Erco & Gener GenPro 22e, GenPro 2xe, GenPro 23e User Manual
L’esprit Modem
User Guide
GenPro 2xe
GenPro 22e
(GenPro 20e AOB)
Référence : EG_GenPro2xe_1003_UG_005_UK
Révision : 005
Date : 02/03/2012
S.A. ERCO & GENER – ZI de St. Lambert-des-Levées – BP 30163 – F-49412 SAUMUR Cedex
Tél. : +33 (0)2 41 83 13 00 – Fax : +33 (0)2 41 67 19 20 – www.ercogener.com – infos@ercogener.com
SA CAPITAL 200873 € – R.C. SAUMUR B 332 174 820 – SIRET 332 174 820 00032 – NAF 2630Z – TVA Intra : FR 16 332 174 820
GenPro 23e
(GenPro 24e AOB)
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 2 / 63
Document History
Rev. Modifications Author Date Validation Date
001 CREATION YST 11/08/2010
Add 4-wire cable with mini Blade fuse
§ 2.1 Contents and § 3.2.2.1 4-wire micro FIT
Updating
- of the limit of use of the digital input du §
8.2.3.1 Opto-coupled Inputs
- of the environmental conditions for the use
002
003
004
005
The main modifications of this document compared to the previous version are easily identifiable on the
screen by the blue color of the text.
with battery option. § 8.3 Environmental
characteristics
- of the information concerning the
certifications § 8.4 Standards/Conformities
- the non-guarantee of the battery § 9.3 Care
and maintenance
- the certificate of conformity.
Updating
- the limit of § 8.2.2.3 Buzzer
- the limit of § 8.2.3.2 Output – GenPro 24e
AOB
- the limit of use of the analogic input du §
8.2.3.3 Analog input – GenPro 24e AOB
With battery option prepare the modem for
storage or transport conditions
§ 5.9 Turning off the modem
§ 7.2.2 Internal battery option
§ 8.2.1 Power supply
The GenPro 20e AOB becomes GenPro
22e.
The GenPro 24e AOB becomes GenPro
23e.
The AOB term disappears.
YST 09/02/2011
YST 05/07/2011
YST 12/10/0211
YST 12/10/2012 TBO 04/06/2012
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 3 / 63
TABLE DES MATIERES
AVERTISSEMENT ............................................................................................................................................ 7
COPYRIGHT ..................................................................................................................................................... 8
1 RÉFÉRENCES ............................................................................................................................................... 9
1.1 VARIOUS REFERENCES .................................................................................................................................. 9
1.2 REFERRED DOCUMENTS ............................................................................................................................... 10
1.3 ABRÉVIATIONS ............................................................................................................................................. 10
1.4 SYMBOLS ..................................................................................................................................................... 12
2 PACKAGING ................................................................................................................................................ 12
2.1 CONTENT ..................................................................................................................................................... 12
2.2 PACKING CASE ............................................................................................................................................. 14
2.3 MODEM LABELS ............................................................................................................................................ 14
3 GENERAL PRESENTATION ....................................................................................................................... 15
3.1 DESCRIPTION ............................................................................................................................................... 15
3.2 EXTERNAL CONNECTIONS ............................................................................................................................. 16
3.2.1 Connections ................................................................................................................................... 16
3.2.1.1 Antenna connectors ................................................................................................................ 16
3.2.1.2 Micro FIT connectors .............................................................................................................. 16
3.2.1.3 15-pin Sub D HD connector .................................................................................................... 17
3.2.2 Cables ............................................................................................................................................ 18
3.2.2.1 2-wire micro FIT cable GenPro 22e ....................................................................................... 18
3.2.2.2 4-wire micro FIT cable GenPro 23e ...................................................................................... 18
3.2.2.3 2-wire micro FIT cable GenPro 23e ....................................................................................... 19
4 CHARACTERISTICS AND SERVICES ....................................................................................................... 20
5 USING THE MODEM ................................................................................................................................... 20
5.1 STARTING WITH THE MODEM ......................................................................................................................... 20
5.1.1 Mounting the modem ..................................................................................................................... 20
5.1.2 Installation of the modem ............................................................................................................... 21
5.1.3 Checking the communication with the modem .............................................................................. 22
5.1.3.1 Without Library ....................................................................................................................... 22
5.1.3.2 Standard with EGM Library .................................................................................................... 23
5.1.3.3 The application ERCO & GENER EasePro-01 ...................................................................... 23
5.1.3.4 The owner application ............................................................................................................ 23
