Page 1
EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT
GUIDE
POSPrinter (TM-T90)
Version 2.61 Feb. 2008
Page 2
Notes
(1) Reproduction of any part of this documentation by any means is prohibited.
(2) The contents of this documentation are subject to change without notice.
(3) Comments and notification of any mistakes in this documentation are gratefully
accepted.
(4) This software cannot be used with other equipment that the specified.
(5) EPSON will not be responsible for any consequences resulting from the use of any
information in this documentation.
Trademarks
Microsoft®, Windows®, Windows Vista™, Visual Basic® and Visual C++® are trademarks
or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
EPSON® and ESC/POS® are registered trademarks of SEIKO EPSON CORPORATION.
Other product and company names used herein are for identification purposes only and
may be trademarks or registered trademarks of their respective companies.
Copyright © 2000-2008 SEIKO EPSON CORPO RATI ON
Page 3
Version 2.61 Feb. 2008
iii
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Contents
SECTION 1. INTRODUCTION ......................................................................................1
SECTION 2. DETAILS ON SETTINGS.........................................................................2
2.1 References of Firmware Versions ..............................................................................2
2.2 Settings of DIP Switches ............................................................................................2
2.3 Port Information..........................................................................................................4
2.4 Device Settings ............................................................................................................6
2.4.1 Usable Device Specific Settings ..........................................................................6
2.4.2 Paper Type Setting...............................................................................................7
2.4.3 Paper Width Setting.............................................................................................7
SECTION 3. FUNCTION DETAILS ..............................................................................8
3.1 Property Set Values and Default Values ..................................................................8
3.1.1 Capability Set Values...........................................................................................8
3.1.2 List Properties ....................................................................................................10
3.1.3 Width and Height Properties ............................................................................11
3.1.4 Common Property Strings .................................................................................12
3.1.5 PageMode Print Properties ...............................................................................12
3.2 Methods......................................................................................................................13
3.3 Escape Sequences......................................................................................................14
3.4 Printable Barcode Type ............................................................................................15
3.5 Power Condition Reports..........................................................................................15
3.6 Synchronous Processing ...........................................................................................15
3.7 Printing Positions .....................................................................................................16
3.8 Electronic Logo Function (NVRAM)........................................................................16
3.9 Printable Bitmap Types and Sizes ..........................................................................17
3.10 Color Bitmap Printing ............................................................................................17
3.11 Maintenance Counter .............................................................................................18
3.12 Automatic Recovery Function ................................................................................18
3.13 Output without Flow Control on the USB/Ethernet Interfaces ..........................18
SECTION 4. WARNINGS .............................................................................................19
Page 4
Version 2.61 Feb. 2008
1
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Section 1. Introduction
This manual describes the method of use and related items, as well as machine-specific
precautions, when the EPSON TM-T90 Series POS Printers are used with the EPSON
OPOS ADK program.
This manual applies to the following devices.
Device List
Serial Parallel USB Ethernet
TM-T90 TM-T90P TM-T90U TM-T90E
TM-T90M TM-T90PM TM-T90MU TM-T90ME
Before reading the manual, see the following explanation about the characteristic of the
TM-T90 models.
Station: Receipt (Line Thermal 180 dpi X 180 dpi)
2-Color Printing
Throughout the manual, the various model names will be referr ed t o as TM-T90.
Compatibility mode
The compatibility mode for upward compatibility was added in OPOS Ver2.60.
For the details of the compatibility mode, please refer to “EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT GUIDE Compatibility Mode”.
Page 5
Version 2.61 Feb. 2008
2
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Section 2. Details on Settings
This section describes connection configurations and how to make the settings for the
TM-T90 printers.
2.1 References of Firmware Versions
Refer to the release notes (Relnote.txt).
2.2 Settings of DIP Switches
Confirm that the following settings have been made correctly.
