AXIS 1440 Network Print Server for EPSON Printers
printer connector
Ethernet 10BaseT |
test button |
connector |
|
|
network indicator |
|
power indicator |
external power |
|
supply connector |
|
Novell® NetWare™:Versions 3.11, 3.12, 4.10 and above, supporting both NDS and Bindery Emulation. At least 16 bindery files servers and 96 print queues can be served. User messages also supported. Print methods include RPRINTER/NPRINTER, PSERVER.
IBM®
LAN Server™: LAN Server 1.3 and above, running under OS/2 version 1.3 and above, including OS/2 Warp, OS/2 Warp Connect.
Microsoft®
Windows: Windows NT version 4.0 and above, Windows 95, Windows 98, Windows 3.1, and Windows for Workgroups.
LANtastic®: Windows for Workgroups, Windows 95 and Windows 98 clients using LANtastic 7.0 and above.
Apple® EtherTalk™:Print method: AppleTalk™ Phase 2.
UNIX: |
Any UNIX system that supports LPR |
WWW:Netscape Navigator 3.0, Microsoft Internet Explorer 3.0, or compatible Web browsers.
NetWare: |
IPX, SAP, RIP, SPX, NCP (extended with |
|
NDS) and LIP. |
Windows/OS/2®: |
NetBIOS/NetBEUI, TCP/IP, WINS/ |
|
NBT. |
TCP/IP: |
LPD, FTP, BOOTP, DHCP, ARP, |
|
RARP, ICMP, IP, TCP, UDP, HTTP, |
|
TFTP, SNMP, SLP. |
Apple EtherTalk: AARP, ATP, DDP, NBP, PAP, RTMP,
ZIP.
EPSON Stylus® COLOR 740, EPSON Stylus COLOR 850, EPSON Stylus Photo EX, EPSON Stylus Photo 700
Hardware: |
32 bit RISC controller, 1 MB flash |
|
memory, 256 Kb RAM |
Attachments: |
RJ-45 connector 10BaseT (Twisted Pair) |
|
Ethernet |
Parallel Port |
IEEE 1284 |
Dimensions: |
1.1 inches (H) × 2.2 inches (W) × 4.7 |
|
inches (D) (2.7 cm × 5.6 cm × 11.8 cm) |
Weight: |
0.26 lb (0.12 Kg) |
Power |
|
Consumption: |
Maximum 170 mA at 12 VDC (Type PS- |
|
A, 9 V, 300 mA). Power provided by |
|
external source. |
Temperature: |
40 to 105 °F (5 to 40 °C) |
Humidity: |
10 to 95% non-condensing |
EMC: |
EN 55022/1994, EN 50082-1/1992, |
|
FCC Class A |
Safety: |
EN 60950 |
8/98 |
AXIS 1440 Print Server for EPSON Printers - 1 |
AXIS 1440 Network Print Server for EPSON Printers
The following table describes how to use the test button.
Power |
|
|
Condition |
Action |
Result |
|
|
|
ON |
Push once. |
Prints a test page to check |
|
|
the connection to the |
|
|
printer. |
|
|
|
ON |
Push twice. |
Prints a parameter list |
|
|
showing the AXIS 1440 |
|
|
settings. |
|
|
|
OFF (unplugged) |
Hold down for more |
Resets the AXIS 1440 |
|
than 5 seconds. |
parameter settings to |
|
|
factory default values. |
|
|
|
The following table describes the indicator lights on the AXIS 1440:
Indicator |
Print Server Status |
|
|
Network |
Flashes to indicate network activity. |
|
|
Power |
Normally ON when power is ON. If it flashes or |
|
does not light, there is a problem with the AXIS |
|
1440 or its power supply. |
|
|
1.Set up your EPSON printer and install the printer software on each computer that will print over the network.
2.Attach the AXIS 1440 Print Server to your EPSON printer and connect it to the network.
3.Install the AXIS software on server workstations, if setting up a shared printer.
4.Install the AXIS software on client workstations, if printing in peer-to-peer mode.
5.Set up the AXIS 1440 for your network.
6.Configure each workstation’s printer port to use the AXIS 1440 Print Server.
See the following table to find your network configuration (operating system and protocol) and determine what to install.
|
Network |
|
|
Operating |
protocol/ |
What you need to install and |
|
system |
configuration |
configure |
|
|
|
|
|
Windows 95/98/ |
TCP/IP (LPR) |
1. |
Install AXIS Print Monitor. |
NT |
|
2. |
Configure your AXIS 1440 for |
|
|
|
TCP/IP. |
|
|
3. |
Configure workstation printer |
|
|
|
ports to use the AXIS 1440. |
|
|
|
|
|
Novell |
1. |
Install AXIS NetPilot. |
|
NetWare |
2. |
Use AXIS NetPilot Installation |
|
|
|
Wizard to set up the AXIS |
|
|
|
1440 for the network. |
|
|
3. |
Configure workstation printer |
|
|
|
ports to use the AXIS 1440. |
|
|
|
|
|
NetBIOS/ |
1. |
Install AXIS NetPilot and use |
|
NetBEUI |
|
the AXIS NetPilot Installation |
|
|
|
Wizard to set up the AXIS |
|
|
|
1440 for the network.* |
|
|
2. |
Install AXIS Print Monitor. |
|
|
3. |
Configure workstation ports to |
|
|
|
use the AXIS 1440. |
|
|
|
|
Windows 3.1**/ |
peer-to-peer |
1. |
Install AXIS Print Utility on all |
Windows for |
printing |
|
workstations. |
Worksgroups |
(NetBIOS/ |
2. |
Configure workstation printer |
|
NetBEUI or |
|
ports to use the AXIS 1440. |
|
TCP/IP) |
|
|
|
|
|
|
|
client-server |
1. |
Install AXIS Print Utility on the |
|
printing |
|
server. |
|
(NetBIOS/ |
2. |
Set up the printer for sharing on |
|
NetBEUI or |
|
the server. |
|
TCP/IP) |
3. |
Configure clients’ ports to use the |
|
|
|
printer. |
|
|
|
|
|
Novell |
1. |
Install AXIS NetPilot. |
|
NetWare |
2. |
Use the AXIS NetPilot Installation |
|
|
|
Wizard to set up the AXIS 1440 |
|
|
|
for the network. |
|
|
3. |
Configure workstation printer |
|
|
|
ports to use the AXIS 1440. |
|
|
|
|
Macintosh |
AppleTalk |
Select your AT printer driver in the |
|
|
|
Chooser. |
|
|
|
|
|
IBM OS/2 |
NetBIOS/ |
1. |
Install AXIS Print Utility for OS/2. |
|
NetBEUI |
2. |
Use AXIS Print Utility for OS/2 to |
|
|
|
set up your printer port. |
|
|
3. |
Create a shared print queue. |
|
|
|
|
UNIX (LPR only) |
TCP/IP |
1. |
Configure your AXIS 1440 for |
|
|
|
TCP/IP. |
|
|
2. |
Copy the axinstall script to your |
|
|
|
hard disk. |
|
|
3. |
Create an LPR print queue on your |
|
|
|
UNIX system. |
|
|
4. |
Edit the LPR print queue |
|
|
|
description. |
|
|
|
|
*You don’t need to use the NetPilot Installation Wizard if you don’t plan to change the print server name.
**Windows 3.1 workstations must be running LAN Manager Workstation client software to print to a network printer.
2 - AXIS 1440 Print Server for EPSON Printers |
8/98 |