5.1.4 SIM card Extraction ........................................................................................................................ 24
5.1.5 Hardware reset of the modem ....................................................................................................... 24
5.2 SPECIFIC RECOMMENDATIONS FOR THE USE OF THE MODEM IN VEHICLES ........................................................ 25
5.2.1 Recommended Connection on the battery of a truck .................................................................... 25
5.2.2 Technical constraints in truck......................................................................................................... 26
5.3 MODEM LEDS ............................................................................................................................................... 27
5.3.1 Without library ................................................................................................................................ 27
5.3.2 With EGM standard library ............................................................................................................. 27
5.3.3 The application ERCO & GENER EasePro-01 .............................................................................. 27
5.3.4 The owner application .................................................................................................................... 27
5.4 ECHO FUNCTION OF THE DEACTIVATED AT COMMANDS .................................................................................. 27
5.5 CHECKING THE QUALITY OF THE GSM RECEPTION SIGNAL .............................................................................. 28
5.6 VERIFICATION OF THE PIN CODE ................................................................................................................... 29
5.7 VERIFICATION OF THE MODEM REGISTRATION ON THE GSM NETWORK ............................................................ 29
5.8 MAIN AT COMMANDS (HAYES) .................................................................................................................... 30
5.9 TURNING OFF THE MODEM ............................................................................................................................ 31
5.10 MODEM UPDATING PROCEDURE .................................................................................................................. 31
6 TROUBLE SHOOTING ................................................................................................................................ 31
6.1 PROBLEM OF COMMUNICATION BETWEEN THE MODEM AND THE RS232 LINK (V24) .......................................... 31
6.2 "ERROR" MESSAGE .................................................................................................................................... 33
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 4 / 63
6.3 "NO CARRIER" MESSAGE ........................................................................................................................... 34
7 FUNCTIONAL DESCRIPTION ..................................................................................................................... 35
7.1 ARCHITECTURE ............................................................................................................................................ 35
7.2 POWER SUPPLY ........................................................................................................................................... 35
7.2.1 General presentation ..................................................................................................................... 35
7.2.2 Internal battery option .................................................................................................................... 36
7.2.2.1 Presentation of internal battery option .................................................................................... 36
7.2.2.2 Specifications of the internal battery option ............................................................................ 36
7.2.2.3 Charge voltage and supply voltage ........................................................................................ 37
7.2.2.4 Indication of presence/absence of the external power supply ............................................... 37
7.2.2.5 Instruction and restrictions of use ........................................................................................... 38
7.2.3 Protections of the power supply ..................................................................................................... 38
7.3 RS232 SERIAL LINK ...................................................................................................................................... 38
7.3.1 general presentation ...................................................................................................................... 38
7.3.2 Pins description .............................................................................................................................. 39
7.4 OUTPUT +3.8V ............................................................................................................................................ 40
7.5 INPUTS/OUTPUTS FUNCTIONING - GENPRO 23E ............................................................................................. 41
7.6 BOOT ......................................................................................................................................................... 42
7.7 RESET ....................................................................................................................................................... 42
7.7.1 General presentation ..................................................................................................................... 42
7.7.2 RESET sequence .......................................................................................................................... 43
7.8 WATCHDOG ................................................................................................................................................. 43
7.9 AUDIO ......................................................................................................................................................... 44
7.9.1 Microphone inputs .......................................................................................................................... 45
