time]: Take pictures by the time it set, not effect by PIR trigger effect . Setting range: 00: 00: 00 to 23:59 :59

Select the days per week according to the time set above to shoot for trigger shooting. multi-select

【Auto】: the camera will automatically recognize the day or night, automatically select Off / On fill light and switch the image mode color / black and white. 【Day】: The camera has been kept in daytime color image mode, fill light is not enabled. 【Night】: The camera has been in the night black and white image mode, fill light is enabled.

【Standard】: The IR LED current to 900mA. 【Plus】: The IR LED curr ent to 1300mA.

Used to turn on / off whether name information is displayed on pictures and videos

Used to turn on / off whether time information is displayed on pictures and videos.

Used to turn on / off whether temperature information is displayed on pictures and videos

Used to turn on / off whether moon phase information is displayed on pictures and videos

Page 15

Password

SD Card Format

SD Card Cycle

Default

Version

Download Documents

Type Displays the camera model information.

Firmware Displays the software information for this camera.

When Password is on, the camera needs to input a password to enter in test mode. After opening the password, the camera itself has a default password, in order to ensure security, it is recommended that users re-enter the new password and password confirmation.

Used to format the SD card, the operation will automatically clear all the SD card images and video data.

When this sett ing is on, new pictures or videos will automatically overwrite older pictures and videos when the SD card has insufficient storage space.

This operation will restore all the camera parameters to the factory default settings. It is recommended that you perform this operation if the camera is not working properly.

The camera will automatically download the camera's corresponding manual, software and other files to the SD card, the user can copy the files to the computer from the SD card.

Page 16

4. Advanced Operation

4.1. Mode Description

 Test Mode

Enter this mode, the red light flashes, the camera automatically enter the real-time preview interface. After the system automatically detects with normal status the indicator lights will turn off.

After a few seconds, the PIR status can be observed by the color of the flashing indicator. Red indicates the side PIR is triggered and blue indicates the main PIR is triggered.

If the camera is password protected, you need to input password to enter the preview interface.

Following Operation can be performed in this mode:

View video and images: You can enter by pressing the button to view the screen the shooting screen detail.

Parameter settings: Enter the menu button to set parameters. Laser positioning: in this mode press the Left direction button to open the laser alignment, to check

the installation position of the camera.

Shooting test: Press Right direction button to take images and video in test mode. Quick Setup: Press UP and Down direction button to quickly switch camera mode and video mode. PIR detection hint: Support PIR detection indication in this mode.

Boot screen Real Time Screen

Shooting mode and definition are displayed at the upper left corner of the screen.

Upper right corner it shows the battery level; when the battery is less than 20%, the icon turns red.

The screen below displays the status of the SD card; Without SD card, the icon is displayed in red and will give alarm. The bottom right display total photos quantity, the taken photo quantity and the remaining video recording time.

In this mode the camera does not take photos f or detected heat source object, only LED indicator hints.

Page 17

 ON Mode

Enter this mode, the indicator light starts blinking .Then the system starts the internal self-test and enters a low-power consumption standby state after that, the LED turns off.

In this mode the camera will enter the normal working condition, starting PIR detecting.

When the side PIR is triggered, the camera starts pre-starting,not shooting photos; Only when the PIR is triggered, can the camera automatically and quickly shoot and store the images.

In order not to affect the detected heat source obj ect, in this mode the camera would be no li ght hint, also no visible light and noise.

4.2. Set camera on PC

For multi camera parameter settings rapidly, users not only can set through its own menu on the camera, but also can set parameters via PC setting software.

PC-side software is stored in the camera menu, can be downloaded through the menu operation to the SD card. The latest updates software are available on the EREAGLE website.

Setting steps:

1. First of all, click "Download documents" in the camera menu “version” option, the camera manual and PC-side software will be automatically stored in the SD / TF card. PC-side software contains "Set APP", respectively for camera parameters and communication parameter settings.

2. Use the USB cable to connect the camera to the PC, find the appropriate software in the SD card on the PC and open it, then install it.

