OPERATING INSTRUCTIONS
FOR
me∆os
e-pill
VIBRATING
6 ALARM MEDICATION
REMINDER
ROLAND the apple pro production inc
Box 4189, SE-227 22 Lund, Sweden
e-pill, LLC | 70 Walnut Street | Wellesley, MA 02481, USA
Phone (781) 239-8255, Fax (781) 235-3252
MeDose
WATCH
Manufacturer:
Distributor:
Toll-Free 1-800-549-0095
Order your e-pill MeDose on-line: www.epill.com
Version 030723
e-pill
MeDose
OPERATING INSTRUCTIONS
e-pill Medose Vibrating 6-Alarm Medication Reminder Watch
BASIC FUNCTIONS
FEATURES
The e-pill Medose Vibrating Medication Reminder Six
Alarm Watch is an innovative device to help improve
patient compliance.
• Up to 6 daily alarms
• Choice of vibration or sound alarm
• No alarm reset required
• 5 modes of operation: Normal Time, Dual Time
Zones, Alarms, Count Down Timer &
Chronograph
• Easy to read large display with back light
HOW TO SET THE CORRECT TIME
• Tap button C until mode prompt "TIME" is
reached.
• Press & hold button D for 5 seconds to enter
setting mode. The seconds will start flashing
• Tap C
• Tap A until the correct Hour
note the PM indicator above the Seconds
• Tap C
• Tap A until the correct Minute
• Tap C
• Tap A until the correct Year
• Tap C
• Tap A until the correct Month
(1=January, 2=February … 12= December)
• Tap C
• Tap A until the correct Day of the Month
reached.
• Tap C
• Tap A until the correct Day of the Week
reached. (TU=Tuesday, TH=Thursday)
• Tap C
• Tap A if you want military time (24 hour clock).
• Tap D to leave setting mode
Congratulations - you have now set your MeDose
watch to the correct time.
is reached. Please
is reached.
is reached.
is reached
is
is
.
BACK LIGHT
Tap button D for Back Light (3 seconds illumination).
CHANGE DISPLAY
Press button C to change displays. The sequence is
as follows:
->TIME ->ALARM ->TMER ->CHRONOMETER ->
VIBRATION or BEEP SOUND ALARM
Press & hold button A for 5 seconds to toggle between
Vibration
in the display (top left) when the MeDose is in
Vibration mode.
The alarm lasts for 20 seconds. Tap any button to stop
the alarm. The MeDose will give a brief alarm on the
hour if the chime function is on.
or Beep Sound alarm. A small “W” will appear
HOW TO SET DAILY ALARMS
• Tap button C until mode prompt “ALARM”
(“AL-# ” or “Chime”) is reached.
• Tap button B to go to the alarm you want to set
(Alarm-1 is AL-1, Alarm-2 is AL-2, Alarm-3 is
AL-3, Alarm-4 is AL-4, Alarm-5 is AL-5, Alarm-6
is AL-6 and CHIME is the 7
For each DAILY alarm do the following:
• Press & hold button D for 5 seconds to enter
setting mode. The hours will start flashing.
• Tap A until the correct Hour
note the PM indicator above the Seconds.
• Tap C
• Tap A until the correct Minute
• Tap D to leave setting mode
Make sure ON is displayed next to the minutes. If
“ON” is not showing you can toggle to ON by
tapping A.
Proceed to your next alarm by tapping B
th
alarm).
is reached. Please
is reached.
.
.
RESET
Press all four buttons for 5 seconds and release. This
will re-set the internal computer (this only needs to be
done after a battery change).
HOW TO SET AN ALARM SPECIFIC DATE
AND TIME
• Tap button C until mode prompt "ALARM" is
reached.
• Tap button B to go to the alarm you want to set.
Alarm-1 is AL-1, Alarm-2 is AL-2, Alarm-3 is AL3, Alarm-4 is AL-4, Alarm-5 is AL-5, Alarm-6 is
AL-6 and CHIME is the 7
For each SPECIFIC alarm do the following:
• Press & hold button D for 5 seconds to enter
setting mode. The hours will start flashing.
• Tap A until the correct Hour
note the PM indicator above the Seconds.
• Tap C
• Tap A until the correct Minute
• Tap C
• Tap A until the correct Month
• Tap C
• Tap A until the correct Day of the Month
reached.