7.9.2 Loud-speaker outputs (Speaker) ................................................................................................... 45
7.9.3 Buzzer output ................................................................................................................................. 45
7.10 INTERNAL PROCESSOR ............................................................................................................................... 46
7.10.1 EGM presentation ........................................................................................................................ 46
7.10.2 EGM Architecture ......................................................................................................................... 47
8 TECHNICAL CHARACTERISTICS ............................................................................................................. 48
8.1 MECHANICAL CHARACTERISTICS ................................................................................................................... 48
8.2 ELECTRICAL CHARACTERISTICS ..................................................................................................................... 49
8.2.1 Power supply ................................................................................................................................. 49
8.2.2 Audio interface ............................................................................................................................... 51
8.2.2.1 Microphone ............................................................................................................................. 51
8.2.2.2 Loudspeaker ........................................................................................................................... 52
8.2.2.3 Buzzer ..................................................................................................................................... 53
8.2.3 Inputs/Output – GenPro 23e .......................................................................................................... 54
8.2.3.1 Opto-coupled Inputs – GenPro 23e ........................................................................................ 54
8.2.3.2 Output – GenPro 23e ............................................................................................................. 55
8.2.3.3 Analog input – GenPro 23e .................................................................................................... 55
8.2.3.4 Bus One Wire – GenPro 23e .................................................................................................. 56
8.2.4 Sim Interface .................................................................................................................................. 56
8.2.5 RESET signal ................................................................................................................................. 57
8.2.6 RF GSM/DCS characteristics ........................................................................................................ 57
8.2.6.1 RF functioning ........................................................................................................................ 57
8.2.6.2 GSM external antenna ............................................................................................................ 58
8.2.7 Characteristics of the accelerometer ............................................................................................. 58
8.3 ENVIRONMENTAL CHARACTERISTICS.............................................................................................................. 58
8.4 STANDARDS/CONFORMITIES ......................................................................................................................... 59
9 SECURITY RECOMMENDATIONS ............................................................................................................. 60
9.1 GENERAL SECURITY ..................................................................................................................................... 60
9.2 SECURITY IN A VEHICLE ................................................................................................................................ 61
9.3 CARE AND MAINTENANCE .............................................................................................................................. 61
9.4 YOUR RESPONSIBILITY .................................................................................................................................. 61
10 RECOMMENDED ACCESSORIES ........................................................................................................... 62
11 CLIENT SUPPORT .................................................................................................................................... 62
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 5 / 63
DECLARATION OF CONFORMITY ............................................................................................................... 63
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 6 / 63
PRÉSENTATION
Entirely dedicated to the wireless markets throughout the world, the GenPro 2xe (Application On Board)
allows a simple and rapid integration of GSM / GPRS Quad-Band (850/900/1800/1900 MHz) connectivity into
M2M applications.
The GenPro 2xe is a robust, reliable and long life product. Its very compact metal case makes it ideally
adapted to onboard standards
The range GenPro 2xe comes in two versions: GenPro 22e and GenPro 23e
Optional back-up battery and accelerometer associated with EGM (Erco & Gener Middleware) development
tools, offer the possibility for the personalisation of supplementary applications
Unlike GenPro 22e, GenPro 23e has 3 inputs and 1 digital output
The GenPro 2xe has 3 operating modes:
External mode (standard): The driving is made by an external application. The modem is used with
the AT commands set (see EG_EGM_CL_xxx_yy of ERCO & GENER).
Autonomous mode (optional): Once configured, the modem is autonomous; it cyclically registers the
positions and transmits them automatically to the client’s application via different services: SMS,
GSM Data, TCP socket GPRS (see EG_EasePro_01_CL_xxx_yy of ERCO & GENER).
Specific development mode: the EGM development tool allows to develop personalized embedded
application. For more information concerning the tools and the training, please contact our sales
department.
The GenPro 2xe provides digital inputs/outputs allowing the creation of embedded telematic solutions
with high added value.
