![](/html/23/239f/239fd050e64a9145597804f64682bcdc48700e890b297c9cacf555c2c55dd16c/bg1.png)
Installation Manual on
Continuous ink supply system (CISS)
For printer EPSON C82/C80/C70
Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the
best device for an inkjet printer, and it will definitely decrease your printing costs.
Before using this system, please read this manual carefully. The pictures in this manual
may be different with the real ones. It’s just for your reference.
Note: The pictures in this manual may be different with the real ones. Here just
for your reference.
I. Opening Guide
1. Accessories
1) Continuous ink supply system ……………………………………………1
2) Air Filter ………………………………………………………………….1
3) Sponge …………………………………………………………………….1
4) Injector …………………………………………………………………….1
5) Long needle …………………………………………………………….....1
6) Short needle …………………………………………………………….....1
7) Protection clamp …………………………………………………………..1
8) Installation Manual ………………………………………………………..1
9) Certificate on free installation………………………………………………1
Pic. 1-1 Pic. 1-2
2. Inspection before installation
A. Check whether all the accessories are present.
B. Check whether the system is retrieved normally or too much air is remained in
the connecting tubes (length over 20cm).
II. Printer test
INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C82/C80/C70 1
![](/html/23/239f/239fd050e64a9145597804f64682bcdc48700e890b297c9cacf555c2c55dd16c/bg2.png)
1. Check printer status to see whether it is normal or not, and check its
mechanics for smooth and any damage.
2 Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is
normal (2-2, 2-3).
Pic. 2-1 Pic. 2-2, 2-3
3. If printer is alright, please print a picture to see the result.
Ill. Installation Procedures
1. Remove ink from the air balance tube
Place the system on the table, check if there is any ink in each of the air balance
tube. If yes, you need to remove the ink in the balance tubes by the following steps:
1) Pull out the sealed plug of the balance tube (3-1-1).
2) Use the injector to draw all ink out.
3) Put the sealed plug back.
4) Put the sealed plug back.
4) Pull refill plug out.
5) Inject ink to the ink tanks according to their color.
6) Put refill plug back.
7) Check all the plugs to make sure they are completely sealed.
Pic. 3-1-1 Pic.3-1-2
2. Replace the air balance plugs
2 INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C82/C80/C70