Epic EPTL796100 Owner's Manual
Model No. EPTL79610.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT CON-
TACT THE STORE; please contact
Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
USER'S MANUAL
CALL TOLL-FREE:
1-866-997-6999
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.iconservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
I
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the
warning decals. If a decal is missing or il-
legible, see the the front cover of this
manual and request a free replacement
decal. Apply the decal in the location
shown. Note: The decals may not be shown
at actual size.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and in-
structions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. Before beginning this or any exercise program, consult your physician. This is especially important for persons over age 35 or
persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
3. Use the treadmill only as described.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
11. When connecting the power cord (see page
14), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of
carrying 15 or more amps. No other appliance
should be on the same circuit. Do not use an
extension cord.
12. Use only a single-outlet surge suppressor that
meets all of the specifications described on
page 14. To purchase a surge suppressor, see
your local EPIC dealer or call the telephone
number on the front cover of this manual and
order part number 146148, or see your local
electronics store.
13. Failure to use a properly functioning surge
suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow,
accelerate, or stop unexpectedly, which may
result in a fall and serious injury.
14. Keep the power cord and the surge suppressor away from heated surfaces.
7. Keep children under age 12 and pets away
from the treadmill at all times.
8. The treadmill should be used only by persons weighing 325 lbs. (147 kg) or less.
9. Never allow more than one person on the
treadmill at a time.
10. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
15. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
TROUBLESHOOTING on page 29 if the treadmill is not working properly.)
16. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 16).
17. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
3
8. The treadmill is capable of high speeds.
1
Adjust the speed in small increments to
avoid sudden jumps in speed.
3. When folding or moving the treadmill, make
2
sure that the storage latch is holding the
frame securely in the storage position.
9. The pulse sensor is not a medical device.
1
Various factors, including the user's move-
ent, may affect the accuracy of heart rate
m
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
20. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and press the power switch
into the off position when the treadmill is not
in use. (See the drawing on page 5 for the location of the power switch.)
21. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 28.) You
must be able to safely lift 45 lbs. (20 kg) to
raise, lower, or move the treadmill.
22. Do not change the incline of the treadmill by
placing objects under the treadmill.
24. Inspect and properly tighten all parts of the
readmill regularly.
t
25. Never insert or drop any object into any
opening on the treadmill.
DANGER: Always unplug the power
26.
cord immediately after use, before cleaning
the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
27. The treadmill is intended for in-home use
only. Do not use the treadmill in any commercial, rental, or institutional setting.
28. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary EPIC™
TL 1700 treadmill. The TL 1700 treadmill offers a selection of features designed to make your workouts at
home more enjoyable and effective. And when youʼre
not exercising, the unique treadmill can be folded up,
requiring less than half the floor space of other
treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
Accessory Tray
Handrail
ing this manual, please see the front cover of this manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Console
Fan
Pulse Sensor
Key/Clip
Walking Belt
Foot Rail
Idler Roller
Adjustment Bolts
Power Switch
Power Cord
Wheel
Platform Cushion
5
ASSEMBLY
#8 x 3/4"
Screw (1)–12
#10 Star
Washer (3)–2
5/16" Star
Washer (4)–4
3/8" Nut (5)–5
#8 x 5/8"
Screw (7)–8
#8 x 1" Tek
Screw (8)–4
3/8" Star
Washer (9)–4
#8 x 1/2" Ground
Screw (16)–1
Base Foot Spacer
(87)–2
5/16" x 1" Bolt (12)–6
3/8" x 2" Bolt (2)–3
3/8" x 2 1/4" Bolt (6)–2
3/8" x 2 1/2" Bolt (10)–4
#10 x 1/2"
Bolt (11)–2
o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
T
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver and
adjustable wrench .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam-
aging parts, do not use power tools for assembly. Extra hardware may be included.
6
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
he treadmill onto its left side. Partially fold the
t
Frame (54) so that the treadmill is more stable.
o not fully fold the Frame until the treadmill
D
is completely assembled.
1
88
8
54
Attach two Base Feet (88) to the Base (85) in
the locations shown with two #8 x 1" Tek
Screws (8) and two Base Foot Spacers (87).
Then, attach the other two Base Feet (88) to the
Base with two #8 x 1" Tek Screws (8). Do not
overtighten the Tek Screws.
2. Attach a Wheel (92) to the Base (85) with a 3/8"
x 2 1/4" Bolt (6) and a 3/8" Nut (5). Do not over-
tighten the Nut; the Wheel must turn freely.