This document describes the modem and provides the following information:
- General presentation,
- Functional description,
- Available basic services,
- Installation and use of the modem (first level),
- Trouble shooting,
- Recommended accessories for the use of the modem.
For more information concerning this document, ERCO & GENER puts at your disposal the following
elements :
- Commands List
External mode EG_EGM_CL_xxx_yy
Autonomous mode EG_EasePro_01_xxx_yy
- Application Note EG_GenPro2xe_1003_AN_xxx_yy
- Release Note EG_GenPro2xe_1003_RL_xxx_yy
- Support client (Hot-Line)
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 7 / 63
Avertissement
• Erco&Gener advises to read carefully all the documents concerning the GenPro 2xe (User Guide,
Application Notes, Command List).
• ERCO & GENER cannot be held responsible for:
- The problems due to an inappropriate use of the GenPro 2xe .
- The problems due to a wrong configuration
- The problems due to a wrong use of an embedded software application developed or
supplied by a third party.
- The dysfunctions due to the absence or a bad coverage of the GSM, GPRS networks.
- The dysfunctions if the product is used for the watching of physical persons where human
life is engaged.
• ERCO & GENER reserves the right to modify the functions of its products " GenPro 2xe " and
"EasePro" without previous notice.
- In order to avoid any risk of electrocution, do not open the casing.
- For any functioning, the casing must be closed.
- No internal part can be repaired by the user. The GenPro 2xe must be returned to the factory for any
repair.
- The GenPro 2xe must be placed in a normally ventilated area, out of sources of heat.
- In order to guarantee the electromagnetic compatibility, the length of the serial cable, the supply cable and
the inputs/outputs cable must not exceed 3 meters.
- The GenPro 2xe must not be connected directly to the mains supply; a voltage adapter must be used.
SCRAP THE WORN BATTERIES ACCORDING TO INSTRUCTIONS.
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 8 / 63
Copyright
The reproduction, transfer, distribution or storage of part or the totality of the contents of this document, in
any form, without the prior written authorization of ERCO & GENER is strictly prohibited.
GenPro 22e and GenPro 23e are a trademark of ERCO & GENER.
Hayes is a registered trademark of Hayes Microcomputer Product Inc. The names of products and
companies mentioned in this document may be names or trademarks of their respective holders.
The use of some products or services described in this document may require a paying subscription. The
availability of some products or services described in this document may change, depending on the
configurations and the materials.
In some countries, restrictions of use of the devices may be applied. For more information, thank you to
contact your nearest legally qualified local government representative.
ERCO & GENER follows a method of continuous development. Consequently, ERCO & GENER reserves
the right to change and improve any of its products described in this document, without notice.
The contents of this document are provided “as it is”. Except for the applicable obligatory laws, no guarantee
in any form, explicit or implicit, including but without being limited to it the implicit guarantees of aptitude to
marketing and of appropriateness to a particular use, is granted concerning the precision, the liability or the
contents of this document. ERCO & GENER reserves the right to revise or withdraw this document at any
time and without notice.
ERCO & GENER cannot be held responsible for any loss of data or income, as well as particular damage,
incidental, consecutive or indirect.
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 9 / 63
1 Références
1.1 Various References
The functionality according to the references GenPro 2xe are summarized in the table below
Modem GenPro 2xe 22e 23e
GSM Functions
- E-GSM Quad-Bandes 850/900/1800/1900 MHz
- ETSI GSM Phase 2+ Classe 4 (2W @ 850 / 900 MHz)
Classe 1 (1W @ 1800 / 1900 MHz)
- SIM Toolkit Release 99
Voice Functions
- Voice (GSM mode)
- Telephony, Emergency call 112
- Full Rate, Enhanced Full Rate, Half Rate and Adaptive Multi-Rate
(FR/EFR/HF/AMR)
- Echo cancelation and noise reduction
- Full Duplex Free-hand
DATA Functions
- GPRS Classe 10 (Jusqu'à 4Rx / 2Tx)
- Supporte le PBCCH, Schémas de codage : CS1 à CS4
- TCP/IP libraries (PPP, TCP Socket, UDP Socket*, FTP, SMTP*)
- Asynchronous data circuit, transparent and non-transparent 9600 (Standard) at
14400bds (depending on network)
- SMS Text, PDU, point to point MT/MO and SMS Cell Broadcast
Memory Type
- Flash memory 512 Kbytes, SDRAM 16 Mbits, Serial Flash 16 Mbits.