3. Open the settings software, select the product model, select the storage location for the camera in the SD card root directory.

4. Set the corresponding camera parameters and communication parameters according to your need.

5. After setting, click to generate the configuration file, the parameter configuration file will be automatically stored in the camera SD card.

6. Disconnect the USB cable, restart the camera, the parameter settings complete.

The copy of Generated configuration files t o the SD card is still valid.

Language and model selection interface

Page 18

General parameter setting interface

MMS setting in terface

Page 19

4.3. Menu operation method

Users can enter the menu and set parameters in the camera test mode; Alternatively, use PC-side

software for par ameter setting s.

Setting method:

1．Press the "MENU" button to pop up the setup menu. 2．Press "UP" and "DOWN" to move the cursor to select the corresponding option or parameter. Press

"MENU" or "RIGHT" key to enter the submenu or save the setting.

3．Press "LEFT" key t o return to the previous menu. Press "VIEW" key to save and exit the menu. 4．Press "LEFT" and "RIGHT" to select the input position, press "UP" and "DOWN" to select the number to

be input. Press "MENU" or "VIEW" to save and exit the menu.

5．Press the "LEFT" and "RIGHT" keys to move the cursor up and down while pressing the "UP" and

"DOWN" keys to enter the current character. Press the "VIEW" key to save and exit the menu.

4.4. Shooting mode selection

The camera supports 3 shooting modes, camera mode, video mode, camera + video mode.

Image parameters: User can choose the size of shooting pictures, continuous shooting number and other parameters. Video parameters: User can set the recording video definition, maximally 1080P/30FPS. You can also set the video length. Shooting Limit: User can control the shooting numbers per day by this setting, to reduce the power consumption.

Mode Single selection

Image size Single selection

Camera Set

Video Size Single selection

Shooting No. Number 1~5 number of photos taken continuously 1

Button Menu

Camera camera only default

Video video only

Camera+Video Camera first, video second

12M 4608×2592

8M 3624×2448 default

5M 2560×1920

3M 2048×1536

2M 1920×1080

1M 1280×720

1080P 1920×1080 default

720P/60 1280×720

720P/30 1280×720

480P 720×480

Page 20

MM/DD/YYYY

11/6/2014

default

Video Length time 1~120s Video recording length of time, unit: second 10s

Max Shooting Number 0~255 Limit the number of daily shooting, 0 means no limit. 0

4.5. Audio settings

This function is used to for sound recording, turn on and off for button and power-on tone.

Audio Record

Audio

Boot Sound

Key Sound

4.6. Trigger alarm settings

Our camera inclu des pre-sensor PIR and shooting PIR.When the heat source moves the object into the PIR pre-induction area, the camera immediately enters the start-up state; when the shooting PIR is triggered, the camera quickly shoot. This method can be more accurately capture the target object. Users can adjust the trigger interval and induction sensitivity according to the frequency of animal activity, this can prevent repeated capture and get the more accurate data.

PIR Mode Single selection

Sensitivity Single selection Auto

Alarm trigger

Interval Number

4.7. Time and date

Set time and date, to be local time synchronization, in order to accurately capture the target activity time. So before use the camera, please set the time and date according to local accurate time and date.

Manual setting: The user can directly set the date and time in the menu. You can also set the date and

time display format.

Auto Acquisition Time & Date: The camera automatically obtains the time and date via the Internet

after each start. This function needs to set NTP parameters.

Time Format Single selection

Time

and

Date Format Single selection

Date

Setup Time date and time

Automatic acquisition time and date is o nly for mms camera ERE-E1S The date and time set manually will be los t when the battery taken out for 20 seconds.

ON Open to record audio and video Sync default

Single

selection

OFF OFF

ON Open the boot sound default

Single

selection

OFF OFF

ON Open the buttons hint sound default

Single

selection

OFF OFF

Main PIR Only open Main PIR Main&Side PIR Open Main and side PIR default OFF All OFF

Low lowest Normal normal High highest

0sec-59min

12hours display： 6:42:54pm 24hours display：18:42:54 default YYYY-MM-DD 2014-11-6

DD/MM/YYYY 6/11/2014 2014-11-6 18:42:54

According to the environmental temperature automatic adjustment

the interval of next trigger after the previous trigger.