1) Serial port
DIP-SW1 DIP-SW2
No. Setting No. Setting
1 OFF Settable 1 OFF Fixed at OFF
2 ON Settable
3 OFF Fixed at OFF
4 OFF Fixed at OFF
5 OFF Settable
6 OFF Settable
7 ON Settable
8 OFF Settable
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Set DIP-SW1-2 (Interface condition selection).
If this DIP Switch is ON , co mm un ic ati ons settings are set via DIP Switches. If the
DIP Switch is OFF, Memory Switches are used.
Set DIP-SW1-3 (Handshake) to DTR/DSR.
Set DIP-SW1-4 (Bit length) to 8 bits.
Set DIP-SW1-5 to DIP-SW1-8 accordance with the port information.
The described set values are the default values. For the details, refer to the
product manual of the POSPrinter. Also, if these settings are changed, make
sure to change the port information using the SetupPOS utilit y.
Page 6
Version 2.61 Feb. 2008
3
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Do not change the current settings of DIP-SW2-1.
2) Parallel Port
DIP-SW1 DIP-SW2
No. Setting No. Setting
1 OFF Settable 1 OFF Fixed at OFF
2 OFF Fixed at OFF
3 OFF Fixed at OFF
4 OFF Fixed at OFF
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 OFF Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Do not change the current settings of DIP-SW2-1.
Make other settings in accordance with the settings described above.
3) USB Port
DIP-SW1 DIP-SW2
No. Setting No. Setting
1 OFF Settable 1 OFF Fixed at OFF
2 OFF Fixed at OFF
3 OFF Fixed at OFF
4 OFF Fixed at OFF
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 OFF Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Do not change the current settings of DIP-SW2-1.
Page 7
Version 2.61 Feb. 2008
4
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Make other settings in accordance with the settings described above.
4) Ethernet Port
DIP-SW1 DIP-SW2
No. Setting No. Setting
1 OFF Settable 1 OFF Fixed at OFF
2 OFF Fixed at OFF
3 OFF Fixed at OFF
4 OFF Fixed at OFF
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 OFF Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Do not change the current settings of DIP-SW2-1.
Make other settings in accordance with the settings described above.
2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Item Setting range
Baud rate [bps] 2400,4800,9600,19200,38400 *1,
57600
*1
,115200 *1
Bit length [bit] 8
Parity NONE, ODD, EVEN
Stop bit [bit] 1
Handshake DTR/DSR
Output buffer length [byte] 32 to 1024
Output interval time [ms] 0 to 9999
*1
These Baud rate require setting via Memory Switch.
Page 8
Version 2.61 Feb. 2008
5
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
The default settings are as shown in the following table.
Item Setting range
Baud rate [bps] 19200
Bit length [bit] 8
Parity NONE
Stop bit [bit] 1
Handshake DTR/DSR
Output buffer length [byte] 1024
Output interval time [ms] 2500
2) Port information when using parall el por t
The port information that can be set with the SetupPOS utility is as follows.
Item Setting range
Output buffer length [byte] 32 to 1024
Output interval time [ms] 0 to 9999
The default settings are as shown in the following table.
Item Setting range
Output buffer length [byte] 1024
Output interval time [ms] 2500
3) Port information when using USB port
The port information that can be set with the SetupPOS utility is as follows.
Item Setting range
Output interval time [ms] 0 to 9999
The default setting is as shown in the following table.
Item Setting range
Output interval time [ms] 2500
Page 9
Version 2.61 Feb. 2008
6
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
4) Port information when using Ethernet por t
The port information that can be set with the SetupPOS utility is as follows.
Item Setting range
Output buffer length [byte] 32 to 1024
Output interval time [ms] 0 to 9999
The default settings are as shown in the following table.
Item Setting range
Output buffer length [byte] 1024
Output interval time [ms] 2500
2.4 Device Settings
The following explanation is about the settings for TM-T90.
2.4.1 Usable Device Specific Settings
For the TM-T90, the following device specific settings are settable by the
SetupPOS utility. For the detail, please refer to the Section 2 of “EPSON OPOS
ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM
Series)”.
