Epic Fitness EPEX3905.0 User Manual

Model No. EPEX3905.0
Serial No.

Serial

Number

Decal

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.

USER'S MANUAL

CALL TOLL FREE:

1-866-997-6999

Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:

www.iconservice.com

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Keep this manual
for future reference.

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

AINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

M

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS

WARNING:

tions before using the exercise cycle.

1. Read all instructions in this manual and all
warnings on the exercise cycle before using
the exercise cycle.

2. Use the exerci se cycl e only as described in
this manual.

3. It is the responsibility of the owner to ensure
that all users of the exercise cycle are ade­quately informed of all precautions.

4. Use the exercise cycle indoors on a level sur­face. Keep the exercise cycle away from
moisture and dust. Place a mat under the
exercise cyc le to protect the floor or carpet.
Make sure that there is enough clearance
around the exercise cycle to mount, dis­mount, and use it.

5.

Inspect and properly tighten all parts regular-

. Replace any worn parts immediately.

ly

Keep children under the age of 12 and pets

6.
away from the exercise cycle at all times.

To reduce the risk of serious injury, read the following important precau-

7. The exercise cycle should not be used by
persons weighing more than 250 pounds.

8. Wear suitable clothes when using the exer­cise cycle; do not wear loose clothes that
could become caught on the exercise cycle.
Always wear athletic shoes.

9. Always keep your back straight when using
the exercise cycle. Do not arch your back.

10. If you feel pain or dizziness while exercising,
stop immediately and cool down.

11. The pulse sensor is not a medical device.
Various factors, including the user's move­ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

The exercise cycle is intended for in-home

12.
use only
commercial, rental, or institutional setting.

. Do not use the exercise cycle in a

WARNING:Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

2

BEFORE YOU BEGIN

Congratulations for selecting the new EPIC™ 300 U
exercise cycle. Cycling is one of the most effective
exercises for increasing cardiovascular fitness, building

ndurance, and toning the entire body. The EPIC 300

e
U exercise cycle offers an impressive array of fea-

ures designed to let you enjoy this healthful exercise

t
in the comfort and privacy of your home.

For your benefit, read this manual carefully before
you use the exercise cycle.

after reading this manual, see the front cover of this
manual. To help us assist you, mention the product

If you have questions

Handlebar
Water Bottle Holder*

Bookrack

model number and serial number when calling. The
model number is EPEX3905.0. The serial number can
be found on a decal attached to the exercise cycle

see the front cover of this manual for the location of

(
the decal).

To avoid a registration fee for any service needed
under warranty, you must register the exercise
cycle at www.iconservice.com/registration.

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Fan

Console

Pulse Sensor

Upright

Seat
Seat Knob

Seat Post Knob

Wheel

Pedal Strap

Pedal

*No water bottle is

included

CAUTION: There is a warning decal on the exercise cycle in the location shown. If the decal
is missing or illegible, call the toll-free telephone number on the front cover of this manual
and order a free replacement decal.

Apply the decal in the location shown.

Leveling Foot

3

ASSEMBLY

M8 Split Washer

(55)–18

M8 Nylon

Locknut (63)–4

M4 x 16mm Screw

(57)–5

M8 x 25mm Patch Screw

(59)–4

M8 x 40mm Button Screw

(54)–12

To hire an authorized technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

ssembly requires the included tools and your own adjustable wrench .

A

Use the drawings below to identify the small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 18. The number after the parentheses is the
quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a part is

not in the parts bag, check to see if it has been preassembled.

1. Identify the Front Stabilizer (15). While anot her per son
lifts the front of the Frame (1), attach the Front
Stabilizer to the Frame with four M8 x 40mm Button
Screws (54) and four M8 Split Washers (55).

1

1

15

55

54

55

54

4

2. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (16) to the Frame with four

8 x 40mm Button Screws (54) and four M8 Split

M
Washers (55).

2

1

6

1

55

3. While another person holds the Upright (2) in the posi-

tion shown, connect the Upper W
the Lower Wire Harness (43).

upper end of the Upper Wire Harness to remove
the slack from the Wire Harnesses.

Make sure that the Upright (2) is turned so the top
slopes down in the direction shown.
Upright onto the Frame (1). Be careful to avoid pinch­ing the Wire Harnesses (42, 43). Attach the Upright

with four M8 x 40mm Button Screws (54), four M8 Split
Washers (55), and three Upright Spacers (76). Make

sure that the curved sides of the Spacers are fac­ing the Upright.

ire Harness (42) to

Carefully pull the

Slide the

3

Top must

slope down in

this direction.

54

55

55

54

2

76

76

1

42

43

54

Do not pinch the

Wire Harnesses

(42, 43) during

this step.

55

54

4. Hold the Handlebar (3) near the Upright (2). Feed the

Upper Wire Harness (42) up through the indicated hole
in the Handlebar. Attach the Handlebar to the Upright
with two M8 x 25mm Patch Screws (59) and two M8
Split Washers (55). Be careful to avoid pinching the

Upper Wire Harness.

4

59

55

3

Hole

42

2

Do not pinch

the Upper

ire Harness

W

(42) during

this step.

5

5. Have another person hold the Console (4) near the

Handlebar (3).
Connect the Upper Wire Harness (42) to the wire har-

ess on the Console (4). Locate the ground wire that is

n
connected with a screw to the Handlebar (3). Connect
the ground wire to the smallest wire on the Console.
Next, locate the pulse wire extending from the
Handlebar and connect it to the corresponding wire on
the Console.

Attach the Handlebar Cover (5) to the Handlebar (3)
with an M4 x 16mm Screw (57).

Carefully insert all excess wires into the Console (4).
Attach the Console to the metal plate on the Handlebar
(3) with four M4 x 16mm Screws (57).

avoid pinching the wires.

Be careful to

5

4

3

57

Do not pinch

the wires during

this step.

Ground

ire

W

42

Pulse

Wire

5

57

6. Turn the Seat Post Knob (20) counterclockwise two or

three turns to loosen it. Next, pull the Knob, raise the
Seat Post (8) a few inches, and then release the Knob.

Move the Seat Post up and down slightly until the
pin on the Knob snaps into one of the holes in the
Seat Post. Then, turn the Knob clockwise until it is

tight.
Attach the Seat Bracket (7) to the Seat Post (8) with

two M8 x 25mm Patch Screws (59). Make sure that

the Seat Bracket is oriented so the slot is on the
indicated side.

7. Attach the Seat (9) to the Seat Carriage (11) with four

M8 Nylon Locknuts (63) and four M8 Split Washers
(55). Note: The Nylon Locknuts and Split Washers
may be preattached to the underside of the Seat.

Slide the Seat Carriage (11) into the Seat Bracket (7),
and move the Seat Carriage to the desired position.
Insert the Seat Knob (10) into the slot in the side of the
Seat Bracket, and tighten the Seat Knob into the Seat
Carriage.

6

7

8

7

9

7

59

Slot

20

11

10

55

63

6