Assembly instructions
Your guide to producing the instruction leaflet
HARTWELL 2 DOOR WARDROBE
446-368-018
Assembly instructions
H190.9 xW 62.1 x D104cm
Actual product size
Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999IMPORTANT ─ RETAIN FOR FUTURE REFERENCE
Produced in China for Next Retail Ltd.
446-368-018
HARTWELL 2 DOOR WARDROBE
Assembly instructions
Produced in China for Next Retail Ltd.
BEFORE YOU START
not supplied
PH2
not supplied
To View our full furniture range please visit www.next.co.uk
You can write to us at
Home service technicians
If you have a fault with your product please contact our
customer service team on
0333 777 8999.
If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit you
home to assess the fault and repair the product where possible
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on
0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Tools required
Time to assemble wall fixing
Number of people required to assemble
Two persons are required to assemble this item.
Don’ts
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not place hot items (e.g. hot drinks) directly on to the wood
surface. Please make sure you use a placement or coaster.
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well
away from the construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not sit or stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Unwrap all packaging materials and place the components
on top of the carton box or on a clean floor to protect it from
damage.
Do’s
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools
and plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect it from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly
Due to the size of the product we recommend that it is
assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use.
Wipe occasionally with a soft cloth slightly dampened with
water. Then buff with a dry clean soft cloth.
Wood will mellow and change colour over time, we recommend
that ornaments
and items placed on the surface are moved
regularly for the first few months to prevent uneven mellowing.
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
446-368-018
446-368-018
HARTWELL 2 DOOR WARDROBE
Assembly instructions
Produced in China for Next Retail Ltd.
Fittings and parts check list
GETTING TO KNOW YOUR PRODUCT
446-368-018
446-368-018
A
Top panel x 1
J
20mm Screws x 38
B
LH side panel x 1
K
C
RH side panel x 1
L
Brackets x 2
D
Left & Right doors x 2
M
Strap x 1
E
Shelve x 1
N
Screws x 2
F
Bottom framex 1
O
Wedge x 2
G
Drawer box unit
x 1
Up back panels
x 2
Down back panels
x 1
Vertical Bar
x 1
Hanging rail
x 1
Allen Bolt
x 12
Allen key
x 1
H1,H2
I
P
Q
Door hinges x 6
Screws x 12
Handles & Bolts x 4
HARTWELL 2 DOOR WARDROBE
Assembly instructions
Produced in China for Next Retail Ltd.
STEP 1.
STEP 2.
446-368-018
446-368-018
Put the top panel, side panels, bottom frame and shelf panel together like this way and using
12pcs bolt
fixing top panel, shlef panel and bottom frame onto the side panels as show below.
Att ach t he 2pcs up back panels H1 into the groove of vertical bar I and fix them onto the side
20mm screws M. Attach the 1pc down back panel H2 onto the side panels by 20mm
Steps shown as below.
panels by
screws M as well.
HARTWELL 2 DOOR WARDROBE
446-368-018
Assembly instructions
Produced in China for Next Retail Ltd.
STEP 3.
446-368-018
STEP 4.
Attach the door panels onto the side panels. Insert the door hinges into the hinge base on the
side panels then tigthen the screws on the base by screwdriver. See as below.
Put the hanging rail into t he hanging r ail suppor ts inside t he wardrobe, and put t he drawer
into the drawer box.
Pick out 2pcs handles with the bolt and fix them onto the door panels using the screwdriver.
Then pick out 6pcs door hinges and matched 12pcs hinge screws to attach the hinges onto
the door panel. see below.
Pick out another 2pcs handles with the bolt and fix them onto the drawer using the screwdriver.
HARTWELL 2 DOOR WARDROBE
Assembly instructions
Produced in China for Next Retail Ltd.
446-368-018
446-368-018
Wall fixing - if in doubt seek professional advice
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily pull
away from the core
structure
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity w all
Special toggle
wall plugs are
needed. Seek
expert advice
5. Screw one of the brackets onto the top of the wardrobe in the middle of the back, see below.
Position the wardrobe against the wall where you
want it to go, place the second bracket
onto the wall above the one fixed to the wardrobe and mark where the hole come on the wall. Move
the wardrobe away from the wall.
6. Attach the wall bracket using screws suitable for your type of wall, see Wall f ix ings above.
7. Place the wardrobe back against the wall so the two brackets match up and tie them together with
the plastic strap provided. The pl
ates need not match exactly, but the plastic tie must go through
each plate. Close the strap, but do not over tighten it. See diagrams below.
1
2
3
4
wall
wardrobe
HARTWELL 2 DOOR WARDROBE
446-368-018
Assembly instructions
Produced in China for Next Retail Ltd.
446-368-018
8 . If the wardrobe is not level on your floor, use the wedges provided. Snap them off so they do not
protrude out from the wardrobes legs. You can also snap them lengthways.
9 . Check that the doors are aligned correctly. If necessary adjust the door hinges as shown below
Loading...