Tab Settings
Disable panel buttons
Assume print complete when data output finishes
Ignore firmware version check
Homogenize Error Codes
General
Output complete timeout
Paper Type Paper
Paper Width [mm]: LineWidth [dot]: LineCharsList
Bitmap TMFlogo...
Method
Brightness
Primary
Color Bitmap
Secondary
Page 10
Version 2.61 Feb. 2008
7
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
ERROR
OFFLINE
Log file name (include full path)
Status Log
Maximum file size [KB]
Default Value *1 Multilingual font
*1
Available only for the Multilingual character model.
2.4.2 Paper Type Setting
The TM-T90 models support the following paper type. After adding the TM-T90
by the SetupPOS utility, open the “Device Specific Settings” dialog box. In the
“Paper” tab the paper type could be selected..
The settable paper types are as follows:
Normal
2-Color Thermal
The default paper type is set to Normal.
2.4.3 Paper Width Setting
The TM-T90 models support the following paper width. After adding the TM-T90
by the SetupPOS utility, open the “Device Specific Settings” dialog box. In the
“Paper” tab the paper width could be selected..
The settable paper widths are as follows:
79.5 mm [512 dots]
59.5 mm [384 dots]
57.5 mm [360 dots]
The default paper width is set to 79.5 mm.
Page 11
Version 2.61 Feb. 2008
8
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Section 3. Function Details
This section describes the functions of the TM-T90 printers in details. Supplementary
explanation of the parts not described in detail in the "UPOS" is also given here.
3.1 Property Set Values and Default Values
The following explanation is about the property set values and the default values.
3.1.1 Capability Set Values
The following values are the Capability set v alues.
Capability Name Set Value
CapTransaction TRUE
CapCoverSensor TRUE
CapConcurrentRecSlp FALSE
CapConcurrentJrnSlp FALSE
CapConcurrentJrnRec FALSE
CapConcurrentPageMode FALSE
CapCharacterSet PTR_CCS_ASCII
*1
CapMapCharacterSet FALSE
CapJrnUnderline FALSE
CapJrnNearEndSensor FALSE
CapJrnItalic FALSE
CapJrnEmptySensor FALSE
CapJrnDwideDhigh FALSE
CapJrnDwide FALSE
CapJrnDhigh FALSE
CapJrnColor 0
CapJrnCartridgeSensor 0
CapJrnBold FALSE
CapJrn2Color FALSE
CapJrnPresent FALSE
CapRecPageMode TRUE
CapRecUnderline TRUE
CapRecStamp FALSE
CapRecRotate180 TRUE
CapRecRight90 TRUE
CapRecPapercut TRUE
CapRecNearEndSensor TRUE
Page 12
Version 2.61 Feb. 2008
9
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
CapRecMarkFeed 0
CapRecLeft90 TRUE
CapRecItalic FALSE
CapRecEmptySensor TRUE
CapRecDwideDhigh TRUE
CapRecDwide TRUE
CapRecDhigh TRUE
CapRecColor PTR_COLOR_PRIMARY
PTR_COLOR_CUSTOM1
*2
CapRecCartridgeSensor 0
CapRecBold TRUE
CapRecBitmap TRUE
CapRecBarCode TRUE
CapRec2Color TRUE
*2
CapRecPresent TRUE
CapSlpUnderline FALSE
CapSlpRotate180 FALSE
CapSlpRight90 FALSE
CapSlpNearEndSensor FALSE
CapSlpLeft90 FALSE
CapSlpItalic FALSE
CapSlpEmptySensor FALSE
CapSlpDwideDhigh FALSE
CapSlpDwide FALSE
CapSlpDhigh FALSE
CapSlpColor 0
CapSlpCartridgeSensor 0
CapSlpBothSidesPrint FALSE
CapSlpBold FALSE
CapSlpBitmap FALSE
CapSlpBarCode FALSE
CapSlp2Color FALSE
CapSlpFullslip FALSE
CapSlpPresent FALSE
CapSlpPageMode FALSE
*1
If Multilingual character model, “PTR_CCS_KANJI” is set.
