This guide contains selected information on how to use the
printer and frequently used features of the printer.
See the User’s Guide (online manual) for detailed instructions
on using the printer.
Home Screen Operations ....................................... 2
Getting Ready to Print ............................................. 4
Printing at Non-Standard Sizes ............................10
Printing Outside the Oce .................................... 12
Home Screen Operations
Approx. remaining levels of
consumables
As the ink is consumed or the maintenance box
becomes full, the corresponding bar becomes
shorter.
When a is displayed on bars, prepare a new ink
cartridge or a maintenance box. You can continue
printing until replacement is required.
Touch this icon…
You can see the consumable product numbers.
The network connection status
The icon changes according to the connection method.
While the printer is connected,
the signal strength.
Wired (Ethernet)
is blue and indicates
Wi-Fi (Wireless)
Wi-Fi Direct
Touch this icon…
You can change the connection method.
For information on Wi-Fi Direct, see below.
U
“Printing Outside the Oce” on page 12
The current printer status
Touch to load or remove paper.
U
“Getting Ready to Print” on page 4
Touch to check the printer status or
change the printer settings.
When you connect a compatible Epson scanner to the printer, the
Enlarged Copy button appears.
The Settings button appears when you touch .
2
The home screen is displayed when the printer is turned on.
These pages show the available operations on the home screen.
The number of notices
The number of notices, such as ink low warnings, is displayed on the icon.
Touch this icon…
A list of the notices that require your action is displayed. You can see instructions on what to do when you
touch each notice.
When you complete the actions for all the notices, the number disappears from the icon.
Roll paper information
The paper type and roll paper width that have been set are displayed.
Touch after loading roll
paper...
You can perform actions such as replacing
roll paper.
Touch before loading roll
paper...
Instructions on how to load roll paper are displayed.
Touch Panel Operations
Touch (tap)
Slide
The scroll bar is displayed
when you can scroll up and
down.
3
Getting Ready to Print
Check the Paper Loading
Positions
Roll Paper
Auto Sheet Feeder
A4 to A3
Multiple sheets can be
set at a time
*
Load the Paper Following the
On-Screen Instructions
Touch Paper Setting.
A
Select one of the paper sources.
B
* The number of sheets loaded at one time varies according to
the paper type.
Cut Sheet(1 sheet)
A4 to the maximum print width
One sheet at a time
Touch See Guide to see the detailed on-screen
C
instructions.
When Load paper or Ready is displayed on the home screen, you
can open the cut sheet cover and load a cut sheet into the printer.
After you load a cut sheet, make sure to select Cut Sheet (1sheet)
in step B. Otherwise, the printer cannot detect the loaded cut sheet.
4
These pages explain how to get the printer ready for printing.
Carefully follow these steps to get optimum print quality.
Set the Paper Type and Paper SizePrint
The setting items vary according to the paper.
If you select a paper type or size that does not match the loaded paper,
the printout will have creases, ink smudges, or banding.
Press OK after you complete
the settings
Paper TypePaper
Remaining
Amount or
Paper Size
When Ready is displayed, you can
start printing.
You can load roll paper and then load cut
sheets on the auto sheet feeder. The printer
driver allows you to select either of these two
paper sources.
Promptly select the settings because the paper will start being fed if
the screen is not used for 90 seconds.
Epson Special Paper
Select the paper name printed on the paper package.
Non-Epson Paper
Select one of the following.
- Plain Paper
- Coated Paper <Generic>
- Photo Paper <Generic>
- Tracing Paper
- Tracing Paper <LowDuty>
- Matte Film
5
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.