10-Jan-20191/1
EPOCH DESIGN, LLC
Pacica Media Console
5309: PM-OS-EC-ES 5019: PM-OS-EC-GR
Congratulations on the purchase of your Pacica Media Console. It has been crafted to the highest
standards of quality and safety and will give you many years of enjoyment and practical use.
Since this is a natural wood product there will be variations in color and grain, and minor wood grain
checking may occur. This is normal and does not compromise the integrity of your console. Variation
in the character of wood is integral to the beauty and appeal of this furniture, and distinguishes it from
lower quality materials.
On this insert you will nd a list of the hardware and parts necessary for assembly, as well as detailed
instructions. Assembly is quite simple and requires only a Phillips Head Screwdriver.
Adjust the shelf height by
1
removing the top shelf pins,
removing the shelf at an angle
and inserting the lower pins
into pre-drilled holes at the
desired height.
To install the handles, unscrew the handles
3
from the inside of the drawers and doors.
Place the handles on the outside, insert
the screws through the inside of the
pre-drilled holes and tighten with a
athead or Phillips head screwdriver.
Replace the shelf at an angle
2
then maneuver the shelf
carefully onto the shelf pins.
*NOTE: Do not turn handles to tighten or
loosen the screws. Doing so will cause the
handle to scratch surface of the console.
I
II
If you should require assistance with assembly, part replacement or any other matter, contact the
toll-free Epoch Design Service Center from anywhere in the Continental United States, Monday
through Friday, 9 AM – 5 PM Pacic Standard Time at 1-800-589-7990. You may also email your
request or comments to info@epochbydesign.com and a service representative will respond.
HAVE QUESTIONS OR CONCERNS? CALL US FIRST: 1-800-589-7990
Copyright © 2018 Epoch Design™ All rights reserved
Thank you and Enjoy
Loading...