Page 1
®
Control Panel Functions
Quick Reference
Memory button
Selects, saves, or deletes userdefined copy job memories.
Color/Black button
Switches between color
and monochrome
modes.
face-down tray
face-up tray
Copyright© 2000 by SEIKO EPSON CORPORATION, Nagano, Japan
Face Down/Face Up button
Switches between the faceup tray and face-down tray.
Touch screen
Sets various copy
functions.
Reset button
Sets all copy job settings
to default values.
Copy
Advanced
Admin button
Displays the administrator’s
mode selection screen.
Available settings:
Key Tone
Standby Control
Auto Feed
Set Default Copy Job
Color Calibration
Select Language
Restore Default
Numeric key pad
Used to enter the number
of copies, the zoom ratio,
and other values.
Stop button
Stops copying.
Start button
Starts copying.
Power light
On when the printer is on.
Ready light
On when ready to copy.
Error light
On when an error occurs.
(See “Error Messages” on
page 4.)
4012842-00
XXX
Page 2
Touch Panel Functions
The following screen appears when the copy station is ready for copying.
Ready to Copy
Shows the current paper size,
document orientation, and
paper type.
Sets the zoom ratio and
displays the current
zoom ratio.
Reduces the copy size.
Enlarges the copy size.
Adjusts brightness.
Displays the colo r adjustment mode
selection screen. Available settings:
Contrast
RGB Adjust
Saturation
Hue
A4
Plain
Reduce Enlarge
DarkerLighter
Adjust Advanced
Displays the advanced cop y mode
selection screen. Available settings:
Join Pages
Margin
Split Pages
Remove Shadows
Collate
LC1
Paper
Type: Magazine
1-Sided
1-Sided
Copy
Shows the number of copies.
Selects a paper source, size,
and document orientation.
Selects a document type.
Available settings:
Photo
Text
Magazine
Map
Detail
Selects 1-sided/2-sided
printing modes.
2
Page 3
Document and Paper Source Orientation
Place your document on the
scanning table with the side to
be scanned facing down.
corner of the
document
2 ± 1.5 mm
2 ± 1.5 mm
Document
An area 2 ± 1.5 mm in from
both horizontal an d vertical
rulers will not be scanned.
When copying A4, Letter, Executive, or B5 size documents, select the paper source setting that matches
the orientation of the document on the document table. See the figure below.
When placing a document horizontally
Document table
MP tray MP tray
Setting on paper
selection screen:
A4
Letter
Executive
B5
When placing a document vertically
Document table
Paper cassettePaper cassette
Setting on paper
selection screen:
A4
Letter
Executive
B5
3
Page 4
Error Messages
The following error messages will appear on the touch screen when an error has occurred in the copy station.
Copy system errors Printer errors
Display on the control panel Details and Solution
System Error
Internal Error
Restart
System
System Error
Fatal Error
Restart
System
System Error
Paper Error
Press the Stop button
System Error
HDD Full
Press the Stop button
Restart System.
(1) Turn off the scanner and
the printer.
(2) Wait for approximately
three minutes, and then turn
the devices back on.
(3) If the same message
reappears, this may indicate
malfunctioning interface
boards.
In this case, contact your
dealer or the closest customer
support services for assistance.
A document that cannot be
scanned is placed on the
scanner.
Press the
check the document type.
In the Collate mode, scanning
cannot be completed
because the optional Hard
Disk Unit is full.
Press the
cancel the copy job.
y stop button, and
y stop button to
Printer error messages are displayed on both the copy
station’s touch screen and on the printer’s LCD panel.
When an error occurs, see the section about error
messages in the EPSON AcuLaser Color Copy Station
8500 Reference Guide or in the printer’s Quick Reference
guide, then try the solutions provided.
Scanner and calibration errors
For scanner or calibration errors, see the section about
error messages in the EPSON AcuLaser Color Copy
Station 8500 Reference Guide.
Printed in Japan 00.xx.xx
4
Loading...