If you need to manually set the date and time, please set Auto off.

default

One min

Page 21

OFF

Close timer function

default

00:00:00

start time

00:00:00

start time

00:00:00

start time

Monday

√

Wednesday

√

Friday

√

Sunday

√

4.8. Time lapse

This feature allows the camera automatically record images or videos at specified time intervals for a

specified number of days and time periods. You can set three time periods per day and weekly repeat.

Timed Trigger Shooting: Users can set the time period to work every day after the timer shooting is started. Up to three time slots can be set per day, and week repeat can be selected. This setting will trigger and shooting only within the set time period.

Automatic timer shooting: In addition to setting the time period, you also need to open the shooting interval and set the interval time. In this setting, the camera will automatically take the image according to the shooting interval

timer

Time Lapse Time 0~60min

Timer1 Time interval

Timer2 Time interval

Timer

Timer3 Time interval

Repeat

Single selection

multiple selection

When time lapse is ON, The interval can’t be set to “ 0”and PIR trigger is invalid.

4.9. Camera Name

This parameter is used to set the name of the camera, in order to accurately get the camera information. The name will be stamped on the photo and video.

Setting the camera name can help to mark the camera installation position.

Camera Name character 24 characters I t is made up of Numbers, letters and characters.

ON Start timer function

If the timer lapse is 0, it is PIR induction mode

00:00:00 end time

Tuesday √

Thursday √

Saturday √

The selected effect

Page 22

Auto

Auto detect day and night mode

Default

Night

Always on night mode

Select Network Operators

SMTP

Send by Email

sent per day. Bit 0 is not restricted.

OFF

Don’t send

Default

SMTPS Parameter

It is used to Setting SMTP related Parameter and receiver information.

OFF

Not support

Default

4.10. Night lighting

This setting helps to improve the effect of insufficient light illumination change at sunrise and sunset. Correct setting of this parameter can improve the shooting effect. Here you can set the day/night automatic switching, night mode or day mode. In night mode, you can also set the light level to control the photo brightness. We provide three different lighting source, the user can choose according to your need 940nm invisible infrared light source: high power invisible light source, ultra-low red exposure, night vision distance can reach up to 30 meters. 850nm invisible infrared light source: high power invisible light source, visible red exposure, night vision distance more than 40 meters. 650nm visible white light source: high-power white light source, visible white light, night vision distance more than 30 meters.

Night Vision Mode Single selection

Night

Vision

Light Level Single selection

4.11. Telecommunications

When the PIR trigger shooting, the camera will automatically send SMS(short messages), MMS or e-mail to the specified recipient. Our camera supports 3 different transmission methods.

Day Always on day mode

Standard The IR LED current to 900mA. Default Plus The IR LED current to 130 0mA.

SMS: by sending text messages to the phone to notify the user.

MMS: by sending pictures to the phone to notify the user. You need to set the MMS parameters and

receiver information correctly.

GPRS: by sending pictures to the mailbox to notify the user. You need to set the SMTP parameters and recipient information correctly.

Off: Close all communication related functions.

MMS Send by MMS

Send Mode

Send Number Digital 0~255

GSM

Setting

Daily Report

MMS Parameter It is used to Setting MMS related Parameter and receiver information.

Remote control

single selection

OFF Turn off Communication Default

ON Send 1 daily report per day

single selection

ON support

Single selection

Limit the maximum number of messages

Page 23

Send Number: This function is mainly used to limit the number of messages sent by the camera every day, which helps the user to control the cost. When the function is not set to 0, the interval is 10 minutes after each message is sent, and the message can not be sent again after the trigger shooting. To prevent duplication of information and waste the cost. Daily Report: The camera send the current data report of the camera to the specified user as a text message every day. Including: power information, signal strength, temperature, storage capacity information, the number of photos and videos.