87
88
8
88
87
2
6
8
85
85
88
8
92
5
7
3. Identify the Right Upright (81), which is marked
with a “Right” sticker. Have a second person
hold the Right Upright near the Base (85) as
hown.
s
ee the inset drawing. Tie the wire tie in the
S
Right Upright (81) securely around the end of
the Upright Wire (79). Then, pull the other end
of the wire tie until the Upright Wire is routed
completely through the Right Upright.
3
79
81
79
Wire
Tie
81
Wire Tie
79
85
4. Have a second person hold the Right Upright
(81) against the Base (85), with the Right
Upright positioned as shown. Be careful not to
pinch the Upright Wire (79).
Attach the Right Upright (81) to the Base (85)
with two 3/8" x 2 1/2" Bolts (10) and two 3/8"
Star Washers (9). Note: If the Bolt (A) hits the
#8 x 3/4" Screw (1) attaching the Base Cap
(86), loosen the Screw several turns.
Firmly tighten the 3/8" x 2 1/2" Bolts (10). If necessary, retighten the #8 x 3/4" Screw (1).
4
81
79
86
1
9
A
10
85
8
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (54) so that the treadmill is more stable.
o not fully fold the Frame until the treadmill
D
is completely assembled.
5
111
85
Have a second person hold the Left Upright
(111) against the Base (85), with the Left
Upright positioned as shown.
Attach the Left Upright (111) to the Base (85)
with two 3/8" x 2 1/2" Bolts (10) and two 3/8" Star
Washers (9). If the Bolt (A) does not slide in
easily, see the instructions in step 4. Firmly
tighten the 3/8" x 2 1/2" Bolts (10).
Attach a Wheel (92) to the Base (85) with a 3/8"
x 2 1/4" Bolt (6) and a 3/8" Nut (5). Do not over-
tighten the Nut; the Wheel must turn freely.
With the help of a second person, tip the treadmill so that the Base (85) is flat on the floor.
6. Hold the Right Handrail (107), which is marked
with a “Right” sticker, near the console assembly. Insert the console wire into the hole in the
side of the Right Handrail and pull it out of the
hole in the top.
9
A
6
10
92
5
54
6
Attach the two Console Ground Wires (102) to
the bracket on the Right Handrail (107) with a
#8 x 1/2" Ground Screw (16).
Set the Left and Right Handrails (106, 107) on
the console assembly. Start two #8 x 3/4"
Screws (1) into each Handrail. Do not fully
tighten the Screws yet. Be careful not to
pinch the console wire.
Remove the wire ties from the Left and Right
Handrails (106, 107). If necessary, press the
Cage Nuts (35) back into place.
106
1
35
107
1
1
Console
Wire
35
Console
Assembly
1
16
102
9
7. Tighten two #10 x 1/2" Bolts (11) with two #10
tar Washers (3) into the Left and Right
S
Handrails (106, 107).
See assembly step 6. Tighten the four #8 x
3/4" Screws (1). Do not overtighten the
Screws.
7
11
3
Console
Assembly
11
3
106
107
8. Slide a Handrail Cover (108) onto the Left
Handrail (106) and onto the Right Handrail (107)
as shown.
8
107
108
108
106
10
9. Slide the Left Upright Cover (77) onto the Left
pright (111) and the Right Upright Cover (78)
U
onto the Right Upright (81) as shown.
9
81
111
77
78
10. Have a second person hold the console assembly near the Right Upright (81).
Connect the Upright Wire (79) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Remove the wire tie from the
Upright Wire. Insert the wires into the Right
Upright (81).
Make sure the Right Upright Cover (78) is positioned on the Right Upright (81) as shown.
Position the Left Upright Cover (not shown)
also.
10
Console
Assembly
Console
Wire
81
78
Wire
Tie
79
Console
Wire
79
11
11. Set the console assembly onto the Right Upright
(81) and Left Upright (not shown). Partially
tighten three 5/16" x 1" Bolts (12) with two 5/16"
tar Washers (4) into the Right Upright (81) and
S
the console assembly as shown; do not tighten
he Bolts yet.
t
Slide the Handrail Cover (108) up the Right
Handrail (107) slightly. Attach the Right Handrail
to the Right Upright (81) with two #8 x 3/4"
Screws (1). Start both Screws, and then
tighten each of them. Then, slide the Handrail
Cover down against the Right Upright.
1
1
12
4
81
Repeat this step on the left side of the treadmill. Then, fully tighten the six 5/16" x 1"
Bolts (12).
12. Slide the Right Upright Cover (78) up against the
console assembly. Attach the Right Upright
Cover to the console assembly with two #8 x
3/4" Screws (1).
12
12
107
108
1
Console
Assembly
Attach the Left Upright Cover (not shown) in
the same way.
1
78
Console
Assembly
1
12
Loading...