• Tap C
• Tap A for the correct Time Zone
• Tap D to leave setting mode
Make sure ON is displayed next to the minutes. If
“ON” is not showing you can toggle to ON by
tapping A.
Proceed to your next alarm by tapping B
Note The six (6) alarms operate independently. If
month & date of the alarm is set to "--", the alarm will
act as a daily alarm (no reset required).
th
alarm.
is reached. Please
is reached.
is reached.
is
(T1or T2)
.
.
HOW TO USE COUNT DOWN TIMER
The MeDose watch offers three count down timer
modes. Each mode can be up to 99 minutes and 59
seconds long (1 hour and 40 minutes).
• Tap button B to select Count Down Stop
Count Down Up (CU), or Count Down Repeat
(Cr) function.
Once you have made your count down selection:
• Press & hold button D for 5 seconds to enter
setting mode. The minutes will start flashing.
• Tap A until the correct Minute
• Tap C
• Tap A until the correct Second
• Tap C
• Tap D to leave setting mode
Use button A to start and stop the count down
timer.
Note
1. The Count Down Timer features 1 second
increments with a working range from 1 second
to 99 minutes 59 seconds.
2. The watch will sound 3 beeps at 3 minutes, 2
beeps at 2 minutes, and 1 beep at 1 minute
before the timer counts down to zero. The
watch will beep for 5 seconds when the timer
reaches zero.
3. When the timer is stopped, pressing button B
will change the timer function and the preset
time will be reloaded.
In Count Down Up (CU) function, as the time
counting up after the timer counts down to zero, an
arrow pointing upwards will be displayed.
Battery:
Replaceable CR2032 3V Button Cell
We suggest you take the watch to a
jeweler to have the battery replaced.
is reached.
is reached.
.
(CS),
is
HOW TO USE THE CHRONOGRAPH
The MeDose watch offers a precise and simple to use
chronograph (“stop watch”) function.
• Tap button C until mode prompt "Chron" is
reached.
Press button A to start the chronograph. "Run” will
be displayed.
• Tap button A to START and STOP.
• Tap button B to RE-SET the chronograph.
Press button B to record split and lap times. First, split
time and "SPL" will be displayed for 6 seconds and
then lap time and "LAP" will be displayed.
HOW TO SET THE HOURLY CHIME
The MeDose will give a brief alarm on the hour if the
chime function is on. A small “bell” will appear in the
display (top left) when the chime function is on.
• Tap button C until mode prompt "ALARM" is
reached.
• Tap button B to go to CHIME (chime is the” 7
Alarm”)
• Tap A to toggle between chime (“ON” and
“Bell Symbol”) or off (“—“ ).
th
OPERATION OF BUTTONS
A 1) Select vibration or sound (press & hold)
2) Alarm & chime (arm or disarm)
3) Start or stop the timer
4) Start or stop the chronograph
5) Set/advance digits
B 1) View normal time or dual time
2) Select normal or dual time (press and hold)
3) Select alarm or chime
4) Select timer function
5) Set "Split", "Lap" or re-set chronograph
6) Select setting digits (set)
C 1) Mode change
2) Select setting digits (set)
D 1) Back Light
2) Set (press and hold)
3) Reload preset timer
4) Fast escape from split/lap display
5) Exit set (set)
4) Fast escape from split/lap display
5) Exit set (set)
This watch is designed to help the wearer to remember
his/her medication on time. The manufacturer ROLAND,
the apple pro production inc assumes no responsibility
whatsoever for any inconvenience or non-compliance to
medications in the event the watch fails to function.
WARNING:
This Operating Instruction is protected by copyright.
©Copyright e-pill, LLC, 2001, 2002, 2003 e-pill®,
MeDos and Medose are trademarks owned by
ROLAND, the apple pro production inc or by e-pill, LLC
GUARANTEE
ROLAND, the apple pro production inc, covers
manufacturing defects for one year from date of purchase.
Battery, straps, glass or damage cased by misuse
is not covered.
In case of defect, send the watch to:
ROLAND, the apple pro production inc
Service Center
Box 4189
SE-227 22 Lund
Sweden
Distributor in the USA, Canada and Mexico
e-pill, LLC
70 Walnut Street
Wellesley, MA 02481, USA
781-239-8255 or Toll-Free:
800-549-0095
Order on-line: www.epill.com fax 781-235-3252
Version 031003
Loading...