Equity by La Crosse 65903 User Manual

SOLAR HYBRID ALARM CLOCK

Model: 65903

FUNCTION:

1. Solar power and battery operated
day, date and alarm time or temperature (selectable)

2. 5 minutes repeating snooze

3. Green LED back-light

4. 12 hour or 24 hour format

BATTERY AND SOLAR POWER COSUMPTION AND UTILIZATION
This clock is designed to operate using two 1.5V alkaline batteries and solar power. It automatically switches between solar and
battery power depending in the lighting conditions and will extend normal battery life to 4-5 years if the clock is used in light at least
2000 lux for 10 hours per day,

INSTALL THE BATTERIES

1. Remove the battery compartment cover on the base of the clock.

2. Insert 2 PCS “AA” (1.5V) ALKALINE batteries noting the polarity as indicated inside the batteries compartment.

3. Replace the battery compartment cover.

SETTING THE CALENDAR

1. Press the RESET button (Located on the base of the clock) - to do this. Use a pin to push through the hole, The clock will now,
beep and display at 12:00 AM.

2. Slide the LOCK/ALARM/DATE/TIME switch (A) to the DATE SET position and the year/day/date digits will begin to flash .

3. Press the 12-24HR/YEAR button (C) to set the year.

4. Press the MINUTE/DATE button (D) to set the date.

5. Press the HOUR/MONTH button (E) to set the month.

6. After the CALENDAR has been set, slide the LOCK/ALARM/DATE/TIME switch to the LOCK position.

SETTING THE TIME

1. Slide the LOCK/ALARM/DATE/TIME switch (A) to the TIME SET position and the hour/minutes digits will begin to flash .

2. Press HOUR/MINUTE to set the hour. Please make sure AM/PM is correctly, the AM/PM will appear on the display for AM/PM
time (in 12 hours format)

3. Press the MINUTE/DATE button to set the minute

4. After setting the correct time. Slide the LOCK/ALARM/DATE/TTME to the LOCK position.

SETTING THE ALARM

1. Slide the LOCK/ALARM/DATE/TIME to the AL. SET ALARM position.

2. Press HOUR/MONTH button to set the hour. Please make sure AM/PM is set correctly, the AM/PM indicator will appear on the
display for AM or PM time. (in 12 hour format)

3. Press the MINUTE/DATE button to set the minute.

5. After the alarm has been set, move the slide switch LOCK/ALARM/DATE/TIME to the LOCK position.

ACTIVATING THE ALARM AND SNOOZE

After setting the alarm to the desired alarm time, you may activate the alarm by moving the ALARM ON/OFF switch to the ON
position. A “bell” Icon will appear to indicate the alarm has been activated. The alarm will activate at the present time and sound for
60 seconds. The alarm sound can be stopped and repeated again (5) minutes late when the SNOOZE/LIGHT is depressed at the time
alarm sounds. The snooze function can be repeated again and again. You may also shut off the alarm completely, by sliding ALARM
ON/OFF switch to the OFF position.

DISPLAY MODE
Press the TEMPIALARM button to select between

- Alarm time display, the word ALARM appears on the display

-Temperature display, the word TEMP appear in the display

GREEN BACK-LIGHT
The display can be illuminated at any time by pressing the Top of the clock SNOOZE/LIGHT.

12 HOUR / 24 HOUR FORMATS
Press 12/24 HR button to change your desired hour display format. in 12 hour format, an AM or PM indicator will appear on the
display.

TEMPERATURE
Press ⁰C/⁰F button to adjust ⁰C or ⁰F

Two Year Warranty (U.S.A.)

Equity products are warranted for two years from the date of consumer purchase against defects in material and workmanship.
During this period such defects will be repaired, or the product will be replaced at Equity’s option. This warranty does not cover
damage caused by misuse or negligence. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR
FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM DATE OF PURCHASE. Some
states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you. This warranty
gives you specific legal rights and you may also have other rights which vary from State to State.

If your product is not working properly, please send:

- The Product

- a letter explaining the problem

- and $5.00 for postage and handling to:

Equity Warranty Dept.
2817 Losey Blvd. S
La Crosse, WI 54601

For Customer Support, visit:

www.equitybylacrosse.com/support