Equity by La Crosse 40001 User Manual

MODEL 40001

OPERATING MANUAL

To operate the clock: To power on the clock, hold the POWER/DST SET button for 2 seconds, the correct

time, month, and date (e.g. “12 31” means Dec 31) will be displayed. The clock will automatically
indicate the AM/PM time.

Select the time zone: Slide the TIME ZONE switch (inside battery compartment) to display the time in
the desired time zone. The default time zone is Eastern Standard Time (EST).

Select Daylight-saving Time (DST): The clock is set at the DST Auto (don) position as the default. This
setting is correct unless you are in Arizona or parts of Indiana. Press the DST SET button once will show
the current setting. To change the DST status, press the DST SET button again, this will toggle between
“don” (DST is ON) or “doF” (DST is OFF). In a few seconds the time will be displayed.

Don DST scheme 2007 adjustment automatically
DST Starts: Second Sunday in March
DST Ends: First Sunday in November
Dof Automatic DST function Disabled

Display the Year: To display the year, press “ ” button

Setting the Alarm: To set the alarm, press the ALARM SET button once, press either “ ” or “ ” button

to the correct hour (Be sure that the AM/PM is correct). Press the Alarm button once again and press
either “ ” or “ ” button to the desired minute. In a few seconds the time will be displayed.

Operating the Alarm and Snooze: Press the ALARM ON/OFF button to display the bell icon. The alarm
will sound at the alarm set. When the alarm sounds, press the snooze to get an extra 9 minutes of sleep
(flashing “Zz”). The Snooze may be repeated many times. Press the “Alarm Set” button to stop the alarm
sound and repeat at next day. To shut the alarm off, press the ALARM ON/OFF button to disable the
alarm.

Displaying the Alarm Time: To show the alarm setting time, press “SNOOZE” button once. In a few
seconds the time will be displayed.

Displaying the Temperature by °C/°F: Change the temperature readout to C or F by pressing the “ ”
forward button. The reading range of temperature is -10°C to 60°C (14 °F to 140 °F), the resolution is 0.1
°C/°F and the accuracy is +/- 0.0 °C (+/- 2 °F).

Auto-Time Incorrect: If for some reason the Auto-Set time is incorrect or lost, press and hold the
ALARM SET button for -5 seconds, and the year will begin to blink, then press the “ ” or “ ” button to

set the year. Press the ALARM SET button again to set the date, again to set the hour (be sure the
AM/PM is correct), again to set the minute, and one more to secure all in the memory.

No time Displayed when the power is turned on: If the display is blank or abnormal when the power is
turned on, remove the 2xAAA batteries or press reset. In a few seconds, the display will be ON and show
12:00. Now repeat the procedure to reset the real time memory above and the time will be
automatically stored in the clock.

2xAAA Batteries replacement: The real time stays in memory if the clock is without batteries for less
than 30 seconds. However, if you do lose the Auto-Set Time during battery replacement, please repeat
the procedure to reset the real time memory above.

Two Year Warranty (U.S.A.)

Equity products are warranted for two years from the date of consumer purchase against defects in material and
workmanship. During this period such defects will be repaired, or the product will be replaced at Equity’s
option. This warranty does not cover damage caused by misuse or negligence. ALL IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO A PERIOD ENDING TWO YEARS FROM DATE OF PURCHASE. Some states do not allow limitations on
how long an implied warranty lasts so the above limitation may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from State to State.

Please help in preservation of the environment and return used batteries to an authorized depot. Remove the battery
from the clock if you do not intend to use for an extended period of time

.