Epic EPTL141062 Owner's Manual

USER'S MANUAL

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

Serial Number Decal

Model No. EPTL14106.2
Serial No.

Write the serial number in the space
above for reference.

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.

CALL TOLL-FREE:

1-866-997-6999

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:
www.iconservice.com

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

HOW TO USE THE CHEST PULSE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING is attached in the center of this manual.

2

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it and two
feet on each side. Do not place the treadmill
on any surface that blocks air openings. To
protect the floor or carpet from damage, place
a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 350 pounds.

8. Never allow more than one person on the
treadmill at a time.

9. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.

Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

10. When connecting the power cord (see page 13),
plug the power cord into a surge suppressor
(not included). Plug the surge suppressor into
a grounded circuit capable of carrying 15 or
more amps. No other appliance should be on
the same circuit. Do not use an extension cord.

11. Use only a single-outlet surge suppressor that
meets all of the specifications described on
page 13. To purchase a surge suppressor, see
your local EPIC dealer or call the toll-free tele­phone number on the front cover of this man­ual and order part number 146148, or see your
local electronics store.

12. Failure to use a properly functioning surge
suppressor could result in damage to the con­trol system of the treadmill. If the control sys­tem is damaged, the walking belt may change
speed, accelerate, or stop unexpectedly,
which may result in a fall and serious injury.

13. Keep the power cord and the surge suppres­sor away from heated surfaces.

14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
TROUBLESHOOTING on page 26 if the tread­mill is not working properly.)

15. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 15).

16. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails while using the treadmill.

17. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

18. The pulse sensors are not medical devices.
Various factors, including the user's move­ment, may affect the accuracy of heart rate
readings. The pulse sensors are intended
only as exercise aids in determining heart
rate trends in general.

19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug the
power cord, and switch the reset/off circuit
breaker to the “off” position when the tread­mill is not in use. (See the drawing on page 6
for the location of the reset/off circuit breaker.)

20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 7, and HOW TO FOLD
AND MOVE THE TREADMILL on page 25.) You
must be able to safely lift 45 pounds (20 kg) to
raise, lower, or move the treadmill.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

3

21. Do not change the incline of the treadmill by
placing objects under the treadmill.

22. When folding or moving the treadmill, make
sure that the frame is held securely by the pin
on the latch knob.

23. Inspect and properly tighten all parts of the
treadmill regularly.

24. Never insert or drop any object into any
opening.

25.

DANGER: Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

26. The treadmill is intended for in-home use
only. Do not use the treadmill in any commer­cial, rental, or institutional setting.

27. To reduce the risk of electric shock, do not re­move the cover or the back of the television.
There are no user serviceable parts inside.
Refer servicing to qualified service personnel.

28. Upon completion of any service or repairs to
the treadmill or the television, ask the service
technician to perform safety checks to con­firm that the unit is in proper operating con­dition.

Note to CATV system installer: This reminder
is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that pro­vides guidelines for proper grounding and, in
particular, specifies that the cable ground
shall be connected to the grounding system
of the building, as close to the point of cable
entry as practical.

4

5

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on the
treadmill. If a decal is missing or illegible, call
the toll-free telephone number on the front
cover of this manual and order a free replace­ment decal. Apply the decal in the location
shown. Note: The decals may not be shown at
actual size.

Power Lines

Ground
Clamps

75 Ohm Terminal

Service

Entrance

Equipment

Power Service Grounding
Electrode System (e.g.
Interior Metal Water Pipe)

Service

Entrance

Conductors

6

Thank you for selecting the revolutionary EPIC™VIEW
700 treadmill. The VIEW 700 treadmill offers an im­pressive selection of features designed to make your
workouts at home more enjoyable and effective. And
when you’re not exercising, the unique VIEW 700
treadmill can be folded up, requiring less than half the
floor space of other treadmills.

For your benefit, read this manual carefully before
you use the treadmill. If you have questions after

reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number of the treadmill is EPTL14106.2. The
serial number can be found on a decal attached to the
treadmill (see the front cover of this manual for the lo­cation).

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Fan

Personal Television/Console

Book Holder

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Foot Rail

Power Cord

Rear Roller
Adjustment Bolts

Accessory Tray

Pulse Sensor

Adjustable Cushioned

Walking Platform

7

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver . For help
identifying the assembly hardware, see the drawings below. The number in parentheses below each drawing

is the key number of the part, from the PART LIST on pages 30 and 31. The number following the parentheses is
the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in

the parts bag, check to see if it has been preassembled. To avoid damaging plastic parts, do not use
power tools for assembly.

1. Make sure that the power cord is unplugged.

With the help of a second person, raise the front
of the treadmill and insert the crossbar on the
Base (83) into the cutout in the cardboard stand
as shown. Have the second person hold the

treadmill to prevent it from moving forward
or backward until assembly step 2 is com­pleted.