*2
Accordance with the selected paper in the SetupPOS utility, the set value will differ.
When selecting Normal Paper (Default), two colors print cannot be executed.
Page 13
Version 2.61 Feb. 2008
10
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.1.2 List Properties
The List Properties are explained in the following.
List Property Settings
CharacterSetList "255,437,850,852,858,860,863,865,866,998,999,
1252"
*1
JrnLineCharsList “”
RecLineCharsList
(When 79.5 mm is set)
“42,56”
RecLineCharsList
(When 59.5 mm is set)
“32,42”
RecLineCharsList
(When 57.5 mm is set)
“30,40”
SlpLineCharsList “”
RecBarCodeRotationList “0,R90, L90, 180”
RecBitmapRotationList “0,R90, L90, 180”
SlpBarCodeRotationList “”
SlpBitmapRotationList “”
FontTypefaceList “”
*1
If Multilingual character model, “936” or “950” is added to the list.
Page 14
Version 2.61 Feb. 2008
11
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.1.3 Width and Height Properties
The width and height properties are explained in the following.
Settings
Property
Default
Value
Maximum
value [dot]
Minimum
value [dot]
RecLineSpacing 30 127 24 *1
JrnLineSpacing X X X
SlpLineSpacing X X X
SlpLineHeight [dot] X
RecLineHeight [dot] 24,17
JrnLineHeight [dot] X
SlpLineWidth [dot] X
RecLineWidth [dot]
(When 79.5 mm is set)
512
RecLineWidth [dot]
(When 59.5 mm is set)
384
RecLineWidth [dot]
(When 57.5 mm is set)
360
JrnLineWidth [dot] X
RecSidewaysMaxLines 17
*3
RecSidewaysMaxChars
(When Font A is selected)
138 *4
RecSidewaysMaxChars
(When Font B is selected)
184 *4
RecLinesToPaperCut 5
*2
SlpSidewaysMaxLines X
SlpSidewaysMaxChars X
SlpMaxLines X
X: No settings
*1
In the case of a line thermal station, the Line Spacing setting is identical with the height
of the characters which means that it can be set at up to 17 when Font B is selected.
*2
It can be changed by the settings of the RecLineSpacing or the character height.
*3
It can be changed by the settings of the RecLineSpacing or the RecLineHeight.
The value differs accordance with the selected paper width.
*4
It can be changed by the settings of the font width, or the selected paper type.
Page 15
Version 2.61 Feb. 2008
12
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.1.4 Common Property Stri ngs
The Device information properties are described below.
I/F DeviceName DeviceDescription
TM-T90 EPSON TM-T90 POS Printer S
TM-T90M EPSON TM-T90M POS Printer
TM-T90P EPSON TM-T90P POS Printer P
TM-T90PM EPSON TM-T90PM POS Printer
TM-T90U EPSON TM-T90U POS Printer U
TM-T90MU EPSON TM -T90MU POS Printer
TM-T90E EPSON TM-T90E POS Printer E
TM-T90ME EPSON TM-T90ME POS Printer
I/F indicate the connected interface.
The following is the list of the four connecting interfaces.
S: Serial
P: Parallel
U: USB
E: Ethernet
3.1.5 PageMode Print Properties
The Device information properties are described below.
Station
*2
Property
Journal Receipt Slip
PageModeArea - (monochrome)
(80.0mm)“512”, “831”
(60.0mm)“384”, “831”
(58.0mm)“384”, “831”
(2-color)
(80.0mm)“512”, “415”
(60.0mm)“384”, “415”
(58.0mm)“360”, “415”
-
PageModeDescriptor *1 - BM/BC/BMR/BCR -
*1
Following setting values are used for the PageModeDescriptor property.
BM : Bitmap printing is available.
BC : Barcode printing is available.