Interfaces
- GSM Antenna: SMA-F connector
- Power supply : +5.5 to +32 VDC ( micro-FIT connector )
- RS232 (300 to 115200bds) + Audio through the female 15-pin Sub-D
- Commandes AT : GSM 07.05 et 07.07
- 3 opto-inputs from 3Vdc to32Vdc (Micro-FIT connector)
- 1 open-collector Output 60Vdc – 1A ( Micro-FIT connector)
- SIM reader (SIM 3V – 1,8V)
- Watchdog
Accessories supplied
- Fixing brackets (x2)
- 2-wire Micro FIT Power supply cables (2 Inputs)
- 4-wire Micro FIT cables (Power supply, Input and Output)
- 2-wire Micro FIT cables (2 Inputs)
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X
X
X X
X X
X X
X
X
X
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 10 / 63
1.2 Referred documents
Commands List of
Standard library of ERCO & GENER : EG_EGM_CL_xxx_yy
the embedded application EasePro of ERCO & GENER : EG_EasePro_01_CL_xxx_yy
Application Notes GenPro 2xe of ERCO & GENER : EG_GenPro2xe_1003_AN_xxx_yy
GSM reference documents:
GSM 07.05.
GSM 07.07.
1.3 Abréviations
Abbreviations Definition
AC
ACM
AMR
AT
BTS
CLK
CMOS
CS
CTS
dB
dBc
dBi
dBm
DC
DCD
DCE
DCS
DSR
DTE
DTMF
DTR
EEPROM
EFR
EGM
E-GSM
EMC
EMI
ESD
ETSI
FIT
FR
FTA
FTP
GCF
GND
GPIO
Alternative Current
Accumulated Call Meter
Adaptive Multi-Rate
Attention (prefix for modem commands)
Base Transceiver Station
ClocK
Complementary Metal Oxide Semiconductor
Coding Scheme
Clear To Send
Decibel
Decibel relative to the Carrier power
Decibel relative to an Isotropic radiator
Decibel relative to one milliwatt
Direct Current
Data Carrier Detect
Data Communication Equipment
Digital Cellular System
Data Set Ready
Data Terminal Equipment
Dual Tone Multi-Frequency
Data Terminal Ready
Electrically Erasable Programmable Read-Only Memory
Enhanced Full Rate
Erco Gener Middleware
Extended GSM
ElectroMagnetic Compatibility
ElectroMagnetic Interference
ElectroStatic Discharges
European Telecommunications Standards Institute
Series of connectors (micro-FIT)
Full Rate
Full Type Approval
File Transfert Protocol
Global Certification Forum
GrouND
General Purpose Input Output
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
GPRS
GPS
GSM
HR
I
IEC
IMEI
I/O
LED
LLC
MAX
ME
MIC
Micro FIT
MIN
MNP
MO
MS
MT
NOM
O
Pa
PBCCH
PC
PCL
PDP
PIN
PLMN
PUK
RF
RFI
RI
RMS
RTS
RX
SIM
SMA
SMB
SMS
SNR
SNTP
SPI
SPL
SPK
SRAM
TCP/IP
TDMA
TU
TUHigh
TX
TYP
UTC
VSWR
General Packet Radio Service
Global Positioning System
Global System for Mobile communications
Half Rate
Input
International Electrotechnical Commission
International Mobile Equipment Identification
Input / Output
Light Emitting Diode
Low Level Command
MAXimum
Mobile Equipment
MICrophone
Family of connectors from Molex
MINimum
Microcom Networking Protocol
Mobile Originated
Mobile Station
Mobile Terminated
NOMinal
Output
Pascal (for speaker sound pressure measurements)
Packet Broadcast Control Channel
Personal Computer
Power Control Level
Packet Data Protocol
Personal Identity Number
Public Land Mobile Network
Personal Unblocking Key
Radio Frequency
Radio Frequency Interference
Ring Indicator
Root Mean Square
Request To Send
Receive
Subscriber Identification Module
SubMiniature version A RF connector
SubMiniature version B RF connector
Short Message Service
Signal-to-Noise Ratio
Simple Network Time Protocol
Serial Peripheral Interface
Sound Pressure Level
SpeaKer
Static RAM
Transmission Control Protocol / Internet Protocol
Time Division Multiple Access
Typical Urban fading profile
Typical Urban, High speed fading profile
Transmit
TYPical
Universal Time Clock
Voltage Stationary Wave Ratio
EG_GenPro2xe_1003_UG_005_UK Page 11 / 63
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 12 / 63
1.4 Symbols
The following symbols are used to highlight the important information of this userguide.
