Epson C13S050520 Product Data Sheet
Material Safety Data Sheet
In accordance with EU REACH Regulation (EC) No 1907/2006, EPSON has considered that a Safety Data Sheet is not required for the toner contained in this cartridge. To insure Epson's compliance with REACH information requirements, we will provide preparation information under the following format. Epson is not obliged to provide this information within European local languages.
1. Identification of The Substance/Preparation and of The Company/Undertaking
1.1. Identification of the preparation: |
|
Standard Capacity Developer Cartridge S050520 |
|
1.2. Use of the substance/preparation: |
Laser Printing |
||
1.3. Company/undertaking identification |
|
||
Manufacturer/Distributor: |
EPSON EUROPE B.V. |
||
Address: |
|
Entrada 701, |
|
|
|
1096 EJ AMSTERDAM |
|
|
|
The Netherlands |
|
|
|
www.epson-europe.com |
|
TEL: |
+31-20-314-5000 |
FAX: +31-20-314-5100 |
|
e-mail: |
|
chemicals@epson-europe.com |
|
Date Prepared: |
24 September 2009 |
||
Revision: |
|
A |
|
1.4. Emergency telephone: |
Giftnotruf Berlin +49 030 19240 |
||
2.Hazards Identification
2.1.Emergency Overview:
This toner does not meet the criteria for dangerous classification according to EU Directive 1999/45/EC. This toner is a Black powder that may cause eye irritation. Avoid contact with eyes or clothing. In
the case of skin contact, wash with soap and water. Keep out of reach of children.
2.2. Potential Health Effects:
Eyes: Toner contact with eye may be mildly irritating.
Skin: Toner contact with skin may cause irritation, swelling or redness. Inhalation: Prolonged inhalation of excessive toner may cause respiratory tract irritation. Ingestion: May cause upset stomach.
3. Composition/Information on Ingredients
This toner is a preparation.
Composition |
CAS No. |
EEC No. |
EU registration |
% By |
EU |
EU |
EU |
Remark |
|
|
|
No. |
Weight |
Symbols |
R-phrase |
OELs |
|
|
|
|
|
|
|
|
|
|
Polyester resin |
Trade |
Trade |
Not available |
> 85 |
None |
None |
None |
None |
|
secret |
secret |
for the moment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wax |
Trade |
Trade |
Not available |
< 10 |
None |
None |
None |
None |
|
secret |
secret |
for the moment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbon black |
1333-86-4 |
215-609-9 |
Not available |
< 10 |
None |
None |
None |
None |
|
|
|
for the moment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pigments |
Trade |
Trade |
Not available |
< 10 |
None |
None |
None |
None |
|
secret |
secret |
for the moment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amorphous silica |
7631-86-9 |
231-545-4 |
Not available |
< 1 |
None |
None |
None |
None |
|
|
|
for the moment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MSDS Standard Capacity Developer Cartridge S050520 |
Version 6.1 |
Page 1 of 4 |
Release Date 24 September 2009 |
4.First Aid Measures
4.1.Eyes: Immediately flush with room temperature, low pressure and clean water for at least 15 minutes. Seek
medical attention if eye irritation continues.
4.2. Skin: Wash surface areas with soap and water. Wash soiled clothing before re-wearing. Consult a physician if irritation continues.
4.3. Inhalation: Remove subject to ventilated fresh air. If not breathing, give artificial respiration right away. If breathing is difficult, give oxygen. Seek immediate medical attention.
4.4.Ingestion: Seek medical advice; and attention if stomach continues to be upset.
5.Fire-Fighting Measures
5.1. Flammability: |
This material has no unusual fire or explosive hazards. |
5.2.Extinguishing Media: Dry chemical, carbon dioxide or water spray
5.3.Fire Fighting Instructions: No special fire fighting procedures are required other than breathing apparatus.
No special explosion hazards are known.
6.Accidental Release Measures
6.1.Personal precautions: Eye or Skin protection required during clean-up.
6.2.Environmental precautions: Do not release to sewer, surfaceor ground-water.
6.3.Methods for cleaning up: Use wet sponges or cloths to wipe-up the materials, then rinse area with damp
cloth. Place waste in closed container for disposal. Do not dispose of waste to the sewer. Wash hands with soap and water.
7.Handling And Storage
7.1.Handling: Keep out of reach of children. Do not dismantle cartridge.
7.2.Storage: Do not store the cartridge in high or freezing temperatures. Keep cartridge out of direct
sunlight. Do not store cartridges with oxidizing agents or explosives.
7.3.Specific use(s): Not specified
8.Exposure Controls and Personal Protection
8.1.Exposure limit values:
As total dust
US: ACGIH-TLV is: 10mg/m3 US: OSHA-PEL is: 15mg/m3 Germany: DFG-MAK is: 4mg/m3
Australia: Worksafe-TWA is: 10mg/m3
8.2. Exposure Controls:
8.2.1. Occupational exposure control
Proper ventilation, in prevention
8.2.1.1. Respiratory protection
Not required under suitable use as setting the cartridge on the printer.
8.2.1.2. Hand protection
Not required under suitable use as setting the cartridge on the printer.
8.2.1.3. Eye protection
Not required under suitable use as setting the cartridge on the printer.
8.2.1.4. Skin protection
Not required under suitable use as setting the cartridge on the printer.
8.2.2. Environmental exposure control
Not established
MSDS Standard Capacity Developer Cartridge S050520 |
Version 6.1 |
Page 2 of 4 |
Release Date 24 September 2009 |
Loading...