BMR : Rotated printing of bitmap is available.
BCR : Rotated printing of barcode is available.
*2
If the Station’s CapRecPageMode property value is FALSE, the PageModeArea property
shall have ” ” and the PageModeDescriptor property shall have ”0” respectively as a
setting value.
Page 16
Version 2.61 Feb. 2008
13
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.2 Methods
The following explanation is about supported/unsupported Methods, and the
detailed information.
Method Supported/Unsupported Compatibility with the
PageMode printing
PrintNormal O O
PrintTwoNormal X X
PrintImmediate O O
*2
PrintBarCode O O
*3
PrintBitmap O O
*4
PrintMemoryBitmap O O
*4
CutPaper O (1~100: One point remains
uncut / Full cut
*1
)
X
MarkFeed X X
ChangePrintSide X X
ValidateData O O
TransactionPrint O O
SetLogo O O
SetBitmap O O
RotatePrint O X
EndRemoval X X
BeginRemoval X X
EndInsertion X X
BeginInsertion X X
ClearPrintArea O O
PageModePrint O O
O: Supported
X: Unsupported
*1
Full cut (completely cut) is possible as a dealer option.
*2
If the specified Station is ready to print, the printing data shall not be stored in the
PageMode printing buffer but, instead, go straight to printing. If the Station is not
ready to print, an error is returned.
*3
If other than “LEFT” is specified for the printing position of barcode, the printing shall
be done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
*4
If other than “LEFT” is specified for the printing position of bitmap, the printing shall
be done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
Page 17
Version 2.61 Feb. 2008
14
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.3 Escape Sequences
The following figure is about supported/unsupported Escape Sequences.
Escape Sequence Receipt Compatibility with the
PageMode printing
#P 0~100 X
#fP 0~100 X
#sP X X
sL X X
#B O O
tL O O
bL O O
#R O O
#lF 0~9999 O
#uF 0~ approx. 50 cm O
#rF Maximum [inch] X X
#E 0~65535 X
#fT X X
bC O O
!bC O O
#uC 1~2 O
iC X X
!iC X X
#rC 1~2
*1
O
rvC O O
!rvC O O
#sC X X
#fC X X
tbC X X
!tbC X X
tpC X X
!tpC X X
1C O O
2C O O
3C O O
4C O O
#hC 1~8 O
#vC 1~8 O
cA O O
*2
rA O O
*2
lA O O
N O O
O : Supported
X : Unsupported
Page 18
Version 2.61 Feb. 2008
15
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Numbers: Settable range
*1 When selected paper is Normal Paper, its settable range is 1.
*2 Regardless of the PageModeHorizontalPosition property setting, center or right adjust
what is to be printed based on the PageModePrintArea property setting in the horizontal
direction.
3.4 Printable Barcode Type
The TM-T90 models allow the following barcode types.
Code 128
Code 128 Parsed
Code 93
Codabar
ITF
Code 39
JAN 13 (EAN 13)
JAN 8 (EAN 8)
UPC-E
UPC-A
PDF 417
For the PDF 417 type, the maximum height is limited to 831 dots for 2-color
thermal paper, 1662 dots for normal thermal paper.
3.5 Power Condition Reports
The TM-T90 models support Power Condition Reports as follows.
Powered on reporting: Supported
Powered off reporting: Supported
3.6 Synchronous Processing
The TM-T90 models support the Process ID for the Synchronous Processing.
Page 19
Version 2.61 Feb. 2008
16
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.7 Printing Positions
The TM-T90 models support the function for setting printing position.
Function Receipt
Left margin O
Printing Position O
O : Supported
X : Unsupported
When the left margin setting function is supported, it is possible to specify the
horizontal printing position of the bitmap or barcode by dots unit.
When the printing position settings are supported, it is possible to specify the
horizontal printing position of the text, bitmap, or the barcode to the left, center, or
the right side of the paper.