83

Cardboard

Stand

1

WARNING: Serious injury

may occur if the treadmill moves for­ward or backward and falls off the card­board stand. A second person must
hold the treadmill until assembly step 2
is completed to prevent the treadmill
from moving, tipping, or falling.

3/4” Screw (4)–4

Star Washer

(90)–10

Handrail Bolt (64)–6

Upright Bolt (72)–4

8

2. Identify the Left Upright (73) and the Right
Upright (74). Hold the Right Upright near the
Right Base Cover (77) as shown. Insert the
Upright Wire Harness (75) up through the rec­tangular hole in the bottom of the Right Upright
and out of the top of the Right Upright.

Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77). Be care-

ful not to pinch the Upright Wire Harness.

Attach the Right Upright (74) to the Base (83)
with two Upright Bolts (72) and two Star
Washers (90). Note: It may be necessary to tip
the tops of the Uprights forward slightly as you
thread the Upright Bolts (72) into the Uprights.

Hold Left Upright (73) near the Left Base Cover
(76), and insert the TV Cable (49) and the AV
Cable (97) up through the rectangular hole in the
bottom of the Left Upright and out of the top of
the Left Upright. Attach the Left Upright to the
Base (83) with two Upright Bolts and two Star
Washers (not shown).

With the help of a second person, lower the
treadmill off the cardboard stand.

83

76

75

77

2

74

73

49

97

90

72

3. Identify the Right Upright Sleeve (96) and the
Left Upright Sleeve (95). Slide the Right Upright
Sleeve onto the Right Upright (74), and slide the
Left Upright Sleeve onto the Left Upright (73).

95

“Right”

“Left”

96

3

74

73

9

4. With the help of a second person, hold the con­sole assembly near the Uprights (73, 74).

Connect the Upright Wire Harness (75) to the
Console Wire Harness (71). Make sure to con-

nect the connectors properly (see the inset
drawing). The connectors should slide to­gether easily and snap into place. If they do
not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM­AGED WHEN THE POWER IS TURNED ON.

71

Console

Assembly

4

75

74

5. Connect the TV Cable (49) and the AV Wire (97)
to the cables extending from the console assem­bly. Then, insert the connectors down into the
Uprights (73, 74).

Next, insert the brackets on the Handrails (99)
into the Right Upright (74) and the Left Upright
(73). Make sure that no wires are pinched.

49

73

97

5

74

99

6. Finger tighten three Handrail Bolts (64) with
three Star Washers (90) into the Right Upright
(74). Next, finger tighten three Handrail Bolts
with three Star Washers (not shown) into the
Left Upright (73). Then, firmly tighten the six
Handrail Bolts.

73

74

64

64

90

90

75

6

73

99

10

8. Note the location of the 75 ohm terminal and the

audio/video input jack on the treadmill. For the
television to operate, the included Audio/Video
Wire Harness (115) and your DVD player or VCR
must be connected to the audio/video input jack
on the treadmill, a personal audio/video player
must be connected to the audio/video plug on the
console, or a CATV cable must be connected to
the 75 ohm terminal (see page 11).

8

9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see page 27). To protect the floor or carpet

from damage, place a mat under the treadmill.

75 Ohm

Terminal

7. Slide the Right Upright Sleeve (96) up against
the console assembly. Attach the Right Upright
Sleeve with two 3/4” Screws (4).

Attach the Left Upright Sleeve (not shown) to the
Left Upright (73) as described above.

73

74

4

96

4

7

Audio/

Video

Input

115

HOW TO CONNECT A 75 OHM CATV CABLE

1. Connect a 75 ohm
CATV cable to the 75
ohm terminal on the
treadmill frame near
the power cord.

HOW TO CONNECT AN EXTERNAL SOURCE
USING A CATV CABLE

1. Connect one end of a 75 ohm CATV cable to the 75

ohm output jack on your external source.

2. Plug in the power cord of your external source. See

your external source’s user’s manual for proper
grounding instructions.

3. Connect the 75 ohm CATV cable to the 75 ohm ter-

minal on the treadmill frame near the power cord.

HOW TO CONNECT A DVD PLAYER OR VCR
USING THE AUDIO/VIDEO INPUT JACK

1. Connect one end of the included audio/video wire
harness to your DVD player or VCR.

2. Plug in the power cord of your DVD player or VCR.
See your DVD player or VCR user’s manual for
proper grounding instructions.

3. Connect the audio/video wire harness to the
audio/video input jack on the treadmill frame near
the power cord.

HOW TO CONNECT A PERSONAL AUDIO/VIDEO
PLAYER DIRECTLY TO THE CONSOLE

Locate the audio/video plug below the television on the
console, and plug it into a jack on your MP3 player, CD
player, or other personal audio/video player.

11

75 Ohm Terminal

75 Ohm CATV Cable

Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the
treadmill, a VCR or DVD player to the audio/video input jack, or a personal audio/video player to the
audio/video plug below the television on the console. Note: Use a CATV cable to connect to an external

source such as a cable box, analog cable, satellite TV box, or VCR. No CATV cable is included.