Turning O Alarms Erasing Alarms
When the timer beeps with the red
light ashing that means its time for
you to take your medications.
Check to see which number (1-4) is ashing
on the right bottom of the display screen.
If the number “1” is ashing, it is time to
take your rst dose of pills. Press the STOP
button to stop the beeping & ashing light,
and take the pills from pillbox “1”.
The same should be done for alarm
“2”, “3”, and “4”.
Alarms will automatically reset at midnight
each day and will repeat at the same time
each day.
MISSED PILL INDICATOR
If “STOP” button is not pressed when
the alarm is sounding, the alarm number
will than be shown with an X meaning
“MISSED PILL”.
To erase an alarm, simply press
MODE until you reach the alarm you
want to change (1-4) .
Once you have reached the correct
alarm hold down SET until
- - : - -
appears.
Press SET twice and only the current
alarm number (1-4) will blink
on the screen.
Press MODE to reach the remaining
alarms and time.
www.epill.com| 1-800-549-0095Printed in China
1. Slide open
the battery door
by pushing down
on the arrow
rmly with your
thumb.
Replacing the Batteries
2. Insert 2 AAA size batteries, making sure
the negative (-) and positive (+) terminals are
placed correctly. We recommend using two
alkaline batteries.
3. Put the battery compartment cover back
and lock it into place.
This e-pill Medication Reminder is only a supplement
to any memory system that you currently use to
remind yourself to take medications. The user
maintains full responsibility to administer medication
at the appropriate times. e-pill, LLC assumes no
responsibility for any incidental or consequential
damages, including but without limitation, damages
or injuries resulting from malfunction of the product.
e-pill,LLC’s liability shall in no circumstances exceed
the amounts paid by the user for the timer.
Disclaimer
Daily Use