Epson 10000XL User Manual

Start Here

Epson Expression ® 10000XL

1

Unpack Your Scanner

1 Remove everything from the box.

Scanner

Power cord

Scanner

Software

CD-ROM

®

Adobe

Photoshop®

Elements
CD-ROM

User’s Guide

USB cable

MonacoEZcolor®

CD-ROM

If you have the Photo version of the scanner, the following items are

also included.

Transparency
unit

Transparency
guide

Film holders
(two of each type)

LaserSoft Imaging™

SilverFast® Ai 6

CD-ROM

2 Remove all the tape and packing material inside and around the

product.

2

Install the Software

Wait! You must install your software before connecting the scanner to
your computer. The installation may take several minutes. Be sure to close
all open programs and turn off any virus protection programs.

EPSON Scan works with Windows® Vista,™ XP, and 2000, and Macintosh®
OS X 10.2.x, 10.3.9 to 10.4.x. Follow the steps in the section for your
operating system.

Windows

1 Insert the Scanner Software CD-ROM in your CD-ROM or DVD drive.

With Windows Vista, if you see the AutoPlay window, click Run

Epsetup.exe. When you see the User Account Control screen, click
Continue.

2 Read the license agreement and click Agree. The Software Installation

screen appears.

3 Click the Install button.

4 When you see a message that installation is complete, click Exit.

5 Follow the on-screen instructions to register your scanner, then remove

the CD-ROM.

If you want to use any of the bonus software included with your scanner,
insert the CD-ROM for the software you want to install, and follow the
on-screen instructions. Some software may not be compatible with
Windows Vista.

Macintosh OS X

1 Insert the Scanner Software CD-ROM in your CD-ROM or DVD drive.

2 Double-click the Epson CD-ROM icon on the desktop.

3 Double-click the Epson icon.

4 Read the license agreement and click Agree.

5 When you see this screen, click the Install button.

6 Enter your name and password, if required, then click OK. Read the

license agreement and click Accept.

7 When you see this screen, click Install.

8 When the installation is done, click Quit.

9 When you see a message that installation is complete, click Exit.

10 Follow the on-screen instructions to register your scanner, then remove

the CD-ROM.

If you want to use any of the bonus software included with your scanner,
insert the CD-ROM for the software you want to install, and follow the
on-screen instructions.

3

Install the Transparency Unit

If you have the Photo version of the scanner, you need to install the
transparency unit.

1 Fully open the scanner’s document cover, then lift it straight up.

2 Lower the transparency unit onto the scanner, so that the pins fit into

the holes as shown.

3 Use a coin to turn the transportation lock to the Unlock position.

4 Close the transparency unit.

5 Connect the transparency unit cable to the scanner’s OPTION port, then

tighten its screws.