Equipex RE-2 Parts List

OPERATION MANUAL FOR

SODIR

WARMING CABINETS

MODEL RE-2

765 Westminster Street • Providence, Rhode Island 02903 • U.S.A.

Tel: [phone] Fax: [phone] e -maiI: [e-mail]

Operator's Manual

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all the instructions.

2. Do not touch hot surfaces. Use handles and knobs.

3. To avoid electrical shock, do not immerse the power cord, plug, or connection box in water or other liquid.

4. Close supervision is necessary when any appliance is used or near children.

5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before
cleaning the appliance.

6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged
in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.

7. The use of accessory attachments not recommended by the appliance manufacturer may cause injury.

8 Do not use outdoors.

9. Do not allow cord to hang over edge of table or counter, or to touch hot surfaces.

10. Do not place on or near a hot gas or electric burner, or in a heated oven.

11. Extreme caution must be used when moving an appliance containing hot oil.

12. To disconnect, turn any control to "OFF" then remove plug from the wall outlet.

13. Do not use appliance for other than its intended use.

14. SAVE THESE INSTRUCTIONS

Page 2

INTRODUCTION

The SODIR Model RE -2 is a dual service warning cabinet designed to offer quality
reheating and holding of cooked products. The units are constructed of food quality stainless
steel and tinted tempered (safety) glass and feature a top mounted sheathed heating element
and blower fan assembly. The warming cabinet is thermostatically controlled up to 200 F and is
equipped with a 120-minute timer. The unit is furnished with an ON/OFF switch, a rotary switch
and a red indicator light. The warmer comes with a set often wire racks and two removable drip
trays. The unit is also equipped with a fluorescent lamp that is mounted to the top of the warming
chamber.

SPECIFICATIONS

Model Electrical Plug Configuration

RE-2 208/240V, 1PH, 2.5KW, 10/12A NEMA-6-15P

INSTALLATION

The SODIR warming cabinet needs to be connected to a grounded outlet of proper voltage
(208/240V, 1PH). DO NOT place the unit in a damp area or near steam sources. The unit is
shipped completely assembled from the factory, however, cleaning is recommended before use.

WARNING: Disconnect (unplug) electrical power supply before cleaning

OPERATION

The easy to use control panel consists of a lighted ON/OFF switch, a red indicator light, a 4­position ON/OFF rotary switch (controls the heating element and blower fan assembly), a 120­minute timer, a regulating thermostat (1 to 10 power levels) and a temperature indicator.