Erbauer ERB062VAC, ERB063VAC User Manual

WET/DRY VACUUM

WARRANTY

YEARS

ERB062VAC

ERB063VAC

TVC125S1 TVC140S1-M-070924.indd 1 2007-9-25 9:44:17

TVC125S1 TVC140S1-M-070924.indd 2 2007-9-25 9:44:17

WET/DRY VACUUM

GUARANTEE

This

product carries a guarantee of 24 months. If your product develops a
fault within this period, you should in the first instance contact the retailer where the
item was purchased.

This guarantee specifically excludes losses caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental damage

- Cosmetic damage

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.

For further technical advice, spare parts or repair service (outside of guarantee) please
contact the customer helpline number on 0845 607 6380.

Congratulations on your purchase of a quality power tool from Erbauer (UK)
Ltd. This product should give you reliable service but for your peace of mind
this

power tool does carries a 24-month guarantee, the terms of

which are detailed below.

If this product develops a fault within the guarantee period contact your
retailer.

Please retain this handbook in case you need to refer to safety, care or guarantee
information in the future.

TVC125S1 TVC140S1-M-070924.indd 3 2007-9-25 9:44:18

SAFETY INSTRUCTIONS

Read all instructions. Failure to follow all instructions listed below
may result in serious injury. This product should never be left

unattended when connected to the mains supply.

SAVE THESE INSTRUCTIONS

• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.

ELECTRICAL SAFETY

Before switching the product on, make sure that the voltage of your electricity supply
is the same as that indicated on the rating plate. This product is designed to operate on
230V AC 50Hz. Connecting it to any other power source may cause damage.

IMPORTANT NOTES

• Attention: Before assembly and starting operation, read the operating instructions

carefully.

• Check that the mains voltage corresponds to the details on the type plate.

• Only connect to a proper 230 volt, 50 Hz earthed socket.

• Pull the mains plug out of the socket when: the unit is not in use, before opening the

unit, before cleaning and maintenance.

• Never clean with solvents.

• Do not use the cable to pull the plug out of the socket. When unit is ready for use, do

not leave unattended.

• Safeguard from children.

• Care must be taken that the mains connection lead is not damaged by being driven

over, crushed,stretched, etc.

• The unit must not be operated if the mains connection lead is not in perfect

condition.

• Replacement mains connection leads must not differ from the versions indicated by

the manufacturer.

• On no account vacuum: burning matches, glowing ashes and cigarette ends,

inflammable, corrosive, fire hazard or explosive substances, vapours and liquids.

• This unit is not suitable for vacuuming dust which is damaging to health.

• Store the unit in a dry place.

• Do not operate a defective unit.

• Servicing only by an authorised service point.

• Use only for operations for which the unit is intended.

• Take great care when cleaning stairs.

• Use only manufacturer’s attachments and spare parts.

TVC125S1 TVC140S1-M-070924.indd 4 2007-9-25 9:44:18

WET/DRY VACUUM

SYMBOLS

Read the manual Warning Wear gloves

Wear dust mask,eye & ear protection

Conforms to relevant safety standards

TVC125S1 TVC140S1-M-070924.indd 5 2007-9-25 9:44:18

1. SOCKET FOR POWER TOOLS

2. FILTER BASKET(SEE FIG 8)

3. LATCH

4. CONTAINER

5. WHEEL

6. HOSE CONNECTION PIECE

7. VACUUM HOSE

8. BLOWER HEAD

9. ON/OFF SWITCH/OPERATING MODE SWITCH

10. BUTTON

11. COMBI NOZZLE

12. DUST BAG (SEE FIG 9)

13. FOAM FILTER (SEE FIG 8)

14. CREVICE NOZZLE

15. EXTENSION TUBE

1

3

4

5

9

8

6

7

15

10

11

14

TVC125S1 TVC140S1-M-070924.indd 6 2007-9-25 9:44:19

WET/DRY VACUUM

TECHNICAL DATA

ACCESSORIES

Vacuum hose 1pc
Extension tube 1pc
Combi nozzle 1pc
Crevice nozzle 1pc
Wheels 4pcs
Foam filter 1pc
Dust bag 1pc

Model NO. ERB062VAC ERB063VAC

Rated voltage 230V~50Hz 230V~50Hz

Rated input power 1250W 1400W

With power take-off socket 1500W 1500W

Capacity 20L 30L

Protection against ingress of water IPX4 IPX4

Machine weight 6.5kg 7.1kg

TVC125S1 TVC140S1-M-070924.indd 7 2007-9-25 9:44:19

Note: Before using the tool, read the
instruction book carefully.

MOUNTING

1. Assemble the wheels (See Fig 1, 2)

Push each wheel into the base of the container
ensuring correct orientation. The wheels are
friction fit.

2. Assemble the hose
Caution: This hose contains electrical

connections:

- do not use to suck up water (for vacuum
cleaners only);

- do not immerse in water for cleaning;

- the hose should be checked regularly and must
not be used if damaged.

Push the flexible hose into the hose connection
piece firmly. (See Fig 3)
Connect one end of the extension tube to the
flexible hose firmly. (See Fig 4)

Fig 2

Fig 1

Fig 3

Fig 4

TVC125S1 TVC140S1-M-070924.indd 8 2007-9-25 9:44:21

WET/DRY VACUUM

Push the combi nozzle (11) to the other end of the
extension tube. (See Fig 5)
Pressing the button (10) and pulling the end of the
extension tube can change the length of it.