MMS parameter: It is used to Setting MMS related Parameter and receiver information. SMTP parameter: It is used to Setting SMTP related Parameter and receiver information.

Support SSL (Security socket Layer) Remote control: not supported.

You must insert a valid SIM card when using the communication f unction. When communication function is open, you must use the PC-side MMS Set software correctl y set the relevant parameters in order to ensure cam era communication function works .

4.12. User Interface Stamp

Open the User Interface Stamp, the camera I D, Shooting Date, Temperature and Moon phase will be displayed on the corresponding pictures taken.

User Interface

Stamp

Single selection

4.13. Password

Password protection is to increase security of camera par ameters. You should input the correct password after you open the password protection function.

Password

Password Single selection

Password setup digit 1111 Make up of four numbers from 0 to 9 1111

4.14. TF Card Format

Format TF card。

This operation will lose the TF card, be careful.

ON Stamp Default

OFF No stamp

ON Open password protection

OFF Close password protection Default

Page 24

4.15. TF Card Cycle

After starting the TF Card Cycle, when TF card memory is full, the new recorded file will automatically overwrite the old file.

4.16. Default Setup

For error of the parameter settings, the device will restore all settings to factory default settings.

This operation will make the camera autom atically shut down, need to restart the camera to restore the factory Settings to take effect.

4.17. Software Version Information

Displays the camera's current firmware version number.

Camera data download, including instructions, PC-side software.

4.18. View, Delete the image and video

1．Press "VIEW" key to enter into view mode, the image and video thumbnails will be displayed on the

screen.

2．Choose "UP", "DOWN" and "LEFT" "RIGHT" keys, then press "MENU" to display the selected picture

or video in full screen.

3．In full screen, press the "LEFT" and "RIGHT" buttons to switch between the previous or next picture. 4．Press the "UP" key to return to the thumbnail display when full screen is displayed. 5．In full screen, press the "VIEW" button to display the deletion hunt. Press the ”LEFT” and “RIGHT” key

Page 25

to cancel delete or delete all options. Press the "MENU" key to confirm the operation.

6．Press the "MENU" button to enlarge the picture. You can press "UP", "DOWN", "LEFT" and "RIGHT"

keys to zoom in to view the picture details.

7．For videos, press "LEFT" and "RIGHT" key to control the slow-forward and fast-forward speed; Press

"DOWN" key to enter the reverse playback during playback, press "LEFT" and " RIGHT "key to control the slow retreat and rewind speed, press the" UP "key to return to the thumbnail display.

4.19. Auto power off

When the user enters the test mode, the system will automatically power off without any operation within 120 S.

When the battery power is low, the camera will automatically power off.

4.20. Laser positioning

When the user enters the test mode, press the "LEFT" button to turn on the laser light, then press the

"LEFT" button to close.

4.21. Quick setting Photo and video

When the user enters the test mode, press the "DOWN" button to switch to the camera mode, press

the "UP" button to switch to the video mode; press the "RIGHT" button to shoot.

4.22. Low power alert

If the camera battery power is less than 20%, when you enter the test interface,it will remind a low

power alert, the speaker will give alarm, battery icon turns red.

When the battery voltage is less than 4.2 V, the camera will automatically turn off.

4.23. Software version updates

User can view the current device model, code, and software version information in the version information in the menu.

Page 26

If user wants to upgrade to the latest firmware version, you need to download the latest version of the corresponding software upgrade package from our official website. Then extract the firmware. bin file in the folder to the SD/TF card, insert the SD/TF card into the camera, and then switch to test mode. The camera will automatically enter the upgrade program, turn off the camera and remove the SD/TF card after finishing, and then change the SD/TF card without software upgrade package.

Page 27

Mi ni U SB

USB

5. Other operation

5.1. Connection of external power

There is an external power input interface at the bottom of the camera, you can use the external power supply to charge, For example, solar battery, DC power supply, storage batteries and so on. External power supply must be with DC 6V 2A The bottom of the waterproof cover will be opened for external power supply, so the camera waterproof grade will be reduced. The camera can’t be inverted installation, not even put in the water at this time.

