Epson C12C824142, C824 Series Handling Instructions Manual

Download

(C824✽✽✽)

Bluetooth Photo Print Adapter

Handling Instructions

4046151-00

xxx

Safety Instructions

Caution:

❏ Do not use this product inside medical facilities or near medical

equipment. Radio waves from this product may adversely affect the operation of electrical medical equipment.

❏ Keep this product at least 22 cm away from cardiac pacemakers. Radio

waves from this product may adversely affect the operation of cardiac pacemakers.

❏ Do not use this product near automatically controlled devices such as

automatic doors or fire alarms. Radio waves from this product may adversely affect these devices, and could lead to accidents due to malfunction.

❏ Do not disassemble or modify this product. Doing so could result in

injury, electric shock, or fire.

About the Bluetooth Photo Print Adapter

This product is a wireless communication module that employs Bluetooth wireless technology.

Note:

❏ While this product complies with the Bluetooth Specification, it is not

guaranteed to work with all devices enabled with Bluetooth wireless technology.

❏ The communication range of this product is approximately 10 meters;

however, this may vary depending on conditions including obstacles between devices; signal quality; magnetic fields; static electricity and electromagnetic interference; software; operating system; reception sensitivity; and antenna performance.

❏ For customer support information, please refer to your printer’s or

all-in-one’s documentation.

Connecting and Disconnecting the Bluetooth Photo Print Adapter

Refer to the printer’s or all-in-one’s documentation for how to connect and disconnect the adapter.

Bluetooth Settings

Printer / all-in-one

Refer to the printer’s or all-in-one’s documentation for how to make settings for Bluetooth wireless communication.

Digital still camera / digital video camera / PDA / mobile PC

Refer to the device’s documentation for more information.

Specifications

Communication system

Output power Bluetooth Power Class 2 Frequency band ISM band 2402–2480 MHz Communication range Line-of-sight distance: Approximately 10 m

Bluetooth Specification Version 1.1

This may vary depending on conditions including obstacles between devices; signal quality; magnetic fields; static electricity and electromagnetic interference; software; operating system; reception sensitivity; and antenna performance.

Light Anzeige Voyant Indicador Indicatore Indicador luminoso Licht

Connector Stecker Connecteur Conector Connettore Conector Connector

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. EPSON is a registered trademark of Seiko Epson Corporation.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Seiko Epson Corporation is under license.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

English

Wireless Regulatory Information

For North American Users

USA

This product conforms to part 15 of the FCC rules. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation of the device. FCC WARNING Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

CANADA

This product conforms to IC, Low Power License-Exempt Radio communication Devices (RSS-210) Epson cannot accept responsibility for any failure to satisfy the protection

requirements resulting from a non-recommended modification of the product.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation of the device. FCC part 15 Subpart B Class B NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However there is not guarantee that interference will not occur in a particular installation. If this equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

For Australian and New Zealander Users

Epson hereby declares that this product, EU-84, is in compliance with the essential requirements and other relevant provisions of AS/NZS 4771:2000. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.

For European Users

Epson hereby declares that this product, EU-84, is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, also known as the R&TTE Directive, in the following countries:

Austria, Belgium, Denmark, Estonia, Finland, France, Germany, Greece, Iceland, Italy, Ireland, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and United Kingdom.

Only indoor operation is permitted in France. License is required for use in Italy. Epson cannot accept responsibility for any failure to satisfy the protection