3. The function of the nozzle

Fig 6

Fig 5

15

11

10

TVC125S1 TVC140S1-M-070924.indd 9 2007-9-25 9:44:22

OPERATION

Observe correct mains voltage: The voltage of
the power source must agree with the voltage
specified on the nameplate of the machine.
Equipment marked with 230 V can also be
connected to 220V.

Operation with remote automatic switching
(Fig 7)

A socket outlet with earthing contact is integrated
in the vacuum cleaner. It is possible to connect
an external power tool here. (Max. input power
2000W) The vacuum cleaner is automatically
started via the connected power tool. Please
observe the maximum allowable connection
load of the connected power tool (Fig 7) Set the
operating mode switch to

I. For connecting the
power tools, various hose systems are available
as accessories.

Switching on: Switch on the power tool. The
vacuum cleaner switches on automatically after
approx. 10 seconds.
Switching off: Switch off the power tool. The
vacuum cleaner switches off automatically after
approx.20 seconds.

WET VACUUMING

Danger of explosion and fire! Do not
vacuum inflammable or explosive fluids;
for example, petrol, oil, alcohol, solvents.
Do not vacuum hot or burning dust. Do not
operate the machine in rooms where the
danger of an explosion exists.
The machine is intended for vacuuming air
and water mixtures. The machine is not to
be used as a water pump.

1. The dust bag (12) must be removed before wet
vacuuming.

2. Pull the supplied foamed plastic filter over the
filter basket for wet vacuum-cleaning. Attach the
blower head. (Fig 8)

3. Switching On and Off

To start the machine, set the On/Off switch to II

.

To switch off the machine, set the On/Off switch

Fig 7

Fig 8

Fig 9

13

12

2

TVC125S1 TVC140S1-M-070924.indd 10 2007-9-25 9:44:26

WET/DRY VACUUM

to 0.
Note: When the maximum filling height is

reached, switch off the machine immediately.
Before opening and emptying, always pull the
plug from the socket outlet.

DRY VACUUMING

1. Slip the dust bag onto the socket for dry
vacuum-cleaning. The dust bag is suitable only
for dry vacuum-cleaning.

2. To insert the dust bag, slide the cardboard
frame fully onto the connection piece inside of
the container. Attach the blower head. (Fig 9)

3. Switching On and Off

To start the machine, set the On/Off switch to II

.
To switch off the machine, set the On/Off switch
to

0.

MAINTENANCE AND CLEANING

Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
Always keep the machine clean.
To maintain the optimum performance of
the machine, we recommended cleaning the
permanent filter after each use. For this purpose,
clean the permanent filter with a brush or rinse
with water.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. For further

information visit www.recycle-more.co.uk.

TVC125S1 TVC140S1-M-070924.indd 11 2007-9-25 9:44:26

PLUG REPLACEMENT

If you need to replace the fitted plug then follow
the instructions below.

Important

The wires in the mains lead are coloured in
accordance with the following code:

Green & yellow - Earth
Blue - Neutral
Brown - Live

As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows. The wire which is
coloured green & yellow must be connected to
the terminal which is marked with E or .
The wire which is coloured blue must be
connected to the terminal which is marked with
N. The wire, which is coloured brown, must be
connected to the terminal, which is marked with
the letter L.
Warning: Never connect live or netutral wires
to the earth terminal of the plug. Only fit an
approved 13 Amp BS1363/A plug and the correct
rated fuse.

Note: If a moulded plug is fitted and has to be
removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
If the supply cord is damaged it must be replaced
by a service agent or a similarly qualified person
in order to avoid hazard.

TVC125S1 TVC140S1-M-070924.indd 12 2007-9-25 9:44:28

WET/DRY VACUUM

Declaration of Conformity

We, Importer

Erbauer (UK) LTD BA22 8RT

Declare that the product

WET/DRY VACUUM

ERB062VAC/ERB063VAC

Complies with the following Directives,
EC Low Voltage Directive 2006/95/EC

EC Electromagnetic Compatibility Directive 2004/108/EC

2002/95/EC Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment

Standards and technical specifications referred to:

EN 60335-1:2002+A11:2004+A1:2004+A12:2006+A2:2006

EN 60335-2-2:2003+A1:2004+A2:2006

EN 50366:2003+A1:2006

EN 55014-1:2000+A1:2001+A2:2002

EN 55014-2:1997+A1:2001

EN 61000-3-2:2000+A2:2005

EN 61000-3-3:1995+A1:2001 +A2:2005

2007

Authorised Signatory

Date: 01/01/07

Signature:

Name: Peter Harries
Erbauer (UK) Ltd
Quality Manager

TVC125S1 TVC140S1-M-070924.indd 13 2007-9-25 9:44:28

TVC125S1 TVC140S1-M-070924.indd 14 2007-9-25 9:44:28

TVC125S1 TVC140S1-M-070924.indd 15 2007-9-25 9:44:28

TVC125S1 TVC140S1-M-070924.indd 16 2007-9-25 9:44:28