When purchasing power supply, please note that the rated vo ltage, current, power connector and polarity.

Polarity of power interface

5.2 USB cable use

Connect the USB cable to the USB port on the PC, the PC will automatically recognize and install the camera driver. When the recognition is complete, the mobile disk will appear in the computer. At this point the user can copy file from the mobile disk and delete the file. USB cable can be directly used for PC-side software to set the camera parameters.

Page 28

5.3. TV Video Cable Use

The video cable is used to connect the camera to a TV or monitor, making it easy to view pictures or videos on a larger screen.

Plug the video RCA cable into the AV input of the TV or monitor, and connect the other end to the camera AV connector.

Switch the TV or monitor signal input to AV mode and turn on the camera to display live video or view pictures and videos on your TV.

Some cameras may need to be set to the TV mode to display the image. Since the AV output quality is limited to 752 * 576 pixels, play the videos and pictures It will be lower than the actual resolution while playing the video and phot os. So please don’t be mistaken for a lack of definition of the camera.

Page 29

16G

14.9G

242分20秒

3.725G

30分18秒

16G

14.9G

121分13秒

5.4. TF card capacity data sheet

Data sheet below will show you the capacity of different size of SD card.Then you will know which size of SD card fit your need.

Resolution Pixel File size TF Card Capacity Picture amount

4G 3.725G 21100

1M 1280×720 176K

2M 1920×1080 384K

3M 2048×1536 512K

5M 2560×1920 896K

8M 3624×2448 1408K

12M 4608×2592 2176K

Resolution Pixel

480P

720P

720P60

1080P

720×480

60FPS

1280×720

30FPS

1280×720

60FPS

1920×1080

30FPS

Photo storage sheet

File size

/Sec

1024K

2048K

Video storage sheet

8G 7.45G 42350

16G 14.9G 84600

32G 29.8G 169300

4G 3.725G 9700

8G 7.45G 19400

16G 14.9G 38800

32G 29.8G 77600

4G 3.725G 7270

8G 7.45G 14500

16G 14.9G 29100

32G 29.8G 58200

4G 3.725G 4150

8G 7.45G 8300

16G 14.9G 16600

32G 29.8G 33200

4G 3.725G 2640

8G 7.45G 5290

16G 14.9G 10580

32G 29.8G 21160

4G 3.725G 1710

8G 7.45G 3420

16G 14.9G 6840

32G 29.8G 13690

TF Card Capacity Video length

4G 3.725G 60 分 36 秒 8G 7.45G 121 分 12 秒

32G 29.8G 485 分 2 秒

4G 3.725G 60 分 36 秒

8G 7.45G 121 分 12 秒 16G 14.9G 242 分 20 秒 32G 29.8G 485 分 2 秒

8G 7.45G 60 分 36 秒 16G 14.9G 121 分 13 秒 32G 29.8G 242 分 30 秒

4G 3.725G 30 分 18 秒

8G 7.45G 60 分 36 秒

32G 29.8G 242 分 30 秒

Page 30

Button doesn’t work

SD card can not be stored

6. Warranty Information

If the camera malfunction, please see the following guide operation, if the malfunction can’t be solved,

please contact our local distributor.

General malfunction Self-test and solution

camera can’t be open

Always black and white image

The camera auto power off in test mode

Abnormal display shows

Image out of focus

Image not displayed when TV cable connect

Password lost

Can not receive SMS, MMS, or mail

Check whether the batteries are installed cor rectly, the external power whether open circuit or not, the SD card capac ity size meets requirement, confirm the switch is not on OFF position.

Check the camera setting is correc t with the corresponding parameter’s setting

Disconnect the power and restart the camera

Check whether the power supply is norm al, or long time no operation on buttons

Check whether screen surface is clean, if under the cond ition of low and high temperature, display screen shows m ay seem a bit dark, It can be automatically recover in normal tem perature.