A symbol for the essential information concerning the module integration and performance.
A warning symbol indicates the actions that could harm or damage the module.
2 Packaging
2.1 Content
The GenPro 2xe (see table 1.1) is supplied with:
- a GenPro 2xe cardboard packaging
- a modem GenPro 2xe ,
- 2 fixing brackets,
- A technical sheet (Instructions Sheet)
Table 1.1
GenPro 2xe cable is supplied with
2-wire stripped cable (Red/Black) with fuse
4-wire stripped cable
Red/Black/Orange/Green stripped with 5x20 fuse of 2.5A/250V
or depending on the supplying
Red/Black/Yellow/Brown stripped with mini Blade fuse of 2A/32V.
2-wire stripped cable (Blue/Yellow).
22e 23e
X
X
X
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 13 / 63
Depending on the reference GenPro ordered, 2 or 4 wires cables are supplied.
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 14 / 63
2.2 Packing case
The external dimensions of the packing case are:
- Width: 54.5 mm,
- Height : 68 mm,
- Length: 108 mm.
An identification label is put on the top of the packing case. It shows:
- The ERCO & GENER logo,
- The product reference: GenPro 2xe,
- The CE mark,
- The ROHS Compliant 2002 / 95 / EC mark,
- The IMEI bar code with 15 digits.
The dimensions of the label are:
- Height: 37 mm,
- Length: 70 mm.
2.3 Modem labels
On the standard casing, there are 2 labels placed on the back part of the modem:
A production label indicating the following information:
- The CE mark,
- The crossed wheelie-bin mark (DEEE standards),
- The direct current mark (VDC),
-
The mark AOB (R30),
- The IMEI bar code with 15 digits.
A label of the markings: ROHS (2002/95/CE).
If the internal battery option has been mounted during production, the modem has the
following label: “Lithium-Polymer Battery Inside”.
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 15 / 63
3 General Presentation
3.1 Description
Description of the modem GenPro 2xe :
Rear side
Micro-Fit 4pts/M
connector
Sub HD 15pts/F
Connector
Front side
Micro-Fit 2pts/M
Connectorr
(only )
GenPro 23e
2 brackets to fix the modem on a support.
SMA/F
Connecteur
GSM LED SIM card cover
Fixing brackets
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 16 / 63
3.2 External connections
3.2.1 Connections
3.2.1.1 Antenna connectors
The GSM antenna connector is SMA female with a 50 impedance
3.2.1.2 Micro FIT connectors Female Micro FIT Connector with 4 male pins:
This connector GenPro 2xe is a connector for external power DC and GPIO (these 2 Input and output
signals are available only for the GenPro 24e version).
Pin N° GenPro 22e GenPro 23e
1 +VDC +VDC
The pins 3 and 4 are used for the Input/Output functions. The modem can only be powered
by the pins 1 (+VDC) and 2 (GND)..
