Equity by La Crosse 30220 User Manual

EJMA2319L212#

Printed in China

Mode/Set Button

Up/Alarm Button

Down/°F °C Button

30220

Features

Configuration

To set the time:

- Press and hold the MODE/SET button for 3 seconds. Set the
HOUR by pressing the UP/ALARM or DOWN/°F °C buttons.

- Press the MODE/SET button again. Set the MINUTES by
pressing the UP/ALARM or DOWN/°F °C buttons.

To set the Date:

- Press the MODE/SET button to view the date and month.

- Press and hold the MODE/SET button for 3 seconds until the

YEAR appears and is blinking.

- Set the YEAR by pressing the UP/ALARM or DOWN/°F °C
buttons.

- Press the MODE/SET button again, and the MONTH will start
blinking.

- Set the MONTH by pressing the UP/ALARM or DOWN/°F °C
buttons.

- Press the MODE/SET button again and the DAY will start blinking.

- Set the DAY by pressing the UP/ALARM or DOWN/°F °C.

Note: The day of the week is automatically set.

To set the Alarm:

- Press the MODE/SET button until the alarm time is displayed in
the bottom segment of the LCD (indicated by the alarm bell icon
in the upper left corner of the time section).

Desktop Station

Quick Setup Guide

 Forecast Indicator
 Temperature and Humidity with Min / Max
 Comfort Indicator
 Temperature History
 Time and Date
 Day of Week
 Alarm with Snooze

 Backlit LCD Display

- Press and hold the MODE/SET button for 3 seconds until the
ALARM HOUR is blinking. Set the ALARM HOUR by pressing the
UP/ALARM or DOWN/°F °C buttons.

- Press the MODE/SET button again. Set the ALARM MINUTES by
pressing the UP/ALARM or DOWN/°F °C buttons.

Operation

IMPORTANT: Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad)
batteries.

Function Buttons
MODE/SET BUTTON:

MAX/MIN BUTTON:

Note: If the MAX/MIN button is not pressed for approximately 8
seconds after pressing it once, it will return to the current temperature
and humidity. To display the MINIMUM temp and humidity, it is
necessary to press the MAX/MIN button twice within roughly 5 seconds.

SNZ (snooze) BUTTON:

LIGHT BUTTON:

Press the MODE/SET button one
time to view the date and month.
Press the MODE/SET button twice to
view the current alarm time.

Pressing the MODE/SET button
again will return to the default view of
the current time.

Press the MAX/MIN button once to
view the MAXIMUM temperature and
humidity.

Press the MAX/MIN button again to
view the MINUMUM temperature and
humidity.

Press the SNZ button once during
normal operation to turn the LCD
backlight on. Press the SNZ button
while the alarm is sounding to activate
the snooze mode. The LCD backlight
will come on and the alarm will be
silenced for roughly 8 min, after which
the alarm will sound again.

Press the LIGHT button to activate
the LCD backlight.

The light stays on for approximately
8 seconds.

Other Functions

To view the date:

While viewing the time, press the MODE/SET button and the date and
month will be displayed.

To view the alarm time:

While viewing the TIME, press the MODE/SET button (the date and
month will be displayed), then press the MODE/SET button again. The
currently set alarm time is displayed.

Turning the Alarm ON/OFF:

To turn the alarm on or off, just press the UP button once. When the
alarm is ON, a little alarm bell icon is displayed in the upper left corner
of the time section. If the little alarm icon is not showing, the alarm is
turned OFF.

12/24 Hour Format:

With the time displayed normally, press the UP/ALARM button and
hold it pressed for 3 seconds. This will switch the time format from 12
to 24 hour format and back.

Note: The default mode is 12 hour time.

Fahrenheit / Celsius:

To change the temperature display between Celsius and Fahrenheit,
press the DOWN/°F °C button.

Warranty

This La Crosse Technology product is warranted for two years from the
date of consumer purchase against defects in material and
workmanship. During this period such defects will be repaired, or the

product will be replaced at La Crosse Technology’s option, without

charge. This warranty does not cover damage caused by misuse or
negligence. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IMPLIED WARRANTIES OR FITNESS AND
MERCHANTABILITY, ARE LIMITED IN DURATION TO THE PERIOD
ENDING ONE YEAR FROM THE DATE OF PURCHASE. Some
states do not allow limitations on how long an implied warranty last so
the above limitation may not apply to you. This warranty gives you
specific legal rights and you may have other rights, which vary from
state to state.

If your clock isn’t working, send it with a letter explaining the problem

and $5.00 for postage and handling to:

All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or
duplicated or processed using electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is
regularly checked and corrections made in the next issue. We accept no liability for technical
mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.

La Crosse Technology Warranty Dept.

2817 Losey Blvd. S

La Crosse, WI 54601

For customer support on the web:

www.lacrossetechnology.com/30220