EPV Twilight Portable Series, POD120H-EPV User Manual

JA06202018 1 www.epvscreens.com

Twilight Portable Series (120" Models)

Outdoor/Indoor Portable Projection Screen

User’s Guide

Thank you for choosing the Yard Master Pro portable projection screen! Please read this user guide
before utilizing the screen. Correct usage and maintenance will ensure a long product life

Care & Use Instructions

◆ Elite highly recommends two people to assemble the Yard Master Pro screen.

◆ Please be sure to distinguish between the front and back of the screen fabric when setting up the

projection screen. CineWhite® UHD (front projection) and Wraith Veil (rear projection) are both labeled
front, back.

◆ Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the
points below to prevent that from occurring:

1. Do not touch the projection surface with your hands

2. Do not write or draw on the projection surface

3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen
material.

4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or
alcohol.

5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

◆ After using the screen, disassemble it and store it in the carrying bag provided.

◆ To avoid damage and injury, the screen should only be operated by adults.

Product Description

Design: The aluminum frame is designed to be light weight and easily operated making it easy to carry,
assemble and disassemble.

Screen Fabric: The screen fabric is attached to the rectangular frame and held in place by several pegs
along the frame, which ensure an evenly stretched and flat surface. The CineWhite® UHD (front
projection) and Wraith Veil (rear projection) screen materials are durable and can be folded many times
without causing damage or distortion to the surface.

JA06202018 2 www.epvscreens.com

Twilight Portable Frame Parts and Hardware

A. Folding frame x1

B. Left and right folding legs x2

C. Screen material bag x2

D. Projection screen material x2

E. Knob screw x6

F. Carrying Bag x1

G. Rope with ring x4

H. Stake x4

Note: The parts list above is subject to change without notice.

Correct usage of the projection screen will ensure better viewing results.

For front projection, assemble and view the screen as indicated in Fig.1.
For rear projection, assemble and view the screen as indicated in Fig.2.

Frame Assembly

1. Take the folding frame (A) out of the carrying bag (F) and place it on a flat surface. Fully unfold the
frame from the center, as shown below.

CineWhite™ UHD (front projection)/Wraith Veil (rear projection)

JA06202018 3 www.epvscreens.com

2. Next, unfold the smaller sections out.

3. Lastly, unfold one half of the frame from the other, as shown.

Note: When unfolding the frame and legs, be sure the latches on the hinges "click" into place. Please also
make sure all 4 corners of the frame are at a 90° angle and the hinged support bar is straight and not bent.

Leg and Screen Material Attachment

4. Carefully take the left and right folding legs (B) out of the carrying bag (F) and place it on a flat
surface. Unfold the vertical leg sections as shown.

Side View

Warning: The additional support sections, located at the bottom of the legs, may unfold on its own. Please be sure

to use caution while removing/placing the legs from/to the bag