Female Micro FIT connector with 2 male pins:
Only GenPro 23e, this connector is used for the GPIO (2 Input signals).
2 GND GND
3 --- INPUT 1(E1)
4 --- OUTPUT (S1)
Pin N°
Signal
Signal
1 INPUT 3 (E3)
2 INPUT 2 (E2) *
* as an option, E2 can be an analog input (contact us)
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 17 / 63
3.2.1.3 15-pin Sub D HD connector
The female 15-pin high density Sub D connector is used for:
- The RS232 serial link connection,
- The audio line connection (microphone and loud-speaker),
- The BOOT and RESET signals.
Pin N°
1
Signal detection / Buzzer *
Description
2 Data emission 103 – ED – TXD I
3 Boot BOOT I
4 Microphone + MICP I
5 Microphone - MICN I
6 Data reception 104 – RD – RXD O
7 Data Set Ready 107 – PDP – DSR O
8 Data Terminal Ready 108/2 – TDP – DTR I
9 Signalization ground 102 – TS – GND 10 Loudspeaker + SPKP O
11 Clear to send 106 – PAE – CTS O
12 Request To Send 105 – DPE – RTS I
13 Ring indicator / 3,8V * 125 – IA – RI O
14 Reset RESET I
15 Loud Speaker - SPKN O
Circuit (V24 – RS232C) I/O
109 – DS – DCD O
(*)by default:
- The pin 1 is the Buzzer output (wiring of the output 109/DCD optional).
- The pin 13 is a fixed tension (to power accessories like GenBlue 15e) of 3,8V
100mA (wiring of the output 125/RI optional).
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
3.2.2 Cables
According GenPro ordered, different cables described below will be delivered (refer to table 1.1).
3.2.2.1 2-wire micro FIT cable GenPro 22e
The 2-wire micro FIT cable allows to power the modem.
Molex connector
View from cable side
EG_GenPro2xe_1003_UG_005_UK Page 18 / 63
Black wire (GND)
Red wire (+VDC)
Fuse 2.5A/250V
(5 x 20 mm)
Component Characteristics
4-pin Micro FIT connector Supplier: MOLEX
Cable Length 1.5m
Wirel Tinned copper 24 x 0.2 mm
Section : 0.75 mm²
Fuse F2.5A L250V
5mm tinned copper wire
3.2.2.2 4-wire micro FIT cable GenPro 23e
One of the two following cables is provided
The 4-wire micro FIT cable allows to power the modem and to use the 2 signals Input and Output.
Molex connector
Green wire (OUTPUT)
Orange wire (INPUT 1)
View from cable side
OUTPUT 1
OUTPUT 2
Black wire (GND)
Red wire (+VDC)
Component Characteristics
4-pin Micro FIT connector Supplier: MOLEX
Cable Length 1.5m
Wire Tinned copper 24 x 0.2 mm
Fuse F2.5A L250V
Fuse 2.5A/250V
(5 x 20 mm)
5mm tinned copper wire
Section : 0.75 mm²
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
EG_GenPro2xe_1003_UG_005_UK Page 19 / 63
Component Characteristics
4-pin Micro FIT connector
Cable Length 1.5m
Wire Tinned copper 24 x 0.2 mm
Surface area : 0.75 mm²
Fuse mini N 2A 32V Fast (Grey)
3.2.2.3 2-wire micro FIT cable GenPro 23e
The 2-wire micro FIT cable allows to use the 2 supplementary inputs.
Molex connector
Blue wire (INPUT 3)
5mm tinned copper wire
View from cable side
INPUT 3
INPUT 2
Descriptions and non-contractual illustrations in this document are given as an indication only.
Yellow wire (INPUT 2)
Component
2-pin Micro FIT connector Supplier: MOLEX
Cable Length 1.5m
Wire Section : 0.5 mm²
ERCO&GENER reserves the right to make any modifications.
Characteristics
Dct_427_00
Loading...