To purchase any of these mounting
options please contact Egan Customer
Service
TOP MOUNT MARKERBOARDS
WALL MOUNT MARKERBOARDS
SYSTEM EGANBOARDS
1 Adjust bracket to match screen thickness and join with
appropriate dovetail slot, as shown in picture
2 When the bracket is assembled, attach the Locking Clip
(thinner of the two pieces provided), as in picture
3 Slide edge of Bracket under frame on the back of the board,
as shown in picture
as shown in picture
4 Hook the inside edge of the Pen Tray to the inside edge of
the frame on the back of the board, as shown in picture
Rotate the Pen Tray forward so that it clips to the bottom of
the frame. You will feel it snap into place.
C, and lock by twisting towards corner,
D.
SPACER
A.
B.
E.
B
A
LOCKING
CLIP
1 Remove bracket taped to back of EganBoard, and line up
with center of mounting area as shown in picture
2 Fasten Bracket to wall using two suitable fasteners as
shown in picture
3 Hang EganBoard over the bracket, picture C with its
corresponding angle, picture
4 Double-sided tape on the back in bottom corners ensures
complete stability.
5 Hook the inside edge of the Pen Tray to the inside edge of
the frame on the back of the board, as shown in picture
Rotate the Pen Tray forward so that it clips to the bottom
of the frame. You will feel it snap into place.
B.
D.
A.
E.
A
B
BRACKET
1 All EganBoards come with four hooks which you attach to
the back of the frame, near each corner with the screws
provided, picture
2 To ease installation position hooks so they align with the
hole pattern on the slotted track.
3 To insure hooks are completely seated you can extend the
hooks as shown in picture
Warning: Hooks must be completely seated for
safe installation.
4 Hook the inside edge of the Pen Tray to the inside edge of
the frame on the back of the board, as shown in picture
Rotate the Pen Tray forward so that it clips to the bottom
of the frame. You will feel it snap into place.
A.
B.
C.
PEN
TRAY
C
A
C
BACK
E
BACK BACK
FRONT FRONTFRONT
D
PEN
TRAY
D
E C
PEN
TRAY
B