E Power 7198 43 User Manual

65mm

75mm

7198-43

Bluetooth Speaker with Qi Charging Pad

User Manual

COMPONENTS INCLUDED:

1 x Qi charging Speaker
1 x User Manual
1 x Charging Cable

DESCRIPTIONS OF EACH KEY:

Long press: Power On/Off

①

Short press: Mode Selection
Short press: Volume up

②

Long press: Move to previous music
Short press: Volume down

③

Long press: Move to next music

①

②

③

④

⑤

⑥

Page 1

④ Pause or play the music/ Answer an incoming call or end

a call/ Set clock

AUX in/Reset Port

⑤

⑥ Charging Port

BLUETOOTH SPEAKER OPERATION:

>>Long press

① for 3 seconds to turn on the speaker, short

press ① enter to Bluetooth mode, Screen will show “BL”.

>> Look for “Qi speaker” appear on the list of Bluetooth
devices from your device. Type Password “0000” or “1234”
if requested.
>>When successfully paired and connected, an alert tone
will issue from the unit.

Qi Wireless Charging Function:

>>Turn on the speaker, put your mobile which support Qi
function on the speaker, your mobile will be charged
automatically.

Page 3

Page 2

Clock Function:

>>Set time: Turn on the speaker, the LCD screen will show

the time. The 2 dots will be flashing. Long press ④ to activate

setting of time. Short press ④ to choose hour and minute for

setting. Complete setting through pressing ②/③. Long press

④ to confirm setting.

>>Set alarm: Turn on the speaker, the LCD screen will show

the time. Short press ④ enter to alarm function, the 2 dots

will be stop flashing. Long press ④ to activate setting of alarm.

Short press ④ to choose hour and minute for setting.

Complete setting through pressing ②/③. Long press ④ to

confirm setting.

AUX Function:

Use a 3.5mm Aux-in cable to connect your device through the
AUX in port.

Page 4

SAFTY INFORMATION:

Avoidsources of intense heat or flame.
Do not insert metal objects into item. (Shirt circuit risk)
Do not attempt to repair the device. Rather, contact a service
Professional.

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 5 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

Page 4Page 3