3.8 Electronic Logo Function (NVRAM)
The TM-T90 models feature a function for electronic logo. To use the electronic
logo function (NVRAM), start “TMFlogo utility” from the “Device Specific Settings”
of SetupPOS utility, and register image files (BMP style) at the function in
advance. For the details of the registration, please refer to the “Help” of
“TMFlogo utility” and/or “EPSON OPOS ADK MANUAL User’s Manual TMFlogo
Utility”.
To print the registered image file, please use the following DirectIO.
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2
For the details of the printing, please refer to t he Sect ion 4 of “ EPSO N OPOS
ADK APPLICATION DEVELOPMENT GUIDE POSPrinte r ( TM Ser ies) ” . The
available NVRAM size for the TM-T90 is 393216 bytes.
Page 20
Version 2.61 Feb. 2008
17
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.9 Printable Bitmap Types and Sizes
The TM-T90 models support the following bitmap commands. For the detail,
please refer to the Section 3 of “EPSON OPOS ADK MANUAL APPLICATION
DEVELOPMENT GUIDE POSPrinter (TM Series)”. The allowance ranges for
bitmaps are as follows.
Bitmap command type Allowance range
x (x x 8 dots) y (y x 8 dots) xy Download bitmap
1~2040
1~384 Receipt:
<= 98304
Raster bitmap 1~1024 1~4095
Color bitmap 1~1024 (TM^T90)
1~415
(TM^T90M)
1~369
Even if meet with the limitation described above, a bitmap that extend the
paper width cannot be printed.
When a height of the raster bitmap expands the value described above, the
SO (Service Object) will automatically separates the bitmap data into
multiple bitmaps, then print the multiple bitmaps data as one connected
bitmap.
3.10 Color Bitmap Printing
The TM-T90 models support color bitmap printing.
If a 16-color or a 256-color bitmap file is supplied, the image may be printed
using 2 colors. If the original file is a 2-color bitmap, it will be printed in
monochrome. The halftone method may be set using the “Device Specific
Settings” dialog box.
To print an image using 2 colors, 2-color thermal paper must be selected in the
“Device Specific Settings” dialog box and 2-color thermal receipt paper must be
supplied in the printer.
Page 21
Version 2.61 Feb. 2008
18
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.11 Maintenance Counter
The TM-T90 models feature a maintenance counter function for retaining an
operation log of the printer. The following chart shows the available maintenance
counters for the TM-T90.
Counter number
Hexadecimal
Counter Unit Max. Value Counter
Type
14 Paper feed in number of
lines: Roll paper
Lines 143,165,576 Resettable
15 Number of head
energizations: Roll paper
Times 4,294,967,295 Resettable
32 Number of auto-cutter
operations
Times 4,294,967,295 Resettable
46 Uptime of product Hours 71,582,788 Resettable
94 Number of paper feed
lines: Roll paper
Lines 143,165,576 Cumulative
95 Number of head
energizations: Roll paper
Times 4,294,967,295 Cumulative
B2 Number of auto-cutter
operations
Times 4,294,967,295 Cumulative
C6 Uptime of product Hours 71,582,788 Cumulative
3.12 Automatic Recovery Function
The TM-T90 models feature a function for automatic recovery when the power is
turned on again after an interruption of power. Recovery processing is performed
automatically when the printer’s power is turned on again after an interruption.
The recovery processing restores the printer to the condition it was in before the
power was turned off.
3.13 Output without Flow Control on the USB/Ethernet Interfaces
The TM-T90 models support outputting without flow control on the USB/Ethernet
interfaces.
Page 22
Version 2.61 Feb. 2008
19
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Section 4. Warnings
This section describes precautions in use of TM-T90.
• If 2-color thermal paper is selected from the “Device Specific settings” dialog box,
2-color thermal receipt paper must be used in the printer.
• When parallel I/F is used with W indows 2000, Windows XP or Windows Vista,
please set Busy Condition of Memory SW1-3 to "ON" (Buffer full).
Loading...