Whether there is a big shake when shooting camera, you can fix the camera and see the effect.

Check whether the SD card is write prot ected or damaged

Check whether the TV cable connect is correc t or not, and check the TV cable is damage or not.

Press “View” for 3 seconds and enter to set ne w password,then re-burning software.

Check whether the parameters set by the PC soft ware are correct.

Page 31

Sensitivity：

0.005 Lux / F1.2 / 30IRE (LED off)

Lens：

7.45mm HD Fixed Lens （H FOV=50°；F=3.0）

Photo+Video：

View photo and video：

PIR Mode：

Main PIR / Main PIR & Side PIR / OFF

Trigger Interval：

Day/Night Mode：

：

7. Appendix Technical Specification

Model ERE-E1B ERE-E1C ERE-E1S

Photo and video

Audio

PIR

GSM; Support SSL(Security Socket Layer)

Night Vision

User Interface Stamp

Image Sensor： 5Mega pixel 1/3 "HD color CMOS image sensor

Effective pixels： 2560×1920 / 4915.2K

Photo Definition：

Shooting No.： 1~5

Video Definition：

Video length： 1~120s

Trigger Time： < 0.8 Sec

Max-Shooting (Per Day) ： Support, 0~255, 0 means no limit.

Display Screen： 2.0 "LCD Screen; definition: 960 × 480; 16.7M color

Microphone： 60dB High Sensitivity Sound Collection

Loudspeaker： 0.5W（8Ω） Hi-Fi Loudspeaker Audio record： ON/OFF

Boot Sound： ON/OFF

Key Sound： ON/OFF

PIR Sensing Angle：

PIR Sensor Distance： 20M (at 25°C)

PIR Sensitivity： Auto / low / normal / high

Frequency band： No 850/900/1800/1900MHz

GSM Mode： No MMS/GPRS/OFF

MMS Photo Size： No 960x540

Send Number： No 0 to 255,0: No limit

Daily Report： No ON/OFF

Remote Control： No

Light source：

Night Vision Distance： 30M 30M 30M

Light Level： Standard(900mA) / Plus (1300mA)

Security Setting

Support 4 numbers, auto lock the camera if wrongly input the password for 6 times. Padlock installation.

Can set three period of time per day and weekly repetitions. Support automatic interval shooting and timer

Timer

4608×2592/3624X2448/2560×1920/2048×1536/ 1920×1080/1280×720

1920×1080/30 fps；1280×720/60 fps；1280×720/30 fps；

Support thumbnail,16 times enlargement, support video playing, support advanceX2/X4, retreat X2/X4

Side PIR: Left and right light beams form an angle of 140 °, left and right of the five zone, each zone 10 °

850nm or 940nm

2 / 4ea，IR H-LED

Shooting date, Moon phase, Camera ID and Temperature are optional: ON / OFF

12M/8M//5M/3M/2M/1M

720×480/30 fps

First photo, then video

Main PIR: 50 °, 8 zone, each zone 10 °

0-59sec，1-59min Programmable

650nm，2ea

white LED

Auto / Day / Night

Anti-theft lock hole

triggered shooting

850nm or 940nm

2 / 4ea，IR H-LED

Page 32

Storage, Power Supply and Power Consumption

Memory：

4G~64G, TF Card, Class 10

Power supply：

4A×AA /8A×AA /12×AA alkaline batteries or rechargeable batteries（1.2~3.7V）

External Power Input：

DC 6V / 2A

Low Power Alert：

Warning tone while less than 20% of the power，auto power off while voltage less than 4.2V

Power Current：

250 mA（550mA with LED）

Operation Control

Dimension

SD Card Cycle Save： ON/OFF

Stand-by Time： 5~8 months（4A×AA ~ 12×AA）

Auto Power OFF： A uto power off in 120S while no keypad controlling

Standby Current： 400 uA（0.0004 A）

Other

： 5 + 1 joystick button, support PC-side software quickly set

Interface： DC input, SD/TF card、USB、CVBS, mode swi tch

Mounting： Bandage, tripod nail

OperatingTemperature

and Humidity：

Storage Temperature

and Humidity：

Waterproof Grade： IP68(Dust proof /Submerging test)

： 145 x 91 x 78.5mm

Net Wight： 320g

Gross Weight： 520g

Certificate： FCC, CE

-30°C~+70°C / 30% ~ 90%RH

-40°C~+85°C / 0% ~ 90%RH

Page 33

8. Packing list

item Accessories Quantity

1 Camera unit 1

2 USB cable 1

3 Camera bandage 1

4 Warranty card and brief manual 1

Page 34

90mm

145mm

80mm

9. Dimension

Page 35

（

○ ○ ○ ○ ○ ○

To protect the environment of earth, EREAGLE pay more attention to environment in the whole production process, and take various measures to provide customers with more environmentally and friendly product.

Item name

Diode X ○ ○ ○ ○ ○ Resistance X ○ ○ ○ ○ ○

Rigid circuit board X ○ ○ ○ ○ ○ LED ○ ○ ○ ○ ○ ○ Integrated Circuit (IC) ○ ○ ○ ○ ○ ○

Dynamic Random access

memory (DRAM) Capacitance ○ ○ ○ ○ ○ ○ Filter capacitor ○ ○ ○ ○ ○ ○ Filter ○ ○ ○ ○ ○ ○ Socket X ○ ○ ○ ○ ○ Light ○ X ○ ○ ○ ○ Battery ○ ○ ○ ○ ○ ○ Screw ○ ○ ○ ○ ○ ○ Metal shaft ○ ○ ○ ○ ○ ○ Cable ○ ○ ○ ○ ○ ○ Flexible printed circuit ○ ○ ○ ○ ○ ○ microphone ○ ○ ○ ○ ○ ○ inductance X ○ ○ ○ ○ ○ camera lens ○ ○ ○ ○ ○ ○ label ○ ○ ○ ○ ○ ○ carton ○ ○ ○ ○ ○ ○ user manual ○ ○ ○ ○ ○ ○ bubble pack ○ ○ ○ ○ ○ ○ filer ○ ○ ○ ○ ○ ○ rubber ○ ○ ○ ○ ○ ○ keypad ○ ○ ○ ○ ○ ○ electric wire ○ ○ ○ ○ ○ ○ case ○ ○ ○ ○ ○ ○ spring ○ ○ ○ ○ ○ ○ crystal oscillator ○ ○ ○ ○ ○ ○ IC amplifier ○ ○ ○ ○ ○ ○ switch ○ ○ ○ ○ ○ ○

O:indicates that the content of the toxic and hazardous substances in all homogeneous materials of this part is below the limit specified by 11363-2003

SJ/T

X: indicates that the toxic and hazardous substances in at least one of the components of a homogeneous material exceeds the limited requirements

specified by 11363-2003 SJ/T

Note: For the components of the exceed harmful substance, it can’t be replaced as it cannot be achieved due to the global development level, but

EREAGLE are making efforts for the development of alternative technologies.

Lead

Mercury

pb)

○ ○ ○ ○ ○ ○

Toxic and harmful substance or elements

Cadmium

Hg)

Cd)

Hexavalent

Chromium

(Cr6+)

polybrominated

biphenyls

PBB)

polybrominated

diphenyl ethers

PBDE)

Page 36

This marking s hown on the product or it s lit erature, indicat es that it s hould not be dis posed wi th other househol d wastes at the end of its working life. To prevent harm to the environment or human health from uncont rolled was te dispos al, pleas e separat e this from other types of w astes and recycl e it responsi bly to promote the s ustainabl e reuse of material resourc es. Household us ers should c ontact eit her the retailer where they purchased this product, or their l oca l govenment offi ce, for detail s o f where and how they can t ake this item for environmental ly saf e recycli ng. Busi ness users should contac t their suppl ier and check the terms and conditi ons of the purchas e con tract. This product shoul d not be mixed w ith other commerci al wast es for diposal .

(Applicable in the European Union and other